Planewave
As official EU distributor, we are pleased to present the PlaneWave product range to you on a brandnew website:
The combination of PlaneWave telescopes as well as Baader domes, accessories and service leads to truly turnkey observatories.
There are no products matching the selection.
Important Care Tips for astronomical instruments
Please, observe the following guidelines to protect your telescope/mount and avoid damage or even loss of warranty.
Most Recent Product Questions
-
Rated: 0
8/16/2022 9:32 PM
Baader1¼" Amici-erecting-prism 45° with 24mm free aperture
Are caps provided with this prism ?
Answer rated: 0Yes there are dust caps on each sideAnswer by: Baader Web Team (Admin) on Aug 17, 2022 8:23:00 AMRated: 0
8/16/2022 3:08 PM
Bundle: Hyperion Universal Zoom Mark IV with Hyperion-Barlow 2.25x (8-24mm / 3.6-10.7mm)
Hello, I already have one of first version of the Hyperion zoom (there's only written Hyperion 8-24mm Clickstop-Zoom (Phantom Group Coated)) and I want to ask you: can I use it in pair with a Mark IV or III with a binoviewer..? Or should I avoid because of different size of the barrel...or different size of exit pupils ? Thank you very much for your answer and attention. Saluti
Answer rated: 0There is no difference in exit pupil or barrel size or something else that would avoid using the "old" Hyperion Zoom in bincoular viewersAnswer by: Baader Web Team (Admin) on Aug 16, 2022 4:11:00 PMRated: 0
8/15/2022 4:56 PM
Fluorite Flatfield Converter (FFC) / 3x-8x
Can this FFC be used with a SCT such as a Celestron C6 or C8 for imaging in at T2 imaging train?
Answer rated: 2Yes this will work
Answer by: Baader Web Team (Admin) on Aug 16, 2022 8:39:00 AMRated: 0
8/14/2022 4:44 AM
OPFA - Eyepiece Projection adapter ( I - VII )
Which Eyepiece Projection Adapters are compatible with Celestron Schmidt Cassegrain Telesopes.
Answer rated: 1OPFA-3 for Celestron 2" SC-Thread #2458143 can be attached directly onto the 2" SC-thread on the back of all Celestron Schmidt-Cassegrains.
OPFA-2 for 2" eyepiece clamps #2458142 fit's into all 2" eyepiece clamps and is the probably the most versatile option.
OPFA-1 for 1 ¼" eyepiece clamps #2458141 fits into 1.25" eyepiece clamps.
If possible, we'd recommend OPFA-2 (easier handling, sturdier than a 1.25" eyepiece clamp) or OPFA-3 (the sturdiest version, holds even heavy cameras safe, but has to be screwed onto the telescope). OPFA-1 and OPFA-2 should only be used with good eyepiece clamps which have a sturdy clamping ring instead of only one simple clamping screw pressing onto the eyepiece/OPFA.Answer by: Baader Web Team (Admin) on Aug 15, 2022 1:20:00 PMRated: 1
8/11/2022 3:34 PM
Baader SC / HD Ultra Short T-Adaptor, 9mm optical length
The 2", 24 turns-per-inch thread does not appear to be a standard thread in any of the UNF, UNC or Whitworth lists. All threads have dimensional tolerances (permitted dimensional deviations). The standards, such as ISO 965 for metric threads or ASME/ANSI B1.1 for Unified National threads, specify these. How are the permitted dimensional deviations defined for this product please? My reason for asking is that I want to be very sure that £2000 worth of camera equipment held in place by this product will not fall off. The consequences could be serious.
Answer rated: 1We do cut this thread according to the Celestron directives which are not to be published. We are authorized Celestron Distributor since 45 years and please be restassured that we know how to cut that 2" thread - as long as it will be fitted onto a Celestron-OTA.Answer by: Baader Web Team (Admin) on Aug 12, 2022 12:44:00 PMAnswer rated: 0That’s great, thank you. My adaptor arrived this morning and I have attached it to the telescope. It works just fine, does not “jiggle” or “wiggle” and I applied as much force as I dared to try to pull it off. It didn’t even almost pull off.
I am pleased to hear that you and Celestron have shared a detailed specification. I don’t need to know what’s in it. The fact that there is one is enough to reassure me.
Thank you very much.Answer by: Dr. Jane Clark on Aug 16, 2022 9:39:00 AM