New products November 2019

New member of the Baader UFC Systems: Baader UFC S70 / RASA 8" Adapter (optical height: 1,4 mm)

  • Baader UFC S70 RASA 8" telescope adapter to use cameras with 13mm back focus and T-2/M-48 or M54 female thread like the ATIK Horizon on the RASA 8".
  • Telescope-sided with RASA 8" thread (M87)
  • Camera-sided with S70 dovetail
  • Can be adapted via the S70 dovetail to the  Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110, € 50,-) as well as to UFC extensions. The UFC adapter is screwed directly onto the RASA 8 thread.

 

Baader UFC Basis (Filterkammer), teleskopseitig mit S70 Schwalbenschwanzfassung - deutsche Beschriftung<br /> Baader UFC Base (Filter Chamber) with receptor for S70 dovetail - German descriptionOn our overview website about the Baader UFC system we have published some blog posts to better understand the system. They explain the system vividly

Baader V-200 dovetail, L=200mm for Vixen / Celestron / Sky Watcher Mounts

  • V-200 dovetail with centrally milled slots
  • Sutiable for Vixen, Celestron, Skywatcher mounts
  • Base width 44mm
  • Black Anodized, Length: 200mm

Baader Z (AP)-Dovetail Clamp 200mm length

  • Z-dovetail 200mm for Zeiss / Astro-Physics
  • With mounting standard for Astrophysics 900* (*additional Astro-Physics adapter #1401155 required) / 600/400 / Mach 1 Mounts
  • With two pressure-clamps (old designs)
  • Not compatible with Vixen

 

Baader Tripod Adapter Flange for CGX / CGX-L


Baader Steel Leveling flange for PlaneWave L-500/600 Mount, Height 15 cm

  • Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
  • Suitable as a pillar adapter flange to Baader Modal Steel Pillar for big mounts(#2451220, € 2250,-)
  • Consisting of two solid Steel, separated by six steel bars
  • Top plate precision milled flat and threaded to fit the base plate.
  • Overall height: 150 mm

Baader Steel Leveling flange for PlaneWave L-500/600 Mount Height 10 cm

  • Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
  • suitable as a pillar adapter flange to the Baader Modal Steel Pillar for big mounts(#2451220, € 2250,-)
  • Consisting of two solid Steel, separated by six steel bars
  • Top plate precision milled flat and threaded to fit the base plate.
  • Overall height: 100 mm

Further accessories for Steeldrive II

SteSteeldrive II Controller Holder with Steeldrive II Controller #2957260, mounted on 3" dovetail – mounted on flgw equipment: Baader Apo 95/560 Travel Companion #2300095 + BDS-RT Steeltrack 80mm #2957210 + Steeldrive II motor #2957265 + 2" ClickLock clamp S58 #2956258 + Baader Flip Mirror II #2458055 with Hyperion eyepiece 21mm #2454621 + UFC-System +CAMQ QHY 174M Camera #1931052eldrive II Controller Holder for 3" Dovetail

  • Holder to attach the Steeldrive II Controller to a 3" Dovetail
  • Suitable for all 3" (Losmandy standard) dovetail clamps
  • The controller is inserted into the holder and can be quickly removed for manual operation.
  • The holder helps to lay cables cleanly for remote setup 

Temperature sensor for Steeldrive II, flat

  • Temperature sensor to compensate the drift automatically, if there are large temperature differences
  • Flat design, ideal to be attached to the optical tube
  • Temperature sensor with phone connector and 1m cable, also supports control of dew-shield-heating
  • Can be used with the Steeldrive II Motor Unit or Steeldrive II Controller 

 

 

 

Leave a Reply