Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2957262
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Adapter cable from Steeldrive II Controller AUX Port to Cinch for common heat pads with up to 10W.
- It enables the precise temperature control of e.g. dew shield heaters, optical filters and instruments with of +/-0.1 degree accuracy via the AUX input.
- Connected directly to the Steeldrive controller
- The power can either be set in the SteelGo software, or you set a desired temperature for one of the temperature sensors. This prevents undesired heating of the telescope, because you keep the dew cap just above the dew point.
-
# 2457020
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube
- 4mm hex-wrench included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Includes Baader Standard Base
-
# 2459124
€ 36.00 Price excl. German VAT tax (19%): € 30.25- Baader UFC S70 Dovetail-Adapter
- Telescope-sided with mounting plate for UFC-Base (screws included)
- Camera-sided with S70 dovetail to stack several UFC bases in order to be able to use more then one filter in the light path
- Enables Special applications for IDAS photography, image composition as well as stacking
- Can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)
-
# 2958080
€ 19.00 Price excl. German VAT tax (19%): € 15.97- To connect DSLR T-rings
- Connection to the Astro T-2 system for classical eyepiece projection
- For Hyperion and Morpheus® eyepieces
- For a larger scale projection can be additionally T-2 extension tubes (M42 x 0.75, available in lengths of 7.5 / 15/40 and 8-14 mm variable) Screw
-
# 2451555
€ 540.00 Price excl. German VAT tax (19%): € 453.78- 8" (203mm) clamp width, gets mounted for example onto 10Micron GM 3000 or GM 4000
- Suitable for 10Micron/Baader 8" dovetail bar #1454540 as well as for Planewave OTA's CDK 17, CDK 20 and CDK 24.
- Pre-drilled on both sides to adapt Baader-Sidewings #2451558. Both sidewings allow the adaptation of balancing baseplates, eg..: Baader Baseplate 400mm #1500340 or Baader Pan EQ clamps 190mm, 230mm, 370mm
-
# 2459213
€ 78.00 Price excl. German VAT tax (19%): € 65.55- DSLR Astro Conversion Filter (Baader-BCF 1)
- Planeoptically polished, with improved spectral transmission
- Fitting for all current Canon APS-C DSLR-Cameras
- List of (partly) older camera models, compatible with BCF-1 filter (no warranty for completeness):
Canon 7D / 40D / 50D / 60D / 70D / 77D / 80D / 100 D / 400D / 450D / 500D / 550D / 600D / 650D / 700D / 750D / 760D / 1000D / 1100D / 1200D / 1300D
-
# 2459097
€ 129.00 Price excl. German VAT tax (19%): € 108.40- Set consisting of four pieces 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 31 mm filter holder also available as single item: 31 mm filter holder for Baader FCCT (3D-printed) (#2459087 , € 38,-)
-
# 1508037
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Telescope-sided with M43 x 1 male thread, e.g. for Vixen instruments
- Eyepiece-sided with T-2 (M42 x 0,75) male thread
- This connection ring allows to connect e.g. a binoviewer or a ClickLock® eyepiece directly at the focuser with M43 x 1 female thread (e.g. Vixen / Lichtenknecker)
- Optical path length only 3 mm
- To use T-2 parts on a M43i x1 female thread (meaning a M43 female thread with 1mm pitch per turn), we recommend our Baader M43a x 0.75 / T-2a Adapter (e.g. for Takahashi) (#2458199 , € 37,-)
-
# 2451311
€ 477.00 Price excl. German VAT tax (19%): € 400.84- Telescope adapter for telescopes with IR90 - integrated Rotating Focuser to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connections on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical length: 40.9 mm
- Inner and outer diameter: D120a/ D85i
-
# 2951408
€ 178.00 Price excl. German VAT tax (19%): € 149.58- made of V2A stainless steel
- with CDP = Camera Docking Port, 47,8mm diam., ¼" photo-thread
- Ø160x60mm, bore Ø 40mm – may be extended up to Ø 56mm
- 8,5kg
-
# 2459195
€ 75.00 Price excl. German VAT tax (19%): € 63.03- UFC-Case for filter sliders with mounted filter
- Storage box with hinged lid holds all UFC filter sliders
- By popular request, we have published not only the simplified print data of the UFC case, but also the data set with a screw connection as hinge (for DIN 912 M4x10 screws). The Baader UFC case can now be ordered or is available free of charge as a 3d printable file. This can only be assembled with a little more mechanical skill, as you have to cut an M4 or M6 thread on the underside of the case in each case. You will also need the appropriate screws, which you can normally buy at a DIY store. We do not deliver screws matching the print data ourselves and ask for your understanding.
- STL files for free download are available under TAB DOWNLOADS. You only need to login with your customer account or register on our website.
Please note: The download file is licensed under the Creative Commons License CC BY-NC-SA 4.0. You may pass on the file under Attribution © Baader Planetarium GmbH as well as linking the license and indicating any changes. The file may not be used for commercial purposes. If the file is changed, it must be redistributed under the same license.
