- Home /
- Solar Observation /
- Safety Herschel Prism
- Stock Level1
-
- (1)
- Optical tube length (mm)1
-
- (1)
- Usage3
-
- (1)
- (1)
- (1)
- Solar Wavelenght1
-
- (1)
- Connections (eyepiece-/camera-sided)6
-
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- Connections (lens sided)7
-
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- Manufacturer1
-
- (1)
- Optical Design1
-
- (1)
Safety Herschel Prism
1 Item(s)
-
Baader 2" Cool-Ceramic Safety Herschel Prism (Visual / Photographic)
From: € 528.99 Price excl. German VAT tax (19%): € 444.53
1 Item(s)

AstroSolar.com: Everything for safe solar observation and photography in Whitelight and H-alpha
Please visit our AstroSolar-Website for extensive information on the Differences of our AstroSolar Films, for Safety Instructions and Downloads, Customer Reviews, Image Galleries, News and much more.
-
Solar Eclipse of June 10, 2020 with Baader Herschel PrismI just received the photographic model one day before the Solar Eclipse of June 10, 2020. So, it was my firsts attempt in Solar observing and imaging. I find the Hershel helioscope easy to use thanks to the projection screen and the pre-mounted filters permits quick operational setup. After observing with my zoom Baader 8-24-3,5 mm, I try some one-shot photos with my Canon EOS R. Here’s one after quick Lightroom processing. Alain, Malmedy - BelgiqueAlain
-
Sonnengranulen mit dem Baader HerschelprismaDie Aufnahme wurde von einem 1 Meter AZ RC Teleskop von ASA nahe Bad Tölz am 26.2.2021 gemacht. Dazu wurde das Teleskop rund auf 320mm Off Axis abgeblendet. Es wurde das hervorragende Baader Herschelprisma in Verbindung mit einem Baader Solar Kontinum Filter und einem 1.5 ND Filter hergenommen. Das Herschelprisma wurde von mir modifiziert mit aktiver Kühlung: Lüfter und zusätzlich angebrachte Lüftungsöffnungen. Die erste Variante hatte noch einen Föhn dran! Der war mir aber viel zu laut hat aber Kühltechnisch einiges an Wärme weggebracht. Nur habe ich bemerkt das man diesen Power gar nicht unbedingt braucht und habe einen leisen Lüfter nun drin der allerdings viel weniger Druck aufbaut. Mit einer ASI 290mm Videokamera wurden 60 Sekunden lang bei einer Framerate von ca. 160 Bilder pro Sekunde in Full HD Auflösung aufgenommen und von diesen ca. 10.000 Einzelbildern wurde mit Stacking Programm AS3 die besten 1000 Einzelbilder (Lucky Imaging) gestäckt mit RegiStax geschärft und mit Photoshop nachbearbeitet. Achtung ich möchte drauf hinweisen, dass nicht alle Teleskope so konzipiert sind Sonne mit größer Öffnung ohne Schutzfilter zu machen. Das Sonnenlicht und die Energie darin kann leicht Teile des Teleskops zerstören gerade wenn es zum Fokuspunkt kommt da die Energiedichte hier extrem stark zunimmt. Deswegen klären Sie bitte unbedingt mit dem Händler ab, ob Sie solch einen Setup mit Ihrem Teleskop gefahrlos machen können oder ob hier zusätzliche Filter notwendig sind. Auch wichtig lassen Sie größte Sorgfalt walten denn bei größeren Öffnungen ist es gefährlich mit der Sonne zu arbeiten und schauen Sie niemals hier mit Ihrem Auge rein. Ein kurzer Blick bei solchen Öffnungen und der im Fokus extrem starken Energie kann Ihnen das Augenlicht kosten. Nachtrag: Am 25.4.2021 hatte ich First Light vom neuen 12“ APO von TEC. Gegen 14 Uhr ist diese Sonnenflecken Gruppe Bild entstanden. Dazu wurde das Herschel Prisma von Baader verwendet und mit einer ASI 290mm wurde ein Video von 60 Sekunden Dauer aufgenommen. Anschließend wurden die die besten Einzelbilder mit AS3 gestäckt mit RegiStax und Photoshop bearbeitet. Es handelt sich um eine der ersten Gruppen von Sonnenflecken des neuen Zyklus. Am 14.5.2021 war der Himmel wie auch die letzten Tage bewölkt aber plötzlich machte der Himmel für ca. 20 Minuten auf. Das gute Seeing in diesem kurzen Zeitfenster erlaube eine 2 fach Barlow Lens ein zu setzen die die Sonnengranulation in recht hoher Vergrößerung und vielen Details zeigt. Als Teleskop diente ein TEC 12" FL APO montiert auf einer ASA 500 Montierung. Mit einer ASI 290mm Video Kamera wurden mit dem Baader Herschel Prisma (welches von mir mit einer aktiven Luftkühlung umgebaut wurde) ein Video von 60 Sekunden Dauer gemacht. 150 der besten Einzelbilder wurden durch das Programm AS3 gestäckt und per RegiStax geschärft sowie final mit Photoshop bearbeitet.E. Enzmann
-
Makelllose Sonne mit dem Baader Cool Ceramic Herschelkeil und 4 Zoll APO TriplettUm mich für den kürzlich gestarteten 25. Zyklus vorzubereiten, habe ich mir den Baader Cool Ceramic Herschelkeil mit dem inkludierten 2 Zoll Solar Continuum und ND 3.0 Filter gekauft. Dieser soll dann in der hoffentlich bald aktiver werdenden Sonne zusammen mit meinem Skywatcher ESPRIT 100 und einer monochromen ZWO Asi Kamera Verwendung finden. Anbei ein kleines Mosaik aus 3 Teilen bestehend vom 9. Mai 2020, Mosaik weil ich eine kleine Barlow verwendet hatte. Die einzige Herausforderung war das in-Fokus kommen, - dazu musste ich die 11/4 Zoll "Nase" der Kamera abschrauben, um möglichst nahe ranzukommen, sonst wäre es sich nicht ausgegangen.Michael S.
-
Excellent for hard core solar observers & PhotoI use the photographic model for both visual and photography. I use it with a TV 85 APO refractor and a 152mm Officina Stellare APO triplet refractor.. I was concerned that my TV 85 APO wouldn't have enough in focus for photography. But with the removal of the Click lock and replacement with the Tmount adaptor and my Niikon DSLR it comes to focus with about 3/16" to spare on focuser travel. The other scope is no problem either. Optically this is the ultimate for white light photography. I also have BAADER Astro Solar Film filters that up to now have been my choice. But the Hershel Wedge gives even better results with fine detail and nice crisp images without flare or ghost images. The Solar Conitinuum filter is designed to work with achromats but even APOs will benefit. Larger magnification images hold together extremely well.. The real question is whether the big difference in cost between the Hershel Wedge and BAADER Astro Solar Film is giving the best bang for the buck? If you are only an occasional observer, not a photographer, it may not be worth it. But if you are a hard core solar fan than I recommend it highly. By the way also have a Ha solar scope and while that is fantastic....the two views are very different. If you don't know what I am talking about....read up on the differences and than you can decide if you want to get the wedge.Robert
-
Rated: 0
8/16/2022 3:08 PM Bundle: Hyperion Universal Zoom Mark IV with Hyperion-Barlow 2.25x (8-24mm / 3.6-10.7mm)
Hello, I already have one of first version of the Hyperion zoom (there's only written Hyperion 8-24mm Clickstop-Zoom (Phantom Group Coated)) and I want to ask you: can I use it in pair with a Mark IV or III with a binoviewer..? Or should I avoid because of different size of the barrel...or different size of exit pupils ? Thank you very much for your answer and attention. SalutiIs Answered? Yes (1 answer)
Answer rated: 0There is no difference in exit pupil or barrel size or something else that would avoid using the "old" Hyperion Zoom in bincoular viewersAnswer by: Baader Web Team (Admin) on Aug 16, 2022 4:11:00 PMRated: 08/15/2022 4:56 PM Fluorite Flatfield Converter (FFC) / 3x-8x
Can this FFC be used with a SCT such as a Celestron C6 or C8 for imaging in at T2 imaging train?Is Answered? Yes (1 answer)
Answer rated: 0Yes this will work
Answer by: Baader Web Team (Admin) on Aug 16, 2022 8:39:00 AMRated: 08/14/2022 4:44 AM OPFA - Eyepiece Projection adapter ( I - VII )
Which Eyepiece Projection Adapters are compatible with Celestron Schmidt Cassegrain Telesopes.Is Answered? Yes (1 answer)
Answer rated: 0OPFA-3 for Celestron 2" SC-Thread #2458143 can be attached directly onto the 2" SC-thread on the back of all Celestron Schmidt-Cassegrains.
OPFA-2 for 2" eyepiece clamps #2458142 fit's into all 2" eyepiece clamps and is the probably the most versatile option.
OPFA-1 for 1 ¼" eyepiece clamps #2458141 fits into 1.25" eyepiece clamps.
If possible, we'd recommend OPFA-2 (easier handling, sturdier than a 1.25" eyepiece clamp) or OPFA-3 (the sturdiest version, holds even heavy cameras safe, but has to be screwed onto the telescope). OPFA-1 and OPFA-2 should only be used with good eyepiece clamps which have a sturdy clamping ring instead of only one simple clamping screw pressing onto the eyepiece/OPFA.Answer by: Baader Web Team (Admin) on Aug 15, 2022 1:20:00 PMRated: 18/11/2022 3:34 PM Baader SC / HD Ultra Short T-Adaptor, 9mm optical length
The 2", 24 turns-per-inch thread does not appear to be a standard thread in any of the UNF, UNC or Whitworth lists. All threads have dimensional tolerances (permitted dimensional deviations). The standards, such as ISO 965 for metric threads or ASME/ANSI B1.1 for Unified National threads, specify these. How are the permitted dimensional deviations defined for this product please? My reason for asking is that I want to be very sure that £2000 worth of camera equipment held in place by this product will not fall off. The consequences could be serious.Is Answered? Yes (2 answers)
Answer rated: 1We do cut this thread according to the Celestron directives which are not to be published. We are authorized Celestron Distributor since 45 years and please be restassured that we know how to cut that 2" thread - as long as it will be fitted onto a Celestron-OTA.Answer by: Baader Web Team (Admin) on Aug 12, 2022 12:44:00 PMAnswer rated: 0That’s great, thank you. My adaptor arrived this morning and I have attached it to the telescope. It works just fine, does not “jiggle” or “wiggle” and I applied as much force as I dared to try to pull it off. It didn’t even almost pull off.
I am pleased to hear that you and Celestron have shared a detailed specification. I don’t need to know what’s in it. The fact that there is one is enough to reassure me.
Thank you very much.Answer by: Dr. Jane Clark on Aug 16, 2022 9:39:00 AMRated: 18/11/2022 10:02 AM 2" BDS-SC Baader Diamond Steeltrack® Focuser
Hello, I'm looking for a taller focus travel. I have a LX200 12' and I'm asking myself if 30mm focus travel will be enough. In fact, I've seen the RT version and I'm asking myself if the RT focuser won't fit onto my LX200.
I have an other question, which adapter do you recommend to be used between my LX and that focuser ?Is Answered? Yes (1 answer)
Answer rated: 0Please check the dimensions before to avoid a possible collition. The inner Tube of the RT Model has a diameter of 63mm, please see:
https://www.baader-planetarium.com/en/downloads/dl/file/id/28/product/2858/bds_rt_dimensions_technical_drawing.pdf
Usually you mount the SC modell and focus with the original focus knob to a range that you can focus all your accessories furthermore with the Diamond Steeltrack SC. Please hold in mind that Meade sometimes uses sligtly different tolerances for the thread, We had some trouble with it in
the past. Which adapter you need for your telescope depends the thread you have. For the Steel Tracks you can find all dimensions under the Link
<Downloads>Answer by: Baader Web Team (Admin) on Aug 11, 2022 10:11:00 AMBaader Planetarium GmbHOur company exists now for more than 50 years. In this time, more than 15.000 Baader Planetariums (the first patented product of our company) help all over the world to give students an understanding of astronomical correlations. In our own manufactory, more than 500 observatory domes have been produced and delivered turnkey-ready. Instruments and telescope accessories from "Baader" are known for their high qualities by many astronomers and universities. We consider it our duty and obligation, not only to sell telescopes, but an indivdually selected telescope system, that brings you a lifetime of joy.