The savety groove can cause a tilt - depends on the clamp. The nose piece with kerfs is without this trouble.
I would like to know which product is suitable as same as a nosepiece of 2" Herschel prism #2956500?
It may be that there is a little bit of the anodized coating too thick inside of one of the threads - please take a look at the thread; if it is blocked somewhere, just take a knife and go along the thread once to clean it.
If you want to equip any 2" star diagonal with a ClickLock, you can always use
Baader 2" ClickLock 37 mm extension #2956237
Baader 2" ClickLock 47 mm extension #2956247
If you want to replace the nosepiece of a star diagonal with this nosepiece, it depends on the star diagonal. If you can remove the original nosepiece and if you can then access a female SC-thread (2" 24 GZ 60°), then you can replace one nosepiece with another - although this shouldn't make too much of a difference?
If you can remove the clamp of the star diagonal and can then see a male 2" SC thread, you can use the Baader 2" ClickLock SC/HD (2") clamp (C5" - C9¼") #2956220 to replace the original clamp.
Depending on the depth of the thread of your star diagonal, it may be that you need an additional spacer, otherwise a coupling ring may rotate, although the threads fit. Unfortunately, we do not have Meade accessories here to try it out.
- Related Articles
|Net weight (kg)||0.049|
|T-2 Part #||19|
|Inner Diameter / Clear Aperture (mm)||46|
|Outer Diameter||50,8 (2")|
|Inner Connection (lens sided)||Thread, M48|
|Outer Connection (lens sided)||Barrel, 2" (50,8mm)|
|Inner Connection (eyepiece/-camera-sided)||Thread, M48|
|Outer Connection (eyepiece/-camera-sided)||Thread, 2" (50,8mm)|
|Adaptable to||every female 2" SC-thread;6x6 T-Adapter|
|Compatible Brands||UNC, Baader Planetarium, Celestron|
|Type of Adapter||Barrel, Filter holder|