Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451187
€ 425.00 Price excl. German VAT tax (19%): € 357.14- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Suitable as a pillar adapter flange to the
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 106 mm
-
# 2957165
€ 665.00 Price excl. German VAT tax (19%): € 558.82- High-precision, temperature-compensating focusing motor with toothed belt drive for heavy loads (up to 8 kg).
- Prepared for connection to all Baader Steeltrack® focusers (classic and Diamond).
- Contactless end sensor (homing switch) for precise, repeatable positioning to stored absolute positions
- Incl. hand controller with intuitive operation, can alternatively be controlled via PC with USB interface via ASCOM or SteelGO software (for Windows)
- Connection for temperature sensors and additional 12 V / 1A PWM current output, e.g. for dew cap heater
-
# 1451070
€ 186.00 Price excl. German VAT tax (19%): € 156.30- Input Voltage 110-240 volts, output voltage 24 V / 5 amps (factory setting)
- Connection cable fitting for GM 1000 HPS mount
- Short circuit protection
-
# 2459112
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Baader UFC 2" Filter Slider / Filter Container M48
- suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
- Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side
-
# 2455055
€ 6.50 Price excl. German VAT tax (19%): € 5.46- Hook and loop cable ties with Baader Planetarium logo
- Reusable and closable cable ties for bundling any kind of objects
- 20 mm x 150 mm
- Scope of delivery: 10 x Baader cable ties
-
# 2406101
€ 228.00 Price excl. German VAT tax (19%): € 191.60- High-quality lense system with apochromatic features, for magnifications from 2x
- Modular design for visual and photographic (VIP) use
- suitable for 1¼" and 2" focusers
-
# 2457635
€ 95.00 Price excl. German VAT tax (19%): € 79.83- suitable for mounts which need a higer voltage of 24V (this cable is equipped with connector for 10Micron GM1000 / GM2000)
- the Baader Planetarium Dual-Mode cable set allows you use two PowerTanks to power those mounts which need 24V, in this case for professional mounts like a 10Micron
- The cable is custom-made and only available directly through Baader Planetarium
-
# 2408337
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Baader Wide-T-Ring to connect Leica, Sigma, Panasonic-L cameras on the Astro T-2 system
- All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
- Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
- On the camera side: Leica, Sigma, Panasonic L-Mount
- Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch
-
# 2451150
€ 260.00 Price excl. German VAT tax (19%): € 218.49- suitable for VIXEN, CELESTRON CGEM (and other) mounts
-
# 2458248
€ 45.00 Price excl. German VAT tax (19%): € 37.82- Dustcap with M68 x 1 female (inner) thread
- Robust cap made of black anodized metal
- Dustproof closure for your accessories of the Baader / Zeiss M68 system
-
# 1508039
€ 22.00 Price excl. German VAT tax (19%): € 18.49- M 36.4 is standard of Vixen telescopes
- Telescope side external thread 36.4mm
- Focuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...)
- Optical path length = 0.5 mm
-
# 2957281
€ 118.00 Price excl. German VAT tax (19%): € 99.16- to connect Refractors with M93x1 inner threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
-
# 2454610
€ 165.00 Price excl. German VAT tax (19%): € 138.66- Fixed focal length of 10mm, 68° field of view – ease of view even at high magnifications!
- High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
- 1¼" and 2" barrels included, thus variable focal lengths
- Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible
-
# 2451188H
€ 535.00 Price excl. German VAT tax (19%): € 449.58- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Suitable as a pillar adapter flange to
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 150 mm
-
# 2408191
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Eyepiece barrel reducing 1¼ "on 24.5mm
- With filter thread M28.5 for 1¼ "eyepiece
- For clamping of eyepieces with 24.5mm diameter at 1¼ "eyepiece holder.
- 6.5mm optical path length
-
# 2957283
€ 39.00 Price excl. German VAT tax (19%): € 32.77- to connect to Skywatcher Refractors with M90x1 outer threads
- only suitable for BDS-RT Diamond Steeltrack® for Refractors
- Also fits RC telescopes with M90 thread, but may require an extension, otherwise the BDS-RT Steeltrack may not retract completely. See also the application picture and the following review of the BDS-RT Steeltrack: Fitting a 2-inch BDS-RT Baader Diamond Steeltrack Focuser to a Teleskop-Service GSO 8-inch Ritchey-Chretien
-
# 2456314
€ 122.00 Price excl. German VAT tax (19%): € 102.52- Glasspathcorrector Factor 1,25. Optical path length: ≥ -30 mm
- Insert diameter: ∅ 38 mm
- Suitable to insert into the Baader MaxBright (Classic and MaxBright® II)
- A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
- A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
- Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
-
# 2958590
€ 90.00 Price excl. German VAT tax (19%): € 75.63- M48 female thread Heavy Duty Quick Changer
- Creates with the Baader M48 Quick Changing Ring (#2958595 , € 52,-) a quick-change and rotating device with the highest load capacity
- Optical path length 11 mm
- Quick release clamping for heavy accessories - with brass-clamping
- The changing system fits between any M48 connection
- 1x Baader Metal M48 Dustcap with dovetail (#2958602 , € 25,-) included
-
# 2454824C
€ 48.00 Price excl. German VAT tax (19%): € 40.34- 2 " retrofit kit for Hyperion ClickStop zoom eyepiece, consisting of the adapter ring M45 / 2" inside, as well as our 2 " barrel.
- 1¼" Hyperion Clickstop-Zoom-Eyepiece can be upgraded into a 2"
-
# 1501620
€ 129.00 Price excl. German VAT tax (19%): € 108.40- Length: 530mm (20,5")
- Black anodized, without holes.
- Weight: 1070g
Shop By Brand
Shop By
- Price
- Stock Level
-
- (605)
- (38)
- (91)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (684)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)