Product Questions and Answers
If you have not found a suitable answer, you can ask your question here.
Optec TCF-Leo 3" low profile temperature compensating focuser
A small change in ambient temperature can cause otherwise sharp stellar images to bloat in size, ruining the final image and wasting precious observing time. The solution is a temperature probe built into the TCF series focusers- and this is a combination of Optec's time tested and proven TCF focuser with the FocusLynx Controller Hub.
Optec engineers have developed a low profile, yet extremely robust 3-inch focuser for telescope installations where back-focus is at a premium. With the width of a typical 1-1/4" eyepiece, the TCF-Leo provides a unique focusing solution for the Celestron EdgeHD and other telescopes with limited flange-to-focus distances. The proven FocusLynx control system operates the TCF-Leo and can be extended to provide control for a second focuser. It supports the optional Optec WiFi 802.11b/g Wireless Network Option (#1317506 , € 305,-) and the Optec FocusLynx Hand Control (#1317510 , € 199,-) .
The unique shape of the TCF-Leo is designed to fit neatly between the mirror and focus knobs of the Celestron EdgeHD C-11 telescope OTA. With a center-to-edge distance of about 2.2-inches (55mm), the TCF-Leo works exceptionally well with Innovation Foresight's On-Axis Guider, providing clearance for large cameras and filter wheels above either of the flat edges of the TCF-Leo. Additionally, the TCF-Leo's 3600 receiver fits directly on to the large 3-inch port of the Optec Perseus 4 Port Instrument Changer (#1317300 , € 5050,-) for ultra-fine focus of a large format camera.
The TCF-Leo supports several focuser connections including the OPTEC-3000 dovetail, a DSI 3.5" receiver, and a 3-inch split clamp for Wynne Correctors.
Scope of delivery:
- CF-Leo Low Profile Focuser,
- FocusLynx Control Hub,
- Precision temperature probe
- USB/Serial communications cable
- CAT-5e/CAT-6 Ethernet cable x 2,
- 12VDC power supply with cord,
- 5/64” T-handle hex key tool
Please note: If the Optec TCF-Leo 3" is adapted through the Optec 3600 dovetail, the Optec 3600DM Adapter to mount 3" TCF onto C11/C14 (#1317556 , € 135,-) is necessary. For a non-software controlled focusing the Optec hand controller is required
The Optec FocusLynx Controller Hub is necessary for operating and is included. (#1317500)
With the FocusLynx Controller hub you can link the focuser to the same control hub that functions with any FocusLynx product - allowing you to more deeply integrate this with the rest of your setup! The integration of the FocusLynx with the TCF focuser expands the compatibility of its serial protocols from PC to also include USB, Ethernet, and Wireless WiFi capability - a noticeable upgrade in the ease of usability for the setup as a whole, as it allows you to have a much easier time linking this top quality focusing device to your PC or Laptop to control it remotely.
More details about the Optec FocusLynx control unit can be found here: FocusLynx Dual-Focus Control System.
Read more detailed informaton about the Optec Motorfoucer Programm by Baader Planetarium here.
Software and Driver Download
Visit the FocusLynx Commander download page from Optec for the latest updates and ASCOM driver, FocusLynx Commander control software and additional resources.
If you have any further questions, please send us an email to kontakt (at) baader-planetarium.de.
Please note the additional details on the Tab "Downloads"
|Focuser Travel||0.35" (8.9mm)|
|Focuser Steps per Revolution||112.000 Schritte/ 0.08 Mikrometer|
|Payload Capacity (kg)||ca. 9 kg|
|Power Input||12VDC 1,25A Power Supply - 110-240VAC Input|
|Thickness (mm)||1.25" (31.8mm) to 1.6" (40.6mm)|
|Telescope connection||OPTEC-3600 dovetail|
|Camera Connection||OPTEC-3000 3-inch drawtube (Default) , OPTEC-3000 3-inch drawtube (Extended Height) , DSI 3.5" receiver, 3-inch split clamp for Wynne Correctorsn|
|PC Connectivity||USB/Serial, Ethernet, or optional 802.11 WiFi|
|Connection to FocusLynx||Focuser 1: RJ45 socket for standard Cat-5e/Cat-6 to focuser, Focuser 2: Optional second stepper board for RJ45 socket, Power: 12VDC input, 2.5 x 5.5mm plug, center pin positive, Network: Standard RJ45 Ethernet socket, Serial: RJ12 socket for Optec USB/Se|
|Optional Accessories||WiFi Connection (802.11b/g compatible), Hand controller|
|Focuser size||3 inch|