T-2 Prism Diagonal with 32mm prism, incl. Focusing Eyepiece Holder and Nosepiece

Este prisma tiene un revestimiento reflectante de aluminio en las superficies de la hipotenusa y del borde del techo y un revestimiento múltiple en las superficies de vidrio-aire

The combination with our diagonal should work fine on your telescope. When you combine the prism with 2" eyepieces you will experience vignetting, the 32mm prism cannot illuminate the almost 50mm 2" field of view

Unfortunately we cannot say for sure. Please aks TS, the know their Guidescope and also our products

When you (or anyone else) removed the previous 1 1/4" eyepiece clamp mounted on top of the prism housing, most likely at that occasion the extension adapter from the female 36.4 ("Vixen") thread onto the male T-2 thread inadvertedly got unthreaded as well. So either you would find that ring at the bottom of the eyepiece clamp that was attached onto the prism housing before, or someone else had removed a previous clamp and did not notice that this "thread-adapter" got removed as well. You might contact your dealer - or buy that ring separately: https://www.baader-planetarium.com/en/baader-adapter-m36.4--t-2-(t-2-part-03).html

After hearing some customer feedback and rechecking, we can now confirm that the eyepiece holder does indeed have a stop that prevents prism contact with a 1.25” barrel after all. We're sorry about the confusion

There is no internal stop in the prism - but you can use one of our stop rings https://www.baader-planetarium.com/en/baader-fr-4-focusing-ring-collar-1%C2%BC%22-(t-2-part-30).html