Baader Planetarium

• Baader Wide-T-Ring to connect Leica, Sigma, Panasonic-L cameras on the Astro T-2 system
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Leica, Sigma, Panasonic L-Mount
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• suitable for temperatures from -50°C up to +60°C
• wide stretched synthetic grease with constant viscosity across an extremely large temperature-range
• Especially suitable for use in the mirror sliding fittings of SC-telescopes (i.e. Celestron), as the grease does not produce any outgasing, does not react to vapor-pressure, does not harden over time - and does not decompose into a solid and a liquid part over time.

• Baader SLOAN-r' Bandpass Filter, suitable from f/15 to f/1.8
• SLOAN/SDSS (ugriz’) photometric filter with transmission according to SLOAN-specification
• Manufactured with most advanced ion beam coating technology / Daylight-Proof
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Equally suitable for modern CMOS cameras as well as for older CCD camera technologies

• Focal lengths Fine Tuning for Hyperion eyepieces (all focal lengths)
• Optical path length 14mm
• Spacer rings fit between the negative lens and the 2 "barrel, so that it matches the respective eyepiece to your needs.
• The 13 mm eyepiece transform e.g. no loss of quality in a 9- or 11 mm eyepiece.

• BMP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to the {{block type="core/template" template="wordpress/product/shortcode-global.phtml" shortcode="[product sku=\"2451210\"]"}
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height 108 mm

• BACHES M68 adapter adjustable, also in mounted state
• Allows to connect BACHES to the Baader (Zeiss) M68-System
• The M68-System allows attachment of BACHES to the most commonly used telescopes worldwide, also many cameras can be attached to this versatile system
• Optical length 0mm

• made of V2A stainless steel
• for axis diameter of 40 mm
• Diameter 185 x 60 mm
• 12kg

• Baader UFC T-2-Thread Adapter
• telescope-sided with T-2 inner thread
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions

• Cone-shaped/octagonal Steel pillar
• Payload capacity up to 600kg
• welded Steel, actively dampening vibrations
• with Internal tube of 3" inner width for cabeling through the pillar and mounting materail
• available in different sizes

• MicroGuide micrometric crosshair eyepiece incl. Log-Pot Illuminator and Batteries
• f = 12,5 mm, diversable usage
• The only micrometric crosshair guiding eyepiece on the market, still being produced with the original GenuineOrtho lens set

• Baader UFC M48 (m) Thread Adapter
• telescope-sided with mounting plate for UFC-Base (screws included)
• camera-sided with M48 male thread
• can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) and allows camera-sided adaptation of adapters/cameras with M48 female threads

• Baader M68a x 1 to FLI adapter flange
• telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 System
• camera-sided with Flange to connect FLI-ML and FLI-PL cameras
• Optische height: 10,5 mm, Inner diameter (clear aperture): 64 mm

• suitable for Paramount MX mounts
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
• Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition

• Baader UFC 31 mm AUX-Filter-Holder
• suitable for unmounted, round 31 mm filters
• Requires 1x UFC D50.4 Slider #2459113
• gets mounted into the UFC D50 slider, this slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
• Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily

• Baader T-Ring for compact cameras with Micro 4/3 on the Astro T-2 system
• Allows the connection of T-2 lenses with 55mm back focus
• The built in 19mm extension can be removed
• Without extension compact cameras with a short adapter are only 36mm from the T-2 thread

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• Fixed focal length of 5mm, 68° field of view – ease of view even at high magnifications!
• High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
• 1¼" and 2" barrels included, thus variable focal lengths
• Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible

• converts any 2" (SC) female thread into a M48 x 0.75 female thread - without extending the optical length
• initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic M48 x 0,75 (2" filter-)thread (see animation on the right)
• this adapter can also work as an expansion ring to convert a photographic M48-thread into a male 2" SC thread
• suitable for adaptation of any accessory with male M48 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
• Adapter with continuous 2" male and M48 female thread, frontsided two slits

• grease from fingerprints is as dangerous to optical surfaces and coatings as scratches.
• To prevent valuable parts from being damaged during assembly, we recommend these cotton gloves.
• With the cotton gloves you prevent fingerprints when handling with optical elements.
• Ideal for gentle work with lenses and other sensitive components.