BAADER APO 95/580 CaF2 Travel Companion with Feather Touch Focuser
- Baader Travel Companion - a genuine 95 mm Fluorite Apochromat in a compact mechanical design - the perfect „Travel Companion“. Made in Germany
- Weight 3.3 kg, backfocus 150mm incl. 2.5" Feather Touch Focuser FTF2535 from Starlight Instruments
- 580 mm focal length
Feather Touch Focuser FTF2535 for Baader APO 95 inkl. M68 and M93 Adapter
- Retrofit set Feather Touch Focuser FTF2535 Focuser for already purchased BAADER APO 95/580 CaF2 Travel Companion (#2300095 , € 4495,- )
- can be used instead of the pre-installed 2" BDS-RT Diamond Steeltrack® Focuser for Refractor-telescopes, 80mm focus-travel (#2957210 , € 359,- )
- Set includes
- 2,5" Diamond Dual Speed Feather Touch focuser from Starlight Instruments with 3,5" Draw tube travel and 1:10 reduction
- M68 adapter on camera side
- M95 adapter telescope side
- The Feather Touch FTF2535 focuser ends with an M68 female thread to which a flattener or an M68 clicklock can be connected.
- The backfocus is almost the same as the Baader 2" RT Diamond Steeltrack focuser
New BAADER Tilter
The Tilter Family grows...
An Overview of the Baader Tilter Family 25. September 2024 - Tilters are an indispensable tool for compensating the tilt of the camera image plane. They have easily accessible adjustment screws on the outer edge and have a short optical length. Read more
T-2 Tilter (0 - 1° image correction)
- T-2 tilter for an optimally aligned camera without tilt
- Compatible with the entire Baader T-2 system
- 0-1° tilt – allows a shift of up to 1° to compensate for misalignments in the image field
- 9.50 - 10.25 mm optical length
M48-Tilter (0 - 1° image correction)
- M48 tilter for an optimally aligned camera without tilt
- Compatible with the entire Baader M48 system
- 0-1° tilt – allows a shift of up to 1° to compensate for misalignments in the image field
- 9.50 - 10.25 mm optical length
M54-Tilter (0 - 1° image correction)
- M54 tilter for an optimally aligned camera without tilt
- Compatible with the entire Baader M54 system
- 0-1° tilt – allows a shift of up to 1° to compensate for misalignments in the image field
- 9.50 - 10.25 mm optical length
Accessories for spectroscopy
Spectroscopy Barlow
- Designed for DADOS Slit – Spectrograph (#2458550 , € 2360,- ) and BACHES Echelle-Spectrograph (#2458600 , € 9485,- ) , to avoid light loss at telescopes faster than f/10
- Perfect for telescopes with f/ratios up to approximately f/6.8 (e.g. PlaneWave CDK17, CDK 20)
- Easy and sturdy installation via SC thread
Accessories for BDS Steeltrack® & Steeldrive II
Adapter S58 to M54a – for all BDS Diamond Steeltrack
- BDS-Adapter with M54 outer thread to connect M48 parts
- Replaces the standard clamp, is installed with the S58 dovetail ring
- Suitable for all Baader Diamond Steeltrack® (BDS) focusers
Steeldrive II 3D-printed belt cover
- 3D-printed belt cover to protect the drive mechanism of the Steeldrive II Motor Unit (#2957265 , € 275,- )
- 3D printing technology enables the precise and accurate production of this cover, which is precisely adapted to the specific dimensions and requirements of the Steeldrive II.
- Contributes to the longevity of the drive by minimizing wear and potential damage to the belt and protecting it from influences such as dust and moisture
