Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
If you have not found a suitable answer, you can ask your question here.
For adapting any cell mounted Baader 2 inch Filter onto a camera lens with 52mm front filter thread you will need:
#2408166 Baader DSLR 2" Filter-Holder M48 / SP54: https://www.baader-planetarium.com/en/baader-dslr-2%22-filter-holder-m48sp54.html
#2958052 Baader Lens-Adapter-Ring SP54 / M52: https://www.baader-planetarium.com/en/baader-hyperion-dt-ring-sp54m52-for-dtadapter-iiandiii-and-hyperion-eyepieces.html
Based on the SP54 thread, we offer many more adapters for various camera threads, our so-called Hyperion DT-rings. https://www.baader-planetarium.com/en/catalogsearch/result/?q=sp54
Both thread sizes come with our proprietary pitch - which is not the same for the female and male threads.
This is our own proprietary "emergency solution" for uniting a world were manufacturers all over the world copy from each other - to the point that there are almost a dozen different pitches in use for male and female threads. Traditionally US-companies used to do a UNF-based pitch and the rest of the world went for metric threads - but these do vary from 0.5 to 0.75.
For this reason it does not make sense to publish our non standard pitch because our pitch is made to cope with all existing metric and US-pitch standards - and as said - our solution has evolved from sheer necessity. It is a mixture of a queer pitch and under-/over-dimensioning . We will not want to declare this as a standard and get bashed up for it. It works for us and is a result of 20 years adaptation to fit our filters onto all crazy threads we have seen. And inspite of this - every now and then there comes another "dragonboat-eyepiece" were even our filters may not fit...
In relation to both Filters' Wavelength Spectrum Response what alternative Filter(s) do you have that has the nearest spectrum response in the 50 x 50mm unmounted version? Preferably 3mm thickness.
The reason for this enquiry is to have a useful 'Luminesence' filter for Lunar and Planetary Astrophotography when the rest of the filters are for Deep Sky Imaging (Baader CCD Complete Filter Set II 50 x 50mm #2459544).
Answer in detail: We are sorry, we never felt the Neodymium-Filter to be of intense enough value for CCD-imaging (but very nice for planetary lucky imaging!), hence it is being handled as perfect visual/videography filter here and only av. cell-mounted in 1 1/4" and 2" (2" being a size which already does serve well for DSLR-imaging and were we have all adapters available to put this filter in front of any DSLR-camera lens - or to use our UFC- filter changer for mounting it in front of any CCD-camera.
The neodymium substrate will become very expensive in 50x50 x3 mm size and we already must go through a lot of glass to cancel out substrates with striae and other pouring defects. If you find someone offering this substrate in that size and thickness, you should very carefully check it for optical defects as most people do not do this careful glass selection, nor do they polish each filter substrate on an auto-deck-polisher, nor do they apply a truly high efficient BBAR-coating on both sides. Actually most are just usurping the name of the substrate while supplying very mediocre optical quality.
If you have evidence of people using our smaller neodymium-filters successfully as "L-filter" substitute in a regular CCD-camera filter wheel, then please let us see the links. If it is reasonable we may enter into such a project - but the resulting price may be double of a cell-mounted 2" filter. Also keep in mind that the 1 mm added thickness will definitely cause some loss in transmission!
Regarding the IR-pass-filter in 2 mm thickness: These are perfect for lucky imaging/videography. Hence 95% of these filters are being sold in the 1 1/4" cell-mounted version in 2 mm thickness. Again - offering this in 3 mm thickness will reduce transmission and not offer enough benefit for regular CCD-imaging (just our 2 ct´s).
So yes, the filter can be used with colour cameras, too, if they are sensitive for IR.
To take RGB, you have to remove the filter and then can take RGB in one shot as usual. If possible, replace it with a UV/IR-cut filter like Baader UV/IR-Cut / L-Filter 1¼" – CMOS-optimized #2961570. The focus or your telescope's color correction might beslightly different for RGB and IR, so check the focus again.
For changing the filters, we'd recommend either filter drawers like our UFC system, or a filter wheel. That's the fastet way, and you don't change the orientation of the camera, which makes combining the colour channels easier, and you can use flats.
- Related Articles
|Technical Data not yet specified||Please choose product variant from dropdown above to see technical data of your chosen product|
> 100 Downloads
> 100 Downloads