UFC-Tilter (0 - 1° image correction) – Optical height: ca. 10 mm

The UFC Tilter has the same connections like all ouf our UFC extensions. So it can be placed between two extensions or between the UFC Base and an extensions or replace an extension and be placed between the UFC base and a telescope adapter.

We wouldn't recommend using the tilter between the camera and filterwheel, as keeping the shortest distance between sensor and filter is important. Normally, we would position the tilter between telescope and filterwheel. In case you still want to adapt your way, we would choose the M68 tilter (# 2458170) instead of the UFC-tilter with its much harder to adapt S70 dovetail. The M68 to T-2 Conversion Ring (# 2458233) would be needed for the female M68 thread on the tilter. The male thread side will require the M68 Conversion Ring (# 2458195) in combination with a second M68 to T-2 Conversion Ring (# 2458233). You can rotate the camera in relation to the filterwheel using the tilter. Please check your backfocus requirements, as this setup will use over 33 mm of backfocus, which is significant.

You need a 2 mm metric hex-head wrench. It would be preferable to not purchase an L-shaped hex key, but a screwdriver type with extended length so that the handle of the screw driver is outside of the Schmidt corrector plate.

What you see in the image is not a thread unfortunately, but an anti-reflection groove. Maybe the M68 Tilter serves your purposes better, because this indeed features a M68 female thread: https://www.baader-planetarium.com/en/accessories/adapters-imaging-accessories/m68-zeiss/baader-m68-tilter.html