Guidescope Rings (1 pair) – Size IV, 140-185mm

• Massive, solid, turned aluminium rings
• Width 28 mm
• Support surface with photo-threaded connection ¼ "and additionally 2 through-holes 5 mm diameter.
• 6 adjusting screws (M10) with 10mm Ø, ball bearing surface made of V2A steel, covered with a hard rubber sheath (i.e. the screw pressure surface does not rotate during the adjustment of the telescope!).

The guiding telescope is held in place absolutely solid, non-slip and will not be scratched! A further four milled planar surfaces with a photo-threaded hole are installed on the outer diameter in order to be able to attach additional accessories to the rings on the outside or to connect several rings together!