![Baader Planetarium Baader Planetarium](https://assets.baader-planetarium.com/media/resized/150_150/aw_shopbybrand/image/b/a/baaderplanetarium-logo-200px.jpg)
Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2458621
€ 4,950.00 Price excl. German VAT tax (19%): € 4,159.66- RCU (Remote Calibration Unit) for Baches, included 3M fibre optic cable
- Allows wavelenght calibration of the complex BACHES Echelle-Spectrum
- Choose between manual or remote control
- With Thorim-Argon and Halogen lamp with fibre connection
Interactive Website with Calibration examples.
Learn More -
# 1452090
€ 155.00 Price excl. German VAT tax (19%): € 130.25- is set up on a pillar or leveling flange
-
# 2958043
€ 19.00 Price excl. German VAT tax (19%): € 15.97- for DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
-
# 2957261
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Holder to attach the Steeldrive II Controller to a 3" Dovetail
- Suitable for all 3" (Losmandy standard) dovetail clamps
- The controller is inserted into the holder and can be quickly removed for manual operation.
- The holder helps to lay cables cleanly for remote setup
-
# 2406101
€ 228.00 Price excl. German VAT tax (19%): € 191.60- High-quality lense system with apochromatic features, for magnifications from 2x
- Modular design for visual and photographic (VIP) use
- suitable for 1¼" and 2" focusers
-
# 2451021
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Allows quick changing of accessories such as Cameras, Spotting Scopes, Binoculars or small telescopes on the Astro & Nature tripod 1x included in Astro & Nature tripod scope of supply
-
# 2458252
€ 46.00 Price excl. German VAT tax (19%): € 38.66- With the S52/M68 adapter, all Baader Wide T-rings can be adapted directly to an M68 female thread. This allows your M68 telescope or accessories to be screwed firmly to your camera with the largest possible aperture.
- The S52/M68 adapter fits all S52 dovetail clamps (D52) - for example our S52-Clicklock #2956252 or the Canon Protective T-Ring #2958550
- Camera-side: S52 dovetail
- Telescope-side: M68x1 male thread
-
# 1508005
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Combo of M44 male and T-2 male threads
- T-2 (M42 x 0.75) thread
- To connect T-2 accessories / cameras / T rings to Zeiss telescopes
- Optical path length of 5mm
-
# 2454303
€ 7.50 Price excl. German VAT tax (19%): € 6.30- Varta V675HP 6 pieces
- Fits only the old, silver-colored lighting unit.
-
# 2458238
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Adapter with M68i x1 to M75a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 3.0" focusers with M75 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M75 x 1 male thread
- Part is used in our M75a x 1 ClickLock clamp #2956275
- Optical height: 8 mm, Inner diameter (clear aperture): 67 mm
-
# 2408150
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Telescope sided 2" nose piece barrel with safety groove and 2" female filter thread (M48)
- Eyepiece sided with countersunk T-2 thread for a variety of adaptions such as adapting to T-2 binoviewers as well as an M48 male thread (hidden beneath removeable M48 stopper ring).
- Effective optical length only 2.5mm.
- Also available as version with Safety-Kerfs and with extra-short T-2 thread (3mm):
Baader 2" / T-2 (M48) nosepiece with Safety Kerfs (#2458130 , € 45,-)
-
# 2957305
€ 8.50 Price excl. German VAT tax (19%): € 7.14- Binocular-Adapter made of ABS, for Sky-Surfer III
- for Binoculars with front tripod thread
- Single price. Included in scope of supply of Sky Surfer III
-
# 2455035
€ 43.00 Price excl. German VAT tax (19%): € 36.13- Baader USB / RS-232 converter cable (similar to Celestron Item Nr.18775), however, made in Germany
- To connect a device with RS 232 interface to the USB port of a laptop
- Required drivers for Windows, Mac and Linux can be found under the "Downloads" tab
-
# 2459088
€ 39.00 Price excl. German VAT tax (19%): € 32.77- 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 36 mm filter holders: 4x filter holder 36 mm for Baader FCCT (3D-printed) (#2459098 , € 134,-)
-
# 2454502
€ 73.00 Price excl. German VAT tax (19%): € 61.34- Steckhülse zum Anschluss von Zeiss-Diascope-Okularen an Teleskopen mit 2"-Okularaufnahme
- passend für die 1¼" Steckhülse #14 aus unserem Astro T-2 System
-
# 2957262
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Adapter cable from Steeldrive II Controller AUX Port to Cinch for common heat pads with up to 10W.
- It enables the precise temperature control of e.g. dew shield heaters, optical filters and instruments with of +/-0.1 degree accuracy via the AUX input.
- Connected directly to the Steeldrive controller
- The power can either be set in the SteelGo software, or you set a desired temperature for one of the temperature sensors. This prevents undesired heating of the telescope, because you keep the dew cap just above the dew point.
-
# 2457010
€ 37.00 Price excl. German VAT tax (19%): € 31.09- Universal Red Dot Mount RDM – holder for red dot finders with 70 mm height
- All metal design (rail part & base part)
- Weaver gun-rail standard 11mm standard gun rail – fits all Red Dot finders
- V-shaped dove-tail fits most finder-shoes of Celestron, Sky-Watcher, Vixen and Bresser telescopes – can be removed for third party platforms
-
# 2458230
€ 53.00 Price excl. German VAT tax (19%): € 44.54- Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
- Converts the M68 (Zeiss) female into a M54 male thread
- Telescope side M68 male thread, eyepiece side M54male thread
- Optical length: 5 mm
- Inner diameter: 51 mm, outer diameter: 76 mm
-
# 2458100
€ 87.00 Price excl. German VAT tax (19%): € 73.11- Precise focusing eyepiece holder 1¼"/T-2 (5mm focus travel)
- Requires only a slight turn of about 20" to securely lock any 1¼" eyepiece or accessory
- Eyepieces / CCD cameras sitting against rotation and are still not scratched!
- Telescope side with T-2 (M42 x 0.75) female thread.
-
# 2451530
€ 48.00 Price excl. German VAT tax (19%): € 40.34- V-dovetail, 70mm diameter
- Pairing Vixen / Synta / SkyWatcher / Celestron / Baader V - for GIRO II
- Massive EQ-clamp, black anodized, Weight: 150g
- To accommodate all terminal strips of Vixen GP / GPDX, Bresser, Synta, Skywatcher
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)