Baader heavy-duty 8" double mounting plate, for up to 100kg

More Views

Application Images

Images uploaded by Customers

No customer Image uploads yet. Add Your Review with Images

Baader heavy-duty 8" double mounting plate, for up to 100kg

# 2451559

€ 650.00 Price excl. German VAT tax (19%): € 546.22

In Stock

1 Review(s) | Add Your Review

8" (width 203mm) heavy-duty dovetail bar 570mm in total length, mounts onto heavy mounts such as 10Micron GM 3000 or GM 4000
requires one 8" Planewave Clamp (# 2451555 – see application images) for attaching the Double-Mounting plate onto the mount to move left and right.
allows dual mounting of two optical tubes side by side – with total instrument payload up to 100kg (~220 pound)
pre-drilled for most Baader-bars and clamps, eg.: Baader Pan EQ clamps 190mm, 230mm, 370mm or an additional 8" Planewave clamp

Qty:

Product Questions

Is this plate compatible with the 10 Micron clamps ie if you have two 10 Micron maxi clamps is the hole spacing on this plate compatible?
Simon

-1

Question by: Simon on Jul 26, 2020 10:08:00 AM | 1 Answer(s)

Related Articles

Baader Custom Developments for telescope installations

We received a question from our customer about our turn-key telescope solutions. It was actually only a short question, but we answer it in detail to show you what kind of benefit it provides, when ordering a complete telescope system from us. The question: Could you tell me what the OTA rings on the TEC140 in the attached image (from a Baader installation) are. I can see that the outer rings are the Baader heavy duty rings but what out the inner rings (inside the larger, outer rings). Do you sell these inner rings? Our answer: In short: Unfortunately we cannot offer these as regular purchasable products. In detail: these inner rings are always specially made for each complete telescope project where we supply all instrumentation ourselves. Only in this case we have the telescopes all in house for combining, can measure the EXACT tube diameters and fabricate matching contact-pressure rings, to stiffen out the tube(s), so that there is no chance at all that the tube itself is getting deformed from the three pressure pins of the outer heavy duty guiding rings. Such precaution is mandatory if the owner wants to do unguided imaging, since otherwise the tube will get...
read article
Dovetail-bars and -clamps - the “Missing Link” for your equipment

Mounting accessories connect telescope and mount - be it for a permanent setup or to make quick changes from one instrument to the next possible. We can offer several bars and plates, so that you can adapt almost every telescope: Modell V (EQ) bars and clamps - for Vixen / Celestron / Sky-Watcher / Synta and many more. (Base width of the bar's prism: 44 mm. Bar width of the side facing the telescope: 70 mm) Modell Z bars and clamps - for Zeiss / Astro Physics (Base width of the bar's prism: 40 mm. Bar width of the side facing the telescope: 70 mm) Modell 3" bars and clamps - for Losmandy / Astro Physics (large) / Celestron (large) (Base width of the bar's prism: 76 mm, equals 3". Bar width of the side facing the telescope: 105 mm) Special lengths up to 6.000 mm long V, Z and 3" bars The matching accessories All of our dovetail bars do have integrated, deepened marking lines over the whole length of the bar. They mark the exact center line of the bar, as well as the seperation of the screw holes of Celestron telescopes and Astro-Physics mounting rings, so that you can easily drill...
read article

Specifications

Additional Information

Manufacturer	Baader Planetarium
SKU (#)	2451559
Net weight (kg)	6.90
Bar length	570 mm
Dual mounting	Yes
Top plate mounting options	Pre-drilled for many bars and clamps, eg.: Baader Pan EQ clamps 190mm, 230mm, 370mm or 8" Planewave Clamp
Bar or Clamp?	Bar
Design	other

Reviews