- Home /
- Solar Observation /
- Safety Herschel Prism
- Stock Level1
-
- (1)
- Optical tube length (mm)1
-
- (1)
- Usage3
-
- (1)
- (1)
- (1)
- Solar Wavelenght1
-
- (1)
- Connections (eyepiece-/camera-sided)6
-
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- Connections (lens sided)7
-
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- Manufacturer1
-
- (1)
- Optical Design1
-
- (1)
Safety Herschel Prism
1 Item(s)
-
Baader 2" Cool-Ceramic Safety Herschel Prism (Visual / Photographic)
From: € 528.99 Price excl. German VAT tax (19%): € 444.53
1 Item(s)

AstroSolar.com: Everything for safe solar observation and photography in Whitelight and H-alpha
Please visit our AstroSolar-Website for extensive information on the Differences of our AstroSolar Films, for Safety Instructions and Downloads, Customer Reviews, Image Galleries, News and much more.
-
Solar Eclipse of June 10, 2020 with Baader Herschel PrismI just received the photographic model one day before the Solar Eclipse of June 10, 2020. So, it was my firsts attempt in Solar observing and imaging. I find the Hershel helioscope easy to use thanks to the projection screen and the pre-mounted filters permits quick operational setup. After observing with my zoom Baader 8-24-3,5 mm, I try some one-shot photos with my Canon EOS R. Here’s one after quick Lightroom processing. Alain, Malmedy - BelgiqueAlain
-
Sonnengranulen mit dem Baader HerschelprismaDie Aufnahme wurde von einem 1 Meter AZ RC Teleskop von ASA nahe Bad Tölz am 26.2.2021 gemacht. Dazu wurde das Teleskop rund auf 320mm Off Axis abgeblendet. Es wurde das hervorragende Baader Herschelprisma in Verbindung mit einem Baader Solar Kontinum Filter und einem 1.5 ND Filter hergenommen. Das Herschelprisma wurde von mir modifiziert mit aktiver Kühlung: Lüfter und zusätzlich angebrachte Lüftungsöffnungen. Die erste Variante hatte noch einen Föhn dran! Der war mir aber viel zu laut hat aber Kühltechnisch einiges an Wärme weggebracht. Nur habe ich bemerkt das man diesen Power gar nicht unbedingt braucht und habe einen leisen Lüfter nun drin der allerdings viel weniger Druck aufbaut. Mit einer ASI 290mm Videokamera wurden 60 Sekunden lang bei einer Framerate von ca. 160 Bilder pro Sekunde in Full HD Auflösung aufgenommen und von diesen ca. 10.000 Einzelbildern wurde mit Stacking Programm AS3 die besten 1000 Einzelbilder (Lucky Imaging) gestäckt mit RegiStax geschärft und mit Photoshop nachbearbeitet. Achtung ich möchte drauf hinweisen, dass nicht alle Teleskope so konzipiert sind Sonne mit größer Öffnung ohne Schutzfilter zu machen. Das Sonnenlicht und die Energie darin kann leicht Teile des Teleskops zerstören gerade wenn es zum Fokuspunkt kommt da die Energiedichte hier extrem stark zunimmt. Deswegen klären Sie bitte unbedingt mit dem Händler ab, ob Sie solch einen Setup mit Ihrem Teleskop gefahrlos machen können oder ob hier zusätzliche Filter notwendig sind. Auch wichtig lassen Sie größte Sorgfalt walten denn bei größeren Öffnungen ist es gefährlich mit der Sonne zu arbeiten und schauen Sie niemals hier mit Ihrem Auge rein. Ein kurzer Blick bei solchen Öffnungen und der im Fokus extrem starken Energie kann Ihnen das Augenlicht kosten. Nachtrag: Am 25.4.2021 hatte ich First Light vom neuen 12“ APO von TEC. Gegen 14 Uhr ist diese Sonnenflecken Gruppe Bild entstanden. Dazu wurde das Herschel Prisma von Baader verwendet und mit einer ASI 290mm wurde ein Video von 60 Sekunden Dauer aufgenommen. Anschließend wurden die die besten Einzelbilder mit AS3 gestäckt mit RegiStax und Photoshop bearbeitet. Es handelt sich um eine der ersten Gruppen von Sonnenflecken des neuen Zyklus. Am 14.5.2021 war der Himmel wie auch die letzten Tage bewölkt aber plötzlich machte der Himmel für ca. 20 Minuten auf. Das gute Seeing in diesem kurzen Zeitfenster erlaube eine 2 fach Barlow Lens ein zu setzen die die Sonnengranulation in recht hoher Vergrößerung und vielen Details zeigt. Als Teleskop diente ein TEC 12" FL APO montiert auf einer ASA 500 Montierung. Mit einer ASI 290mm Video Kamera wurden mit dem Baader Herschel Prisma (welches von mir mit einer aktiven Luftkühlung umgebaut wurde) ein Video von 60 Sekunden Dauer gemacht. 150 der besten Einzelbilder wurden durch das Programm AS3 gestäckt und per RegiStax geschärft sowie final mit Photoshop bearbeitet.E. Enzmann
-
Makelllose Sonne mit dem Baader Cool Ceramic Herschelkeil und 4 Zoll APO TriplettUm mich für den kürzlich gestarteten 25. Zyklus vorzubereiten, habe ich mir den Baader Cool Ceramic Herschelkeil mit dem inkludierten 2 Zoll Solar Continuum und ND 3.0 Filter gekauft. Dieser soll dann in der hoffentlich bald aktiver werdenden Sonne zusammen mit meinem Skywatcher ESPRIT 100 und einer monochromen ZWO Asi Kamera Verwendung finden. Anbei ein kleines Mosaik aus 3 Teilen bestehend vom 9. Mai 2020, Mosaik weil ich eine kleine Barlow verwendet hatte. Die einzige Herausforderung war das in-Fokus kommen, - dazu musste ich die 11/4 Zoll "Nase" der Kamera abschrauben, um möglichst nahe ranzukommen, sonst wäre es sich nicht ausgegangen.Michael S.
-
Excellent for hard core solar observers & PhotoI use the photographic model for both visual and photography. I use it with a TV 85 APO refractor and a 152mm Officina Stellare APO triplet refractor.. I was concerned that my TV 85 APO wouldn't have enough in focus for photography. But with the removal of the Click lock and replacement with the Tmount adaptor and my Niikon DSLR it comes to focus with about 3/16" to spare on focuser travel. The other scope is no problem either. Optically this is the ultimate for white light photography. I also have BAADER Astro Solar Film filters that up to now have been my choice. But the Hershel Wedge gives even better results with fine detail and nice crisp images without flare or ghost images. The Solar Conitinuum filter is designed to work with achromats but even APOs will benefit. Larger magnification images hold together extremely well.. The real question is whether the big difference in cost between the Hershel Wedge and BAADER Astro Solar Film is giving the best bang for the buck? If you are only an occasional observer, not a photographer, it may not be worth it. But if you are a hard core solar fan than I recommend it highly. By the way also have a Ha solar scope and while that is fantastic....the two views are very different. If you don't know what I am talking about....read up on the differences and than you can decide if you want to get the wedge.Robert
-
Rated: 0
6/20/2022 9:02 AM Baader Q-Barlow 2.25x / 1.3x
What is the focal length of the barlow or is the given magnification correct? I measured some photos and got different results.Is Answered? Yes (1 answer)
Answer rated: 0The focal length is 45.5mm, the magnifications given are correct for the Baader Classic eyepieces and all other eyepieces where the field sop is 2mm inside of the 1.25" nose piece. The magnification factor of a Barlow lens depends on how far it is from the field stop of the eyepiece or the camera sensor. So if your camera is in the wrong distance, it will deliver a different magnification. We have now explained this more extensive in this FAQ.Answer by: Baader Web Team (Admin) on Jun 20, 2022 9:03:00 AMRated: 16/17/2022 6:39 AM Baader Nose piece 1¼" / T-2 (T-2 part #14)
Does this show any internal reflections for daytime, Solar, and Lunar use?Is Answered? Yes (1 answer)
Answer rated: 0The inside is black and with ripples against reflections, and we haven't seen reflections or had complaints about reflections.Answer by: Baader Web Team (Admin) on Jun 17, 2022 1:51:00 PMRated: 06/14/2022 10:53 AM Baader 2" ClickLock eyepiece clamps (from T-2 to 4,1")
May I use the 2" barrel of Morpheus eyepieces using the 2" ckicklock adapter #2956242 on the T2 amici prism #2456130?
Morpheus 2" and 1,25" barrel have a length of 45mm and the clicklock adapter with thread 36,5mm, does this means the 1,25" barrel will hit the prism?
RegardsIs Answered? Yes (1 answer)
Answer rated: 0We have just tested this combination to be sure.
The 2"-barrel of the Morpheus eyepiece can be fully inserted without any interference.Answer by: Baader Web Team (Admin) on Jun 14, 2022 3:15:00 PMRated: -26/10/2022 5:15 PM Adaptercombination 3,3" to M68
The 3.3" thread used in the Celestron scope is different than the one used on the Meade scope. I wonder how is it possible that this adapter fits both. Maybe you have different versions?Is Answered? Yes (1 answer)
Answer rated: 0We have no idea why Meade changed their thread norm just a tiny bid when they copied Celestrons 3" thread. Celestron was first - but that had happened more than 40 years ago..
Also about 35 years ago we started to do accessories with that 3.3" size - and we saw that if we do create our own norm for the thread width - which is a tiny bit wider on the Celestron OTAs, then we could do one ring that will fit both telescope brands.
So we do produce 3.3" threaded rings with our own "in-house-standard" - and it works on both brands.Answer by: Baader Web Team (Admin) on Jun 14, 2022 9:39:00 AMRated: -26/10/2022 10:24 AM VIP 2x modular barlow lens, visual and photographic
Mine is not really a question, but I would like to offer my feedback regarding the configuration I use all the time for visual work:
(1) 2-to-1.25 reducer
(2) 15mm spacer ring
(3) 2" nosepiece (# 2408150)
(4) Baader VIP element housing cell
(5) Baader M43a x 0.75 / T-2a Adapter (# 2458199).
In particular, (4) is mounted on (5), and (5) is screwed at the bottom of (3) via T2 connection.
Advantages of this configuration for visual use are:
(1) the change in focus position when the VIP is used or removed is minor. Also, adding spacers does not change the focus position much
(2) it is more solid, as the connection with the focuser is via 2"
(3) the barlow can be used with refractor diagonals in 2" without hitting the mirror or prism.
Thanks for making such a wonderful tool.Is Answered? Yes (1 answer)
Answer rated: 0Thank you very much for your very nice feedback! If you have some photos of the equipment and astrophotos that you took with the equipment - and you would allow us to publish it in our product page blog together with your feedback - please send it to support@baader-planetarium.de
Answer by: Baader Web Team (Admin) on Jun 10, 2022 4:03:00 PMBaader Planetarium GmbHOur company exists now for more than 50 years. In this time, more than 15.000 Baader Planetariums (the first patented product of our company) help all over the world to give students an understanding of astronomical correlations. In our own manufactory, more than 500 observatory domes have been produced and delivered turnkey-ready. Instruments and telescope accessories from "Baader" are known for their high qualities by many astronomers and universities. We consider it our duty and obligation, not only to sell telescopes, but an indivdually selected telescope system, that brings you a lifetime of joy.
Please note: Our logistics department is closed from June 28th to 30th for annual stock-taking. Processing/Delivery of orders (by order of arrival during this time) will start again on July 1st, 2022. We apologize for any inconvenience