Baader Planetarium

• Baader UFC D58 Dovetail-Receptor Adapter
• Telescope-sided with mounting plate for UFC-Base (screws included)
• Camera-sided with D58 to mount S58 dovetail (screws included) – for correct alignment of the UFC filter slider on all Baader 2" prism and mirror star diagonals 
• Can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)

• Hyperion SP 54 thread protection ring
• Material: high quality silicone - non-aging, no chemical softeners, non smelling, not getting brittle over time
• Side lens hood, or goggles Protection (fast folding) for all Hyperion Aspheric and fixed focal length eyepieces with M43 thread

• Z-dovetail 200mm for Zeiss / Astro-Physics
• With mounting standard for Astrophysics 900* (*additional Astro-Physics adapter #1401155 required) / 600/400 / Mach 1 Mounts
• With two pressure-clamps (old designs)
• Not compatible with Vixen

• Multipurpose Quick Release IV (MQR IV) 9x60 for all 60mm finderscopes with diameters of up 72mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
• With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
• You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube.
• 4 mm hex wrench is included
• With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
• Quick and easily detachable – keeps its position with a precision of up to a hundredth of a millimeter

• Set consisting of four pieces 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
• Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• 36 mm filter holder also available as single item: 36 mm filter holder for Baader FCCT (3D-printed) (#2459088 , € 39,-)

• T-2 / M48 extension converts M48 female into T-2 female thread)
• Focusser side 48mm / 2" external thread (fits all 2" filters)
• Telescope side with T-2 internal thread
• 2.5mm optical path length

• Clamps all 3" (Losmandy) and EQ- (Vixen/Celestron/Skywatcher) dovetails - minimum dovetail length 190mm
• It is equipped with all the known fastening holes to be screwed on all mounts and all clamps of the known brand manufacturers.
• Length: 230mm, Max. Width: 153mm Weight: 1150g
• Optimised shape for as many contact points of the dovetail rail - thus a perfect grip
• Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)

• 3" / V or Z dovetail bars in customer specified lengths (up to 6000mm)
• Upon ordering please tell us exactly what the bar is used for, in order for us to make the correct drillings
• Optimum would be a drawing which states the requested drilling diameter (better too big than too small)
• The price is € 2,- per centimeter (1mm = 0,20 € ) If you need a dovetail bar in 40cm (400mm) length, the price would be € 80,-
• Black anodizing possible: please let us know upon ordering. Costs can be found at the order form
• Drillings of up to six holes or thread as per your needs. Prices for complicated drilling patterns, special milling or countersinking etc. will be discussed before production

• Tool for tension-free mounting and dismounting of hard-to-reach 2" Baader filters with milled grip crown.
• Suitable for all mounted Baader 2" filters with Low Profile Filter Cell (LPFC) - fit not guaranteed for older filters. Not suitable for filters of other manufacturers without grip crown or with unknown mount diameters.
• Included with the  Baader 2" Cool-Ceramic Safety Herschel Prism Mark II – (Visual / Photo) (various versions available) . This tool was originally developed for the Baader Herschel prism to make it easier to replace the installed filters.

• To connect Tak adapter M72 / M68 to Takahashi Mewlon reflectors
• This Mewlon Adapter, in combination with TAK Adapter M72 and the 2" Ultrashort eyepiece clamp (# 245 8196) results in an extremely short 2" eyepiece clamp for every Takahashi-Reflector (33mm optical path length in total).

• Baader Diamond Steeltrack Adapter with M68 female thread to connect M68 accessories according to Zeiss standard
• Special steel version for heaviest loads on the Baader Diamond Steeltrack focuser
• Replaces the standard clamp with the S58 dovetail ring
• Suitable for all Baader Diamond Steeltrack® (BDS) focusers

• 2" ClickLock Diagonal Mirror
• Oversized 2 "dielectric lamda / 10 levels with 112mm optical length
• Mirror repels UV and IR radiation, provides high security at the solar observation in white light and with Ha-sun filters
• Scratch-resistant, hard-coated mirror surface for safe cleaning, scratch-resistant even in extreme conditions
• Baader 2" ClickLock clamp for ultrafast clamping action
• Removable 2" Safety Kerf nosepiece

• Visual and photographic UHC-L Nebula filter with highest transmission
• Ultra High Contrast L Filter blocks city lights and increases contrast of nebula and comets (C2 lines)
• Can be used as LED-opimized Luminance filter for RGB-Imaging wtih skyglow suppression
• Blue transmission optimized to block blueish skyglow caused by LED car- and streetlights.
• Creates a much brighter image than a conventional Nebula filter
• Ideal for deep-sky observers. This UHC-L filter is the perfect visual complement to narrowband OIII filters.
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Baader H-alpha / O-III / S-II Ultra-Narrowband Filter Set – Premium Grade
• 3.5 / 4 nm FWHM (to harmonize the exposure time from H-alpha with O-III / S-II), recommended for optical systems from > f/3.4
• For highest contrast even at strongest light pollution, minimizes star size, emphasizes finest nebula detail – indispensable under Bortle 9/8/7/(6) skies
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

We explicitly warn against observing the sun with a DeepSky 3.5 nm (equivalent to 35 Ångstroem) H-alpha narrowband filter, specialized solar chromosphere and prominence filters from SolarSpectrum start at 0.8 Ångstroem. Photographic experiments with a camera are theoretically possible, but by no means observe the sun with naked eyes – you endanger your eyesight!

• A Solar Shade made from Aluminium to clamp between any 2" connection
• Drilling for 2", (ø 50,8 mm)
• Use as shade (glare protection) for visual observation / imaging through eyepiece or camera
• Used to shade the eyepiece or camera viewing opening from direct solar radiation during photographic- or visual solar observation in the H-alpha region with narrowband filters from SolarSpectrum

• D-ERF (Dielectric Energy Reflection Filter) in different sizes
• Pre-filter to reduce heat during H-alpha observation with SolarSpectrum Filters
• Plane parrallel plate (without filter cell) with IR-Cut dielectric coating
• non-ageing sealed coating edges
• Half-Band-Width (HBW): 80 nm – see also graph
• Filter WITHOUT cell – 3D-printed filter cells - customized for your telescope, can be ordered in addition (not available as standalone product)

• T-2 Photo Adapter with 2" female thread
• Incl. 1¼" Filter holder
• NX4 (C90) / ETX (and SC!) Universal Photo Adapter
• Combination of the parts Baader 2" NX4 (C90) / ETX Expanding Ring (#2958500A , € 33,-) and Baader SC / HD Ultra Short T-Adaptor, 9mm optical length (#2958500B , € 51,-)