Tripod adapter flanges
-
# 2451120
€ 207.00 Price excl. German VAT tax (19%): € 173.95- suitable for Paramount MX mounts
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
- Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition
-
# 2451188
€ 535.00 Price excl. German VAT tax (19%): € 449.58- BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 100 mm
-
# 2451188H
€ 535.00 Price excl. German VAT tax (19%): € 449.58- Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Suitable as a pillar adapter flange to
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 150 mm
-
# 2451118
€ 111.00 Price excl. German VAT tax (19%): € 93.28- Suitable for Celestron CGX and CGX-L mount
- Suitable for the and Baader Hardwood Tripods as well as adaptable to Baader Steel Pillar with the Baader Medium Pillar (BMP) Levelling Flange for GM 1000 (#2451187 , € 425,-)
- Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.
-
# 2451516
€ 143.00 Price excl. German VAT tax (19%): € 120.17- is needed to connect the Pan Adjuster for adjusting the optical axis of parallel mounted telescopes (#2451515 , € 1185,-) to the L-350 mount from PlaneWave Instruments
- PAN-Adjuster with the corresponding adapter for L-350 is attached to the side port of the mount in order to be able to align second instruments, e.g. a RASA or Newtonian telescope, parallel to the main instrument and operate them simultaneously.
-
# 2451515
€ 1,185.00 Price excl. German VAT tax (19%): € 995.80- Compact, mobile rotary stage for adjustment of 3" or 8" PAN EQ clamps on double mounting plates or mounts of the L-Mount series.
- Makes it possible to adjust the optical axes of parallel mounted telescopes to each other.
- Mounts parallel to the main telescope on the side of the dual mount or on the side port of a PlaneWave L-mount to align and simultaneously operate secondary telescopes such as RASA-, or Newtonian telescopes parallel to the main telescope in the azimuthal or equatorial configuration. To connect the PAN adjuster to the L-350 mount, the Adapter to mount PAN-Adjuster to PlaneWave L-350 (#2451516 , € 143,-) is required.
- Push pull screws allow to adjust the angle of the installation plate to the rotation plate.
- Adjustment screws allow to adjust the rotational angle between the attachment plate and the rotation plate
- Cutouts and hole in the middle allows for cabeling
- Made of solid Dural Aluminum and connected with stainless steel clamping rings.
- Developed and manufactured at Baader Planetarium in Germany.
-
# 2451186H
€ 450.00 Price excl. German VAT tax (19%): € 378.15- BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- suitable as a pillar adapter flange to the Baader conical steel pillar [product sku="BHP2451220
- Overall height: 150 mm
- The steel pillar flange Steel pillar flange for GM 3000 mount (#1453090 , € 275,-) is needed
-
# 2451185H
€ 450.00 Price excl. German VAT tax (19%): € 378.15- BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
- Overall height: 150 mm
- The Steel Pillar Flange for GM 4000 Mount (#1454090 , € 290,-) is required
-
# 2451555
€ 540.00 Price excl. German VAT tax (19%): € 453.78- 8" (203mm) clamp width, gets mounted for example onto 10Micron GM 3000 or GM 4000
- Suitable for 10Micron/Baader 8" dovetail bar #1454540 as well as for Planewave OTA's CDK 17, CDK 20 and CDK 24.
- Pre-drilled on both sides to adapt Baader-Sidewings #2451558. Both sidewings allow the adaptation of balancing baseplates, eg..: Baader Baseplate 400mm #1500340 or Baader Pan EQ clamps 190mm, 230mm, 370mm
-
# 2451117
€ 143.00 Price excl. German VAT tax (19%): € 120.17- suitable for Celestron AVX mounts as well as for adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) in combination with Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-)
- the tripod adapter can also be mounted dircetly on the Baader Medium Pillar (BMP) Levelling Flange for GM 1000 (#2451187 , € 425,-) for adaptation on the Baader Medium Pillar (BMP), modal steel pillar with up to 250 kg payload capacity (available in 60 - 165 cm) (various versions available)
-
# 2451150
€ 260.00 Price excl. German VAT tax (19%): € 218.49- suitable for VIXEN, CELESTRON CGEM (and other) mounts
-
# 2451155
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Universal Base ring: fits Baader Tripod-Adapters onto short Steel-Pillar III
- Hole diameter 77mm, 6x M5 inner threads
-
# 2451145
€ 122.00 Price excl. German VAT tax (19%): € 102.52- suitable for Celestron NexStar SE / EVO and CPC telescopes (altazimuth) or wedge
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- Also fits onto Vixen-, Bresser- or Sky-Watcher tripods.
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2451106
€ 100.00 Price excl. German VAT tax (19%): € 84.03- GP-Tripod-Adapter / GP-Pillar-Flange-Adapter suitable for Vixen-SP/GP- and -GP-DX, Celestron Advanced-GT, EQ5, HEQ-5 Mounts, Bresser, Sky-Watcher
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- gets mounted directly on Baader Short Pillar III, the Universal Flange-Basis (#2451155) is NOT needed in this case
-
# 2451115
€ 122.00 Price excl. German VAT tax (19%): € 102.52- suitable for Celestron CGEM mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2451116
€ 122.00 Price excl. German VAT tax (19%): € 102.52- suitable for Celestron CGEM-DX- and CGE-Pro mounts
- Suitable for the and Baader Hardwood Tripods
- Attention: for Adaptation on Baader Short Pillar III w/o Flange Adapter (#2451150 , € 260,-) the Universal Base-Ring for Baader Short-Steel-Pillar III (#2451155 , € 61,-) is needed.
-
# 2451108
€ 110.00 Price excl. German VAT tax (19%): € 92.44- suitable for Celestron / Sky-Watcher, EQ-6, NEQ-6 und AZEQ-6 mounts
- suitable for the Baader T-Pod Aluminium tripods 75-110 cm and 95 - 130 cm as well as Baader Hardwood Tripods (discontinued)
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2451112
€ 186.00 Price excl. German VAT tax (19%): € 156.30- suitable for Zeiss 1b mount
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2451107
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen Sphinx mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- also fits onto Vixen-, Bresser- or Sky-Watcher tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2451109
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen AP mount
- suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripod
- attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition