For adapting any cell mounted Baader 2 inch Filter onto a camera lens with 52mm front filter thread you will need:
#2408166 Baader DSLR 2" Filter-Holder M48 / SP54: https://www.baader-planetarium.com/en/baader-dslr-2%22-filter-holder-m48sp54.html
#2958052 Baader Lens-Adapter-Ring SP54 / M52: https://www.baader-planetarium.com/en/baader-hyperion-dt-ring-sp54m52-for-dtadapter-iiandiii-and-hyperion-eyepieces.html
Based on the SP54 thread, we offer many more adapters for various camera threads, our so-called Hyperion DT-rings. https://www.baader-planetarium.com/en/catalogsearch/result/?q=sp54
Both thread sizes come with our proprietary pitch - which is not the same for the female and male threads.
This is our own proprietary "emergency solution" for uniting a world were manufacturers all over the world copy from each other - to the point that there are almost a dozen different pitches in use for male and female threads. Traditionally US-companies used to do a UNF-based pitch and the rest of the world went for metric threads - but these do vary from 0.5 to 0.75.
For this reason it does not make sense to publish our non standard pitch because our pitch is made to cope with all existing metric and US-pitch standards - and as said - our solution has evolved from sheer necessity. It is a mixture of a queer pitch and under-/over-dimensioning . We will not want to declare this as a standard and get bashed up for it. It works for us and is a result of 20 years adaptation to fit our filters onto all crazy threads we have seen. And inspite of this - every now and then there comes another "dragonboat-eyepiece" were even our filters may not fit...
Colour filters for increased contrast of lunar and planetary observations
"Less is more!" Better a few filters with high optical performance produced for astronomical observations than whole mountains of filters with mediocre quality.
The Baader colour filters are carefully prepared for amateur astronomical interests. The glass are coplaner fine optically polished. These filters exceed the quality of the usual "raw polished" (hot flamed) coloured glass filters.
Because they are fine optically polished, these filters can be at any point in the mean path - far ahead of the focal point (for example, in front of a binocular approach!) without causing defects (astigmastism) or to degrade the image otherwise in any way!
The parallelisn of the optical surfaces is excellent with 30 arcseconds. Double images are absolutely excluded. For each filter colour, the transmission curve is supplied as a measurement protocol.
Colour filters are often identified with a Kodak Wratten number (W-point). Baader colour filters were collected by astronomical experience and correspond to the respective wavelength range following filter by Wratten nomenclature: Baader-red filter ≅ W25, Baader-Orange filter ≅ W21, Baader-yellow filter≅ W12, Baader-green filter≅ W58, Baader-light blue filter ≅ W80A, Baader-dark blue filter≅ W38A
These filters are screwed into the filter thread of eyepieces or planetary imaging cams (Skyris). A thread at either end of the filter allows the filters to be combined with each other or with other filters (for example with a Baader UV / IR infrared cut filter).Transmission curves of 6 Baader color filters (dark blue, light blue, green, yellow, orange and red)
Click here to enlarge
Features at a glance
- Largest free opening of all colour filters on the market to elimante any vignetting.
- CNC machined "grip crown" provides excellent handling and comfort.
- Both sides 7-layer AR coating with only 0.25% residual reflection per surface. This is the most antireflective that has ever been undertaken with color filters.
- The most important criterion for any kind of light filtering is brigthness. Certain spectral ranges at high magnification will only work at the highest light transmittance.
- The long-pass filter in this filter set offers 98% transmission and produces no flare. Unmatched by other brands. This can be seen in comparison with standard colour filters at once - the filter colour radiant downright.
- The combination of our infraread (IR) cut filter 1¼" and the RG 610 red filter results as an extremely narrow-band H-α pass filter for the CCD photography of red emission nebulae - at a ridcidulously low price!
- A wide range of adaptors allow the uses of T-2 photo threads (See: Baader Astro T-2 System™).
Baader Phantom Group Coating™
Developed by Baader Planetarium the coating is a 7-layer broadband coating with extremely low residual reflection. The term "Group" indicates that the respective most effective anti-reflection layer system was calculated for each type of glass of the filter.
This means that the anti-reflection layers of different colour filters are different. They are calculated to provide the mximum for the respective filtered colour transmission values.
Both sides of the filter are coated with 7-layer AR coating with only 0.25% residual reflection per surface. This is the most that has ever been provided for colour filters. The filter discs are screwed into the blackened aluminium frames and are delivered within a filter. Each filter is designed for multiple applications.
|Technical Data not yet specified||Please choose product variant from dropdown above to see technical data of your chosen product|