Baader Planetarium

• suitable for Paramount MX mounts
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
• Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition

• Baader UFC 31 mm AUX-Filter-Holder
• suitable for unmounted, round 31 mm filters
• Requires 1x UFC D50.4 Slider #2459113
• gets mounted into the UFC D50 slider, this slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Baader T-Ring for compact cameras with Micro 4/3 on the Astro T-2 system
• Allows the connection of T-2 lenses with 55mm back focus
• The built in 19mm extension can be removed
• Without extension compact cameras with a short adapter are only 36mm from the T-2 thread

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• Fixed focal length of 5mm, 68° field of view – ease of view even at high magnifications!
• High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
• 1¼" and 2" barrels included, thus variable focal lengths
• Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible

• converts any 2" (SC) female thread into a M48 x 0.75 female thread - without extending the optical length
• initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic M48 x 0,75 (2" filter-)thread (see animation on the right)
• this adapter can also work as an expansion ring to convert a photographic M48-thread into a male 2" SC thread
• suitable for adaptation of any accessory with male M48 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
• Adapter with continuous 2" male and M48 female thread, frontsided two slits

• grease from fingerprints is as dangerous to optical surfaces and coatings as scratches.
• To prevent valuable parts from being damaged during assembly, we recommend these cotton gloves.
• With the cotton gloves you prevent fingerprints when handling with optical elements.
• Ideal for gentle work with lenses and other sensitive components.

• to connect Refractors with 97mm inner diameter
• fitting for many Synta and Celestron tubes
• only suitable for BDS-RT Diamond Steeltrack® for Refractors

• T-2/90° Baader Roof-Prism. Manufactured by Zeiss standard, both sides with T-2 system threads
• This Prism is multicoated and built in a solid metal body. T-2-thread on both sides, therefore extremely short and adaptable on every telescope-system.

• Inverter ring with continuous M54 x 0,75 male thread
• Converts an M54 x 0.75 female thread into an M54 x 0.75 male thread
• Optical length equals to zero, disappears completely between two M54 x 0.75 internal threads and therefore cannot become jammed. As soon as the connection is opened, the external thread ring is also loose
• Inside non-reflecting grooved and painted dead flat black

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Length: 350mm (14")
• Black anodized, without holes.
• Weight: 720g

• Schott RG 830 substrate with super stack dielectric coating
• for pure methane band transmission
• non-ageing sealed coating edges

• Used to adjust the working distance of larger cameras and similar accessories with M48 thread
• Telescope side M48 internal thread, 3.5 mm depth
• Eyepiece-/camera side M48 external thread, 3 mm depth
• 40 mm optical path length, high-quality Aluminum
• Also used as M48 / 2" nose piece with 36mm insertion depth, safety kerfs and 4 mm optical height

• ultra hard and bright O-III visual contrast for 6" and larger telescopes
• no visual color fringing, just pure O-III
• non-ageing sealed coating edges

• Handle for telescopes
• Includes 2 piece V clamp
• to mount onto EQ-5/HEQ-5 dovetail

• gets mounted eyepiece-sided directly onto the SolarSpectrum filter and reduces the previously by the telecentric system extended focal length again by a factor of 0.7
• Working distance: 110mm (Distance to the camera sensor)
• 2" male threads on both sides, fitting Universal Flange Adapter #2958240 (included with SolarSpectrum H-alpha filters
• Telecompressor is used to adjust the focal length to possibly poor seeing conditions and / or enlarging the field for photographic- or webcam applications

• Consisting of control transformer in plastic housing and base without transformer and control knob for the base.
• Allows to regulate the speed of the earth's circulation and to control the light intensity of the projection bulb
• Transformer is connected to the tellurium by a flexible cable, and therefore the star globe of the device is constantly rotatable around all axes with the internal gears
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.

• Ceramic socket for sun halogen bulb for  Replacement bulb (Halogen) without socket (#2000317 , € 33,-)
• Allows to use the new halogen bulb in old planetariums, which were operated with the Osram 8017/6V bulb.
• Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.