Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
- Related Articles
-
Related Articles
-
Dovetail-bars and -clamps - the “Missing Link” for your equipment
Mounting accessories connect telescope and mount - be it for a permanent setup or to make quick changes from one instrument to the next possible. We can offer several bars and plates, so that you can adapt almost every telescope: Modell V (EQ) bars and clamps - for Vixen / Celestron / Sky-Watcher / Synta and many more. (Base width of the bar's prism: 44 mm. Bar width of the side facing the telescope: 70 mm) Modell Z bars and clamps - for Zeiss / Astro Physics (Base width of the bar's prism: 40 mm. Bar width of the side facing the telescope: 70 mm) Modell 3" bars and clamps - for Losmandy / Astro Physics (large) / Celestron (large) (Base width of the bar's prism: 76 mm, equals 3". Bar width of the side facing the telescope: 105 mm) Special lengths up to 6.000 mm long V, Z and 3" bars The matching accessories All of our dovetail bars do have integrated, deepened marking lines over the whole length of the bar. They mark the exact center line of the bar, as well as the seperation of the screw holes of Celestron telescopes and Astro-Physics mounting rings, so that you can easily drill...
-
Baader Custom Developments for telescope installations
We received a question from our customer about our turn-key telescope solutions. It was actually only a short question, but we answer it in detail to show you what kind of benefit it provides, when ordering a complete telescope system from us. The question: Could you tell me what the OTA rings on the TEC140 in the attached image (from a Baader installation) are. I can see that the outer rings are the Baader heavy duty rings but what out the inner rings (inside the larger, outer rings). Do you sell these inner rings? Our answer: In short: Unfortunately we cannot offer these as regular purchasable products. In detail: these inner rings are always specially made for each complete telescope project where we supply all instrumentation ourselves. Only in this case we have the telescopes all in house for combining, can measure the EXACT tube diameters and fabricate matching contact-pressure rings, to stiffen out the tube(s), so that there is no chance at all that the tube itself is getting deformed from the three pressure pins of the outer heavy duty guiding rings. Such precaution is mandatory if the owner wants to do unguided imaging, since otherwise the tube will get...
-
Additional Information
| Manufacturer | Baader Planetarium |
|---|---|
| EAN Code | 4047825044204 |
| SKU (#) | 2451661 |
| Net weight (kg) | 0.26 |
| Bar length | 200 mm |
| Clamping System | Dovetail clamp |
| Bar or Clamp? | Bar |
| Design | V (44mm) Celestron/Vixen |
| Thread Drillings for | Baader GuideScope Rings |
You may also be interested in the following product(s)
-
Baader Handle for Telescopes with two pc clamp V
€ 95.00 Price excl. German VAT tax (19%): € 79.83 -
TEC finderbracket and base
€ 220.00 Price excl. German VAT tax (19%): € 184.87 -
DADOS 20mm Positioning Eyepiece
€ 34.00 Price excl. German VAT tax (19%): € 28.57 -
TEC APO 180 f/7 Fluorite Apochromat
€ 26,100.00 Price excl. German VAT tax (19%): € 21,932.77 -
6kg counterweight for GM 2000 stainless steel (V2A)
€ 152.00 Price excl. German VAT tax (19%): € 127.73 -
12kg counterweight for GM 2000 stainless steel (V2A)
€ 208.00 Price excl. German VAT tax (19%): € 174.79
