Solarscope Projector
-
Sonnenbeobachtungs-Workshop mit Schülern, eine Station von sieben=SolarscopeBeginnen wir mit dem Negativen - der deutschen Übersetzung der beiliegenden Anleitung - die ist so schlecht ausgefallen, das könnte sogar Google Translate besser. Zum Glück sind die Abbildungen klar und verständlich und somit schafft man das Zusammenstecken der Kartonteile auch mit Hilfe der Abbildungen alleine recht flott. Eine bessere Lösung zum Scharfstellen der Sonnenprojektion ist ein Vorschlag für die Zukunft dieses Produkts, die Klemmung mit Hilfe kleiner Rillen auf dem Abbildungsfernrohr fällt zu grob aus, in meinem Fall wäre die beste Schärfe zwischen zweier solcher Rillen gelegen. Das Abbild der Sonne ist 12cm groß und so entsprechend große Sonnenflecken vorhanden sind, kann man diese auch wunderbar erkennen.Astro Tafelberg
Most Recent Product Questions
-
Rated: 0
6/20/2022 9:02 AM
Baader Q-Barlow 2.25x / 1.3x
What is the focal length of the barlow or is the given magnification correct? I measured some photos and got different results.
Answer rated: 0The focal length is 45.5mm, the magnifications given are correct for the Baader Classic eyepieces and all other eyepieces where the field sop is 2mm inside of the 1.25" nose piece. The magnification factor of a Barlow lens depends on how far it is from the field stop of the eyepiece or the camera sensor. So if your camera is in the wrong distance, it will deliver a different magnification. We have now explained this more extensive in this FAQ.Answer by: Baader Web Team (Admin) on Jun 20, 2022 9:03:00 AMRated: 1
6/17/2022 6:39 AM
Baader Nose piece 1¼" / T-2 (T-2 part #14)
Does this show any internal reflections for daytime, Solar, and Lunar use?
Answer rated: 0The inside is black and with ripples against reflections, and we haven't seen reflections or had complaints about reflections.Answer by: Baader Web Team (Admin) on Jun 17, 2022 1:51:00 PMRated: 0
6/14/2022 10:53 AM
Baader 2" ClickLock eyepiece clamps (from T-2 to 4,1")
May I use the 2" barrel of Morpheus eyepieces using the 2" ckicklock adapter #2956242 on the T2 amici prism #2456130?
Morpheus 2" and 1,25" barrel have a length of 45mm and the clicklock adapter with thread 36,5mm, does this means the 1,25" barrel will hit the prism?
Regards
Answer rated: 0We have just tested this combination to be sure.
The 2"-barrel of the Morpheus eyepiece can be fully inserted without any interference.Answer by: Baader Web Team (Admin) on Jun 14, 2022 3:15:00 PMRated: -2
6/10/2022 5:15 PM
Adaptercombination 3,3" to M68
The 3.3" thread used in the Celestron scope is different than the one used on the Meade scope. I wonder how is it possible that this adapter fits both. Maybe you have different versions?
Answer rated: 0We have no idea why Meade changed their thread norm just a tiny bid when they copied Celestrons 3" thread. Celestron was first - but that had happened more than 40 years ago..
Also about 35 years ago we started to do accessories with that 3.3" size - and we saw that if we do create our own norm for the thread width - which is a tiny bit wider on the Celestron OTAs, then we could do one ring that will fit both telescope brands.
So we do produce 3.3" threaded rings with our own "in-house-standard" - and it works on both brands.Answer by: Baader Web Team (Admin) on Jun 14, 2022 9:39:00 AMRated: -2
6/10/2022 10:24 AM
VIP 2x modular barlow lens, visual and photographic
Mine is not really a question, but I would like to offer my feedback regarding the configuration I use all the time for visual work:
(1) 2-to-1.25 reducer
(2) 15mm spacer ring
(3) 2" nosepiece (# 2408150)
(4) Baader VIP element housing cell
(5) Baader M43a x 0.75 / T-2a Adapter (# 2458199).
In particular, (4) is mounted on (5), and (5) is screwed at the bottom of (3) via T2 connection.
Advantages of this configuration for visual use are:
(1) the change in focus position when the VIP is used or removed is minor. Also, adding spacers does not change the focus position much
(2) it is more solid, as the connection with the focuser is via 2"
(3) the barlow can be used with refractor diagonals in 2" without hitting the mirror or prism.
Thanks for making such a wonderful tool.
Answer rated: 0Thank you very much for your very nice feedback! If you have some photos of the equipment and astrophotos that you took with the equipment - and you would allow us to publish it in our product page blog together with your feedback - please send it to support@baader-planetarium.de
Answer by: Baader Web Team (Admin) on Jun 10, 2022 4:03:00 PM