Baader FCCT (Filter Changer Camera Tilter) for RASA 8" and QHY Cameras

Baader Tilter-System

The UFC-Tilter (0 - 1° image correction) – Optical height: ca. 10 mm (#2459146 , € 276,- ) , as well as the M68-Tilter (0 - 1° image correction) (#2458170 , € 255,- ) are mechanical image position correctors for Baader UFC or M68 adaptation systems, which, when assembled, allow the image corners of a CMOS/CCD camera on the telescope to be adjusted very sensitively from the side without having to remove the camera.

Exclusively for the RASA 8 and QHY cameras, we have developed the Baader FCCT, a filter holder with camera tiliting mechanism for the largest possible usable image field, sharp image corners and lightning-fast fine corrections. The Baader FCCT (Filter Changer Camera Tilter) with its extensive range of accessories enables both quick exchange of filters and easy correction of image tilt – without having to remove the camera from the RASA 8". Adjustment can be done conveniently from the side.

3D-printed filter sliders are available for the FCCT, which exclusively accommodate unmounted Baader filters with diameters of 31 mm / 36 mm and 2" (without cell). We offer selected 2" filters especially for the FCCT in an unmounted version.

Overview Baader Camera-Tilter and accessories for Baader FCCT

Expansion Kit FCCT I to FCCT II for QHY 268 / 294

• • Set consisting of telescope-sided extra-short RASA 8 adapter, three additional screws as well as camera-sided adapter plate for Ø 90 mm QHY cameras (e.g. QHY 268 / 294), which is screwed onto the standard FCCT QHY flange for Ø 77 mm QHY cameras
  • Allows to convert an existing FCCT 1 for RASA 8" – suitable for Ø 77mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,- ) in einen FCCT 2 for RASA 8" – suitable for Ø 90mm QHY-Cameras (e.g. QHY 268M / 294 / 533) (#2459071 , € 345,- ) if you purchase a new/additional camera

31 mm filter holder for Baader FCCT (3D-printed)

• 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
• Fitting for FCCT 1 for RASA 8" – suitable for Ø 77mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,- ) and FCCT 2 for RASA 8" – suitable for Ø 90mm QHY-Cameras (e.g. QHY 268M / 294 / 533) (#2459071 , € 345,- )
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• Also available as set containing of four 31 mm filter holders: FCCT Filter Holder Set: 4x 31mm – 3D-printed (#2459097 , € 129,- )

36 mm filter holder for Baader FCCT (3D-printed)

• 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
• Fitting for FCCT 1 for RASA 8" – suitable for Ø 77mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,- ) uad FCCT 2 for RASA 8" – suitable for Ø 90mm QHY-Cameras (e.g. QHY 268M / 294 / 533) (#2459071 , € 345,- )
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• Also available as set containing of four 36 mm filter holders: FCCT Filter Holder Set: 4x 36mm – 3D-printed (#2459098 , € 134,- )

2" filter holder for Baader FCCT (3D-printed)

• 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
• Fitting for FCCT 1 for RASA 8" – suitable for Ø 77mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,- ) and FCCT 2 for RASA 8" – suitable for Ø 90mm QHY-Cameras (e.g. QHY 268M / 294 / 533) (#2459071 , € 345,- )
• We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• Also available as set containing of four 2" filter holders: FCCT Filter Holder Set: 4x 36mm – 3D-printed (#2459098 , € 134,- )

Baader SunDancer II Telecentric System TZ-3S

• Achromatic 3x telecentric system
• Four-lens optical design, BBAR (Broad-Band Anti-Reflection) coating
• Anti-reflective thread and blackened lens edges against reflections and for maximum contrast
• Image circle 35mm in 65 mm distance to T-2 threaded base
• 1¼" and 2" nosepiece with 1¼" filter thread, T-2 thread on camera side
• The optical design places the telescope's focal point 28 mm behind the end of the 1¼" nosepiece

Baader UFC Seal, 3D-printed

• • 3D-printed UFC seal to close UFC systems without inserted filter slides
  • Suitable for all UFC systems - closes the opening for the filter sliding of the UFC against dust and light
  • Does NOT vignette the optical path when inserted
  • STL files for free download are available under TAB Downloads. You only need to login with your customer account or register on our website.
    Please note:  The download file is licensed under the Creative Commons License CC BY-NC-SA 4.0. You may pass on the file under Attribution © Baader Planetarium GmbH as well as linking the license and indicating any changes. The file may not be used for commercial purposes. If the file is changed, it must be redistributed under the same license.

Baader UFC Dark-Slider, 3D-printed

• • Suitable for all UFC systems
  • Closes the aperture of UFC and telescopes at the same time to create darks with CMOS Cameras
  • Vignettes the optical path 100% when inserted
  • STL files for free download are available under TAB Downloads. You only need to login with your customer account or register on our website.
    Please note:  The download file is licensed under the Creative Commons License CC BY-NC-SA 4.0. You may pass on the file under Attribution © Baader Planetarium GmbH as well as linking the license and indicating any changes. The file may not be used for commercial purposes. If the file is changed, it must be redistributed under the same license.
    

1 kg Leveling Weight, 75 x 30 mm

• 1kg Leveling Weight made of V2A stainless steel
• Axis diameter 16mm
• Diameter 75 mm x 30 mm
• Suitable for Baader Shafts for leveling counterweight M14, Ø 16 (various versions available) (150mm #2451554, 300mm #2451553)

Mounting block for leveling counterweight bar M14 for PkaneWave Instruments CDKs

• • Mounting Block for counterweight-bar M14, Ø 16mm for use on CDKs von Planewave Instruments
  • Counterweight bar ( Shafts for leveling counterweight M14, Ø 16 (various versions available) , can be screwed in via the M14 thread
  • Incl. scews 2x 1/4"- 20G UNC, 30mm long
  • Hole distance: 38,1mm
  • Weight: 110g

Leveling Weight Set for Planewave OTA

• Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis
• Mounts directly to the standard screw mount of all Planewave's common telescopes via the straight mounting block.
• Weights can be mounted in horizontal position at the rear of the OTA both "top" and "bottom". This makes it possible to balance the telescope in the vertical position as well.
• The Planewave Leveling-Set consists of
  • Balancing Weight 1kg, Ø75 x 30mm – for Ø16mm Balancing Shaft (#2951390 , € 101,- )
  • Balancing Weight 2.5 kg, Ø75 x 75mm – for Ø16mm Balancing Shaft (#2951402 , € 143,- )
  • 150 mm Shafts for leveling counterweight M14, Ø 16 (various versions available)
  • Mounting Block for M14 Balancing Shaft, straight – for PlaneWave CDKs (#2451549 , € 48,- )

2" BDS Steeltrack® M68i Adapter