Baader Planetarium

• Celestron Clean & Collimate (C&C) is only available in German language since this service can only be offered to customers that purchased their Celestron product from an authorized dealer in Germany. Please contact your local dealer - or Celestron.com for repair and service quotations

• Extension ring of 1 "C-mount female thread on T-2 external thread
• Allows very short connection

• Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis
• Mounts directly to the standard screw mount of all Planewave's common telescopes via the straight mounting block.
• Weights can be mounted in horizontal position at the rear of the OTA both "top" and "bottom". This makes it possible to balance the telescope in the vertical position as well.
• The Planewave Leveling-Set consists of
  • 1kg Leveling Weight Ø 75 x 30mm (#2951390 , € 101,-)
  • 2.5 kg leveling counterweight Ø 75x75mm, made of V2A stainless steel (#2951402 , € 143,-)
  • 150mm counterweight-shaft M14, Ø 16mm (#2451554 , € 80,-)
  • Mounting block for leveling counterweight bar M14 for PlaneWave Instruments CDKs (#2451549 , € 48,-)

Successor model for GM 4000:
Stabilized Poser-Supply for10Micron GM 2000 / GM 3000 and 4000

The new control of the mounts is again significantly revised and stabilized, which allows us to become more efficient on the power supply side as well.

The Baader OTP 600W is no longer produced and therefore replaced by the Stabilized Power-Supply for GM 2000 / GM 3000 and GM 4000 (#1452070 , € 230,-)

• Projection dome for the Baader Planetarium, sizes 2.5m and 3.5m diameter
• Geometrically correc half-globe, consiting of 8 segments of each 45° made of fiberglass reinforced polyester.
• Inner color matte white, outer color grey

• Baader UFC S70 / M48 (f) Adapter
• telescope-sided M48 inner thread
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to the
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 106 mm

• Robust and torsion-resistant binocular holder (L-shaped tripod adapter) made of 4 mm thick steel (no plastic, no aluminum)
• In contrast to many L-shaped bino-holders which are made from less rigid materials, the Bino-Stronghold enables the jitter-free mounting of binoculars (with ¼" thread in the binocular bridge) onto any tripod equipped w. ¼" photo-thread
• The "Stronghold" steel binocular-holder has a particularly slim design to accommodate small interpupillary distance for any binocular. Other "L-brackets" made of aluminum are much too bulky to allow the binocular to fold down and reach the innermost 10 mm of pupil spacing
• excellent in combination with the SkySurfer III red dot finder, as well as e.g. the Celestron SkyMaster 15x70 binocular

• BACHES M68 adapter adjustable, also in mounted state
• Allows to connect BACHES to the Baader (Zeiss) M68-System
• The M68-System allows attachment of BACHES to the most commonly used telescopes worldwide, also many cameras can be attached to this versatile system
• Optical length 0mm

• made of V2A stainless steel
• for axis diameter of 40 mm
• Diameter 185 x 60 mm
• 12kg

• 2" to 1¼" reducing piece with Bronze pressure ring and 8,5mm optical height
• Suitable for 2" focusers and clamps (e.g..: RT / SC Diamond Steeltrack or ClickLock 2" Mirror Diagonal)
• Includes clamp screw, safety nut and 2" filter holder (M48 inner thread)

• Baader CMOS RGB-G (490 – 580 nm) Bandpass Filter, suitable from f/15 to f/1.8
• Anti-reflection RGB filter (red/green/blue) with extremely high transmission of the respective color channel, thus simultaneously reducing stray light and reflections to an unprecedented level
• Balanced RGB design allows subframes to be taken with the same exposure time – extremely important for automated imaging tasks
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• MicroGuide micrometric crosshair eyepiece incl. Log-Pot Illuminator and Batteries
• f = 12,5 mm, diversable usage
• The only micrometric crosshair guiding eyepiece on the market, still being produced with the original GenuineOrtho lens set

• ultra hard 2"nose piece, with Baader proprietory Safety Kerfs (introduced with our Morpheus and Hyperion Zoom Mark IV eyepieces: the numerous shallow kerfs give additional grip and security from inadvertent slipping, without the annoying problems sometimes caused by traditional deep undercuts)
• 32 mm total length, 27 mm usable length (after threading)
• Focus side 2" (50.8mm) male thread (SCT thread) – incl. female M48 filter thread for cell mounted 2" filters
• Telescope side 2" outer diameter – also including 48mm filter thread for cell mounted 2" filters
• 47 mm inner diameter with flat black anti-reflex coating
• for numerous applications, such as mounting the Baader 6x6 T-adapter (T-2 component #17) onto 2" focusers. For improving the 2" nose piece of all Baader 2" star diagonals a.s.f.

• Baader Wide-T-Ring to connect Leica, Sigma, Panasonic-L cameras on the Astro T-2 system
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Leica, Sigma, Panasonic L-Mount
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• suitable for Paramount MX mounts
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
• Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition

• Connection ring M54/M53 for Kowa TSN 770/880 Spotting Scopes
• enables connection of the Baader Hyperion Universal Zoom Mark IV to KOWA Spotting Scopes with M54 male thread
• Spotting-Scope-sided with M54 female thread
• Eyepiece-sided with M53 female thread

• M 36.4 is standard of Vixen telescopes
• Telescope side external thread 36.4mm
• Focuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...)
• Optical path length = 0.5 mm

• to connect Refractors with M93x1 inner threads
• only suitable for BDS-RT Diamond Steeltrack® for Refractors