Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
Sort by
Great to know that it can be fittted on a tripod.Can a camera plate like Manfrotto with 3/8 sliding screw be fitted on the center of the plate with the anti rotation lug in one of the holes.? That way the balancing plate can be mounted of a photo video mount for complete movement with two scopes mounted
Question by: Vaidyanathan Subramanian on Aug 21, 2020 8:54:00 AM | 1 Answer(s)
- Description
-
Details
Baader double-balancing plate-set with 3" plate, V-clamp and Stronghold
The Baader double-balancing plare-set is used to operate two telescopes with Vixen-style dovetails on one mount. It offers numerous connection options.
The Stronghold Tangential Assembly (payload: ca. 7 kg for photography) is used to align the second telescope perfectly parallel to the first one – simpler twin-mounts can't compensate diffences caused by the collimation or the tube clamps!
The set is made of the following parts:
- Baader double mounting plate and holder for guidescope rings (I & II), 300mm with 3" dovetail (#1500330 , € 122,-)
- Baader V-Dove Tail Clamp, Diam. 70mm, with one clamp screw (#2451530 , € 48,-)
- Baader Stronghold Tangent Assembly - Colour Black (#2450310S , € 315,-)
- Guidescope rings or other accessories mentioned below are not included!
The plate has got a length of 300 mm and a width of 100 mm. When you use the 3" Losmandy-style dovetail to put it on the mount, you can use it to balance the telescopes by moving it sideways.
The plate can also be mounted permanently onto the Dec.-head of many mounts which use the standard 3.2" hole pattern (e.g. 10Micron GM2000 and many AstroPhysics-mounts). It is also compatible with the Astro Physics twin-mounts #1401128 (13") and #1401129 (16") to install guidescope rings along a clamp plate, to perfectly balance two telescopes. In the center of the plate is also a large 3/8" photo thread.
The plate has also got bore holes for other clamps and scope rings. You can replace the Vixen-clamp or the Stronghold e.g. with Baader Pan 3 "/ EQ Dual clamp 230mm (for Losmandy and Vixen-standard) (#2451566 , € 260,-) or Baader PAN-EQ-Clamp V190 (EQ Standard) (#2451525 , € 219,-) . Alternatively, the clamp can also be used with Baader Guidescope rings BP I - 60-120mm (#1500201 , € 143,-) oder Baader Guidescope rings BP II - 110-160mm (#1500202 , € 186,-)
Related Articles
-
Baader Custom Developments for telescope installations
We received a question from our customer about our turn-key telescope solutions. It was actually only a short question, but we answer it in detail to show you what kind of benefit it provides, when ordering a complete telescope system from us. The question: Could you tell me what the OTA rings on the TEC140 in the attached image (from a Baader installation) are. I can see that the outer rings are the Baader heavy duty rings but what out the inner rings (inside the larger, outer rings). Do you sell these inner rings? Our answer: In short: Unfortunately we cannot offer these as regular purchasable products. In detail: these inner rings are always specially made for each complete telescope project where we supply all instrumentation ourselves. Only in this case we have the telescopes all in house for combining, can measure the EXACT tube diameters and fabricate matching contact-pressure rings, to stiffen out the tube(s), so that there is no chance at all that the tube itself is getting deformed from the three pressure pins of the outer heavy duty guiding rings. Such precaution is mandatory if the owner wants to do unguided imaging, since otherwise the tube will get...
Additional Information
| Manufacturer | Baader Planetarium |
|---|---|
| EAN Code | 4047825039439 |
| SKU (#) | 1500350 |
| Net weight (kg) | 1.30 |
| Bar length | 300 mm |
| Bearing surface | 300 mm |
| Screws included? | Yes |
| Dual mounting | Yes |
| Top plate mounting options | Pre-drilled for many bars and clamps, eg.: Baader Pan EQ clamps 190mm, 230mm, Baader V-Clamp or Stronghold Tangent Assembly |
| Bar or Clamp? | Bar |
| Design | 3“ (76mm) Losmandy |
| Thread Drillings for | 10Micron, Astro Physics, Baader GuideScope Rings, Baader Stronghold |
