For adapting any cell mounted Baader 2 inch Filter onto a camera lens with 52mm front filter thread you will need:
#2408166 Baader DSLR 2" Filter-Holder M48 / SP54: https://www.baader-planetarium.com/en/baader-dslr-2%22-filter-holder-m48sp54.html
#2958052 Baader Lens-Adapter-Ring SP54 / M52: https://www.baader-planetarium.com/en/baader-hyperion-dt-ring-sp54m52-for-dtadapter-iiandiii-and-hyperion-eyepieces.html
Based on the SP54 thread, we offer many more adapters for various camera threads, our so-called Hyperion DT-rings. https://www.baader-planetarium.com/en/catalogsearch/result/?q=sp54
Both thread sizes come with our proprietary pitch - which is not the same for the female and male threads.
This is our own proprietary "emergency solution" for uniting a world were manufacturers all over the world copy from each other - to the point that there are almost a dozen different pitches in use for male and female threads. Traditionally US-companies used to do a UNF-based pitch and the rest of the world went for metric threads - but these do vary from 0.5 to 0.75.
For this reason it does not make sense to publish our non standard pitch because our pitch is made to cope with all existing metric and US-pitch standards - and as said - our solution has evolved from sheer necessity. It is a mixture of a queer pitch and under-/over-dimensioning . We will not want to declare this as a standard and get bashed up for it. It works for us and is a result of 20 years adaptation to fit our filters onto all crazy threads we have seen. And inspite of this - every now and then there comes another "dragonboat-eyepiece" were even our filters may not fit...
Baader UBVRI Filters - Specifications
Baader 4 mm thick UBVRI filters feature a proprietory design that strictly adheres to the classic Johnson/Bessel transmission specification. Unlike the classic construction that regularly has a thickness of 5mm or more, the Baader-filters are made of dielectric layers as well as absorption glasses. This allows for a smaller filter thickness of 4 mm. The original stack of pure colored glass had a thickness of 5 or 6 mm and would be too thick and too heavy for modern filter wheels.
In the old days UBVIR-filters were used for photodetectors and no one would care if the huge stack of cemented absorption glasses would cause havoc in terms of inherent internal reflections. Our method of combining dielectric coatings with a combination of short pass and long pass filters does provide for perfect off-band blocking into the far ends of the spectrum. This steep off-band-blocking would not be possible with pure dielectric layers over such a large transmission range.
|Technical Data not yet specified||Please choose product variant from dropdown above to see technical data of your chosen product|
You may also be interested in the following product(s)
€ 195.00 Price excl. German VAT tax (19%): € 163.87
€ 425.00 Price excl. German VAT tax (19%): € 357.14
€ 210.00 Price excl. German VAT tax (19%): € 176.47
€ 289.00 Price excl. German VAT tax (19%): € 242.86
As low as: € 9.50
As low as: € 305.00