-
# 2408191
€ 40.00 Price excl. German VAT tax (19%): € 33.61- Eyepiece barrel reducing 1¼ "on 24.5mm
- With filter thread M28.5 for 1¼ "eyepiece
- For clamping of eyepieces with 24.5mm diameter at 1¼ "eyepiece holder.
- 6.5mm optical path length
-
# 1324000
€ 395.00 Price excl. German VAT tax (19%): € 331.93- Ring for dovetail for the Baader 3,5" Quick Changing Ring (#1324005 , € 275,-) to connect, rotate and change large cameras, spectrographs or visual accessories, as well as to the Securfit system rem and with adapters of the 2" and M68 system respectively.
- Suitable for Hedrick Focuser 3.5" for Planewave CDK 14 - 24"
- Creates a quick change and rotating device with standard load capacity when coupled with Baader 3,5" Quick Changing Ring (#1324005 , € 275,-)
- Quick release clamping for heavy accessories - with brass-clamping
-
# 2956800
€ 190.00 Price excl. German VAT tax (19%): € 159.66- The RCC I (Rowe Coma Corrector) is a Coma Corrector from Dave Rowe with Triplet Lense design for f/4 Newtons
- The RCC works from f/3.5 to f/6 - it is perfect on f/4
- Coma Corrector with backfocus 91,5mm
- reproduction scale is 1:1 - in contrast to many other coma correctors, the RCC is no Barlow lens which rely on a magnification to make the larger back-focus to the sensor possible
- The RCC is the only coma corrector which gives you enough back-focus for filter wheels or other accessories without changing the focal ratio
-
From: € 22.00 Price excl. German VAT tax (19%): € 18.49- Used for eyepiece projection with shift/sliding focuser
- Telescope side T-2 (M42x0.75) female thread
- Eyepiece-/camera side T-2 (M42x0.75) male thread
- High-quality Aluminum, available in different lengths
-
# 2458100
€ 87.00 Price excl. German VAT tax (19%): € 73.11- Precise focusing eyepiece holder 1¼"/T-2 (5mm focus travel)
- Requires only a slight turn of about 20" to securely lock any 1¼" eyepiece or accessory
- Eyepieces / CCD cameras sitting against rotation and are still not scratched!
- Telescope side with T-2 (M42 x 0.75) female thread.
-
# 2954200
€ 1,630.00 Price excl. German VAT tax (19%): € 1,369.75- Extended scope of supply: the Morpheus® 76° eyepiece set includes the Hyperion® / Morpheus® eyepiece case (#2454601) as well as the Baader Utility Bag for small accessories (#2954201)
- Full field sharpness: The sharp flat 76° field is unsurpassed by any other modern wide field eyepiece. On-axis sharpness and contrast rivals our best planetary eyepieces, while delivering nearly equivalent performance over the full field.
- Long Eye Relief and optimized for bino-viewing: Morpheus pushes the envelope of comfortable wide field viewing further than ever before, delivering close to 20mm of eye relief
- Low Distortion: The Morpheus optical design delivers exceedingly low distortion (angular magnification distortion)
- Photo-Video Adaption: Like their Hyperion siblings, all Morpheus eyepieces make superb imaging projection optics with the M43 thread
-
# 2954204
€ 275.00 Price excl. German VAT tax (19%): € 231.09- Full field sharpness: The ultra-sharp 76° undistorted flat field is unsurpassed by any other modern wide field eyepiece. Also on-axis sharpness and contrast rivals our best, ever released planetary eyepieces, the Zeiss Abbe ZAO I & II.
- Long Eye Relief and optimized for bino-viewing: ~ 20mm of eye relief provides that famous spacewalk feeling, incredibly impressive with bino and both eyes.
- Hard aluminium alloy with industrial quality UV-stabilized anodizing surrounds a set of 8 lenses with one ED- and two Lanthanum elements.
- 2" and 1¼" nosepiece: integrated into one eyepiece of 55mm max outer diameter, supports bino-viewing even for kids.
- Photo-Video Adaption: Like their Hyperion siblings, all Morpheus eyepieces make superb imaging projection optics with the M43 photo/video-thread
- Large scope of supply: includes amongst others Hyperion / Morpheus® M43 extension (#2954250 , € 20,-) and Eyepiece-Holster for Morpheus® eyepieces (#2954202 , € 10,-) – further accessories see product description
-
# 2961303U
€ 227.00 Price excl. German VAT tax (19%): € 190.76- 47.4 mm (2" w/o cell) x 2 mm Baader CMOS S-II f/2 Highspeed Filter – Precision Grade
- 2" Filter removed from filter cell, specially selected for use with 2" Filter sliders of the Baader FCCT (Filter Changer Camera Tilter) for RASA 8" and QHY cameras (various versions available)
- 6.5 nm FWHM, recommended for extremely fast optical systems from f/3.4 and faster
- Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
- Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
- Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
- Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies
-
# 2458220
€ 48.00 Price excl. German VAT tax (19%): € 40.34- Adapter 2.7"a UNF/24G (Astro Physics) to M68i x 1 (Zeiss)
- Reducing piece: converts an AP 2.7” female thread to an M68 x1 female thread
Shop By Brand
Shop By
- Price
- Stock Level
-
- (592)
- (41)
- (100)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (685)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)