Special Solar Filters

Grid List

Set Ascending Direction

7 Item(s)

  1.   Baader Double Polarizing Filter
    From: € 75.02 Price excl. German VAT tax (19%): € 63.04
    • Baader Double Polarizing Filter - Ideal for solar and planetary observations.
    • For solar work in conjunction with Baader AstroSolar Safety Film or Baader Herschel Wedge Prism (never use any eyepiece filter for solar observation without objective front filter).
    • Rotatable filter cell allows continous adjustment of brightness for comfortable viewing
    • Enhances contrast during planetary observation.
    • Non-ageing sealed coating edges.
    Learn More
  2.   Baader Single Polarizing Filter

    Baader Single Polarizing Filter

    From: € 40.00 Price excl. German VAT tax (19%): € 33.61
    • Baader Polarizing Filter - Ideal filter for solar and lunar observations and contrast enhancement in planetary observations.
    • Fits 1¼ or 2" eyepieces/threads and is screwed before the eyepiece
    • Adjustable brightness when used with a Baader Hershel Wedge
    • Important Note: Polarizer will need additional filtering (eg Herschel Prism or AstroSolar Safety Film) before the eyepiece of the telescope for solar observations.
    Learn More
  3.   Baader K-Line Filter 1¼" (double stacked)

    Baader K-Line Filter 1¼" (double stacked)

    # 2458355

    € 315.00 Price excl. German VAT tax (19%): € 264.71
    • Warning: for photographic imaging only
    • for solar work use only with 3.8 AstroSolar 200x290mm Photo Film (included)
    • never use any eyepiece filter for solar observation without objective front filter
    • non-ageing sealed coating edges
    • Never look into the sun with the K-Line filter without an additional OD-reduction filter. For more information read the PDF Notes about the stacked 1¼" K-Line Filter
    Learn More
  4.   Baader Solar Continuum Filter 1¼" (double stacked)

    # 2458392

    € 170.00 Price excl. German VAT tax (19%): € 142.86
    • 1¼" Double Stacked Baader Solar Continuum Filter. 8nm / CWL 540nm.
    • Includes 1x AstroSolar® Photo Film OD 3.8 20x29 cm. The filter includes two Baader Solar Continuum Filters in a single filter cell which have been stacked for even higher contrast.
    • Enhances the contrast and reduces the effect of atmospheric turbulence.
    • This filter must be used in conjunction with a Baader Herschel Wedge or Baader AstroSolar® Safety Film 5.0 (not included) for solar observations otherwise equipment damage may occur. The included Baader AstroSolar® Photo Film 3.8 must not be used for visual observation but only for solar photography (e.g. lucky imaging).
    Learn More
  5.   Baader Solar Continuum Filter (540nm)

    Baader Solar Continuum Filter (540nm)

    € 175.00 Price excl. German VAT tax (19%): € 147.06
    • Baader Solar Continuum Filter, 10nm / CWL 540nm
    • A must for owners of achromatic refractors. This filter cuts the spectral range transmitting a specific spectral range around 540nm, completely cutting out blue and red wavelengths in an area of the lens system that where the optics are at their sharpest.
    • Enhances contrast and reduces the effect of atmospheric turbulence.
    • This filter must be used in conjunction with a Baader Herschel Wedge or Baader AstroSolar Safety Film for solar observations otherwise eye or equipment damage may occur.
    • Planeoptically polished, non-ageing sealed coating edges.
    Learn More
  6.   Baader D-ERF Energy Rejection Filter (75 - 180mm)

    Baader D-ERF Energy Rejection Filter (75 - 180mm)

    From: € 295.00 Price excl. German VAT tax (19%): € 247.90
    • D-ERF (Dielectric Energy Reflection Filter) in different sizes
    • Pre-filter to reduce heat during H-alpha observation with SolarSpectrum Filters
    • Plane parrallel plate (without filter cell) with IR-Cut dielectric coating
    • non-ageing sealed coating edges
    • Half-Band-Width (HBW): 80 mm – see also graph
    • Filter WITHOUT cell – 3D-printed filter cells - customized for your telescope, can be ordered in addition (not available as standalone product)

    Important Note: Please note our information on the availability of 3D-printed or CNC-turned cell mounts for front side D-ERF filters as custom-made products.

    Learn More
  7.   Baader Neutral Density Filter (ND 0,6 / 0,9 / 1,8 / 3,0)

    Baader Neutral Density Filter (ND 0,6 / 0,9 / 1,8 / 3,0)

    From: € 45.00 Price excl. German VAT tax (19%): € 37.82
    • Baader Neutral Density Filters ND 0.6 / 0.9 / 1.8 / 3.0.
    • For perfect energy management during Lunar and Solar observation. Suitable for solar observing only as an additional filter!
    • If you need to reduce glare and want to use a filter ahead of the focal point (e.g. before a binocular), then the neutral density filters are just right.
    • Fine optical polish results in no loss of sharpness at high magnifications even with a filter position 20-30cm in front of the focal point.
    • Phantom Group coated. No ghosting, reflections or stray light.
    • Threaded both sides of the glass allows combination with other filters (e.g. Baader Colour Filters).
    Learn More

Grid List

Set Ascending Direction

7 Item(s)