Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
- Related Articles
-
Related Articles
-
September 27, 2017APF-R : Absolute Point of Focus
APF-R goes online as official plugin in Adobe Photoshop Christoph Kaltseis is a Photoshop expert and an experienced astrophotographer. In recent years, he has developed APF-R (Absolute Point of Focus),... -
December 4, 2023Baader Photometric Filters: Dark nebulae appear in...
Combination of photometric and RGB filters to highlight dark nebulae Photographing dark nebulae is a fascinating challenge for astrophotographers, often posing difficulties due to the low brightness and high contrast... -
November 11, 2022First Light: PlaneWave DeltaRho 350 Astrograph
I had the chance to test the DeltaRho 350 f/3 Astrograph (DR350) with the serial number 0003 – all in all this solution is absolutely remote capable! You can read... -
July 28, 2022Review: visual usage of the Baader RGB-B...
March 2021: The idea behind the visual use of blue filters from RGB palettes is that they have much higher transmittances in the blue value and steeper curve slopes than... -
December 19, 2019HALOS – viewed without prejudice
The moment you insert any type of filter into the optical setup, which consists of your specific camera, the appropriate flattener/reducer or coma corrector and the telescope, the filter becomes... -
July 1, 2015Information about Baader Filters and Filtercells
About Baader Filters The variety of uses for filters in amateur astronomy has considerably increased during the last decade, enabled by both more accurately manufactured optical accessories, and, above all, by the “digital revolution“.... -
February 23, 2022First Light with Baader SDSS filters by...
IntroIris NebulaPleiadesLDN 1495 Attn. click above images for complex content Both, CMOS and CCD cameras designed for (amateur) astronomy typically have a spectral sensitivity from 400nm to more or less... -
August 7, 2023Baader CMOS Optimized Filters: Unleashing the Full...
What do you look for in an astronomical filter? Everyone has different requirements and goals and with a myriad of filters available today; how do you choose the right filters...
-
Additional Information
| Technical Data not yet specified | Please choose product variant from dropdown above to see technical data of your chosen product |
|---|
FAQ
-
Please click on title to open or open/close all FAQs
-
Unmounted Filters – which side should face the telescope?
For our CMOS-optimized filters we have created the following images showing which side of the filter should face the telescope.
LEGACY FAQ for older unmounted CCD-Filters without black outer rim
Question in Detail:
I just bought LRGB 36mm unmounted filters. I have question: which side of filter should be placed towards telescope? Is it better way of distinguish than "more shiny surface towards telescope"?
Answer:
Always put the more reflective side towards the telescope side. To guide you we already put a small arrow on the filter rim, on those filters were the position matters. This arrow indicates which face of the filter should be directed towards the sky (telescope-sided). All cell-mounted filters are already oriented in a way that the most appropriate filter face is facing the sky when the filter would be mounted directly onto the front end of the nosepiece of a camera.
If you mount your filter the other way, any reflected light would have a short way to the camera sensor, resulting in a higher risk of getting some kind of back-reflections inside the camera field. Many sensors have highly reflective areas near to the light sensitive area, also the area with the bonding contacts is sometimes highly reflective.But: this is true only for instruments without optical elements near to the focal plane. If you have f.e. a coma corrector, field flattener, focal reducer, focal extender (to a lower degree due to concave surface), or in extreme cases a whole lens group for more complex field corrections a few centimeters in front of the filter it could be useful to flip the filter against the rule from above (thus having the arrow pointing away from the telescope). Cause in such cases the likelihood of reflections from the sensor could be lesser then fort- and back- reflections from such glass-surfaces. If in doubt, it helps to make some test images from a star field with bright stars, using the filter in both ways for comparison.
Should you really have some reflections with both positions it can be more effective to add a spacer between filter and camera, eventually shifting the reflection out of the image field. With focal correctors having curved surfaces changing the filter-lens distance could help also.
-
HALOS – viewed without prejudice
For our CMOS-optimized filters we have created the following images showing which side of the filter should face the telescope.
LEGACY FAQ for older unmounted CCD-Filters without black outer rim
Question in Detail:
I just bought LRGB 36mm unmounted filters. I have question: which side of filter should be placed towards telescope? Is it better way of distinguish than "more shiny surface towards telescope"?
Answer:
Always put the more reflective side towards the telescope side. To guide you we already put a small arrow on the filter rim, on those filters were the position matters. This arrow indicates which face of the filter should be directed towards the sky (telescope-sided). All cell-mounted filters are already oriented in a way that the most appropriate filter face is facing the sky when the filter would be mounted directly onto the front end of the nosepiece of a camera.
If you mount your filter the other way, any reflected light would have a short way to the camera sensor, resulting in a higher risk of getting some kind of back-reflections inside the camera field. Many sensors have highly reflective areas near to the light sensitive area, also the area with the bonding contacts is sometimes highly reflective.But: this is true only for instruments without optical elements near to the focal plane. If you have f.e. a coma corrector, field flattener, focal reducer, focal extender (to a lower degree due to concave surface), or in extreme cases a whole lens group for more complex field corrections a few centimeters in front of the filter it could be useful to flip the filter against the rule from above (thus having the arrow pointing away from the telescope). Cause in such cases the likelihood of reflections from the sensor could be lesser then fort- and back- reflections from such glass-surfaces. If in doubt, it helps to make some test images from a star field with bright stars, using the filter in both ways for comparison.
Should you really have some reflections with both positions it can be more effective to add a spacer between filter and camera, eventually shifting the reflection out of the image field. With focal correctors having curved surfaces changing the filter-lens distance could help also.
