Sorry that the micro guide is no longer in production
I have owned one of these for a number of years. I landed here because coincidentally I had just been reading up on the micro guide's history etc.
I have just read the comment that the micro guide is no longer in production unless sufficient demand is generated. Well, I have an interest in binary systems and do sometimes use my micro guide for measurement. I find the quality of the eyepiece excellent, of course. However, for anybody remotely considering adding their name to the notify when back in production list, I will add that I use the eyepiece regularly for very accurate polar alignment, i.e. my micro guide is heavily used and I would hate to be without it. Highly recommended.
Baader Micro Guide Okular an Variofinder 10x60 adaptieren:
Um das Baader Micro Guide 12.5 mm Okular (#2404300) mit dem Vario-Finder 10x60 verwenden zu können ist ein kleiner Trick notwendig. Da bei dem Micro Guide Okular die Okularblende konstruktionsbedingt weiter hinten (Richtung Okulareinblick) liegt, als z. B. bei den Morpheus Okularen, ist der Auszug des Vario-Finders zu lang, um auch noch „Unendlich“ fokussieren zu können. Wenn man aber das Micro Guide Okular mit der Q-Barlow Linse (#2956185) kombiniert, indem man das Linsenelement der Barlow-Linse in das Filtergewinde des Okulars einschraubt, kann man wieder „Unendlich“ fokussieren und hat noch den Vorteil einer um ca. Faktor 1,3-fach stärkeren Vergrößerung.
Baader FlipMirror II nun komplett mit dem Off Axis Guider
Gutes Produkt und es wird mit die Möglichkeit geben meinen Leitrohr wieder als Sucher bzw. für Großfeldfotografie zu nutzen.
Leider passt bei mir nur ein Okularguider. Da der Fokus relativ kurz ist. Durch ein T2 Gewinde an der Basis des OAG hätte da mann wahrscheinlich mehr Möglichkeiten gehabt in den Fokus zu kommen.
Messfeldokular orthoskopisch 1.25" beleuchtet mit 45° Gesichtsfeld
Das Messfeldokular von Baader stand schon lange auf meiner Wunschliste. Aber erst nach Erwerb der Ausrüstung für die Sonnenbeobachtung habe ich es erworben. Es soll zur Durchmessung von Sonnenflecken an meinem Refraktor eingesetzt werden. Dem Okular liegt eine ausführliche Anleitung in Deutsch und Englisch bei und diese zeigt verschiedene Anwendungsmöglichkeiten gut verständlich auf. Für mich eine klare Kaufempfehlung für ernsthafte Beobachtungen.
Der Off Axis Guider wurde zusammen mit dem Baader FlipMirror II Zenitspiegel #2458055 bestellt und trägt eine Alccd-QHY 5III 174 Guidingkamera. Die Lösung für das Neigen des Prismas im Gesichtsfeld führte bisher in meiner Praxis immer zu einem Leitstern. In einem Fall lichtete ich mit f/10 einen Asteroiden in einer recht sternarmen Gegend ab. Dank der Verstellung des Prismas hatte ich hier sicher eine Leitstern gefunden! Mit der Adaption des Guiders am Baader FlipMirror II Zenitspiegel hatte ich anfangs ein paar Startschwierigkeiten. Hier hatte ich anfänglich zu vorsichtig die beiden Madenschrauben, die den Guiderport am Flippmirrorarretieren, festgeschraubt. Nach kurzer Zeit bemerkte ich ein Verkippen der Guidingkamera bzw. des ganzen Off Axis Guiders. Hier darf man ruhig die beiden Schrauben sehr straff anziehen. Sonst wird der Guider nicht fest genug sitzen! Hier wäre m. E. eine Gewindelösung der Schnittstelle angebrachter.
Funktionell muss ich in meinem Fall keine Abstriche machen! Der Aufbau bleibt zusammenmontiert größtenteils am Teleskop oder wird als Ganzes in einem Koffer verstaut. Wieder montiert bleibt die Justierung erhalten. Alles ist sehr wertig verarbeitet. Ich kann den Guider nur weiter empfehlen.
Ach und alle die, die dem Off Axis Guiding skeptisch gegenüberstehen haben jetzt dazu keinen Grund mehr.
Ich gebe zu ... ich liebe Ortho-Okulare und besitze einige davon. Ein besonderes Schmuckstück ist seit bald 15 Jahren das Messokular. Positionsmessung eines Sterns ... Bestimmung des wahren Gesichtsfeldes ... Bestimmung der exakten Brennweite eines Teleskops ... all das und noch viel mehr ist möglich.
Selbst nach so langer Zeit ist der After-Sales bei Baader hervorragend. Mir ging die Anleitung abhanden ... ein Mail und ich habe innerhalb von 24 Stunden eine PDF-Kopie erhalten. Top!
Das Okular mit LED-Beleuchtung & Doppelfadenkreuz ist in Ordnung und wurde gebrauchsfertig geliefert.
Als gewissen Nachteil für Nachführzwecke stellte sich die rote Fadenbeleuchtung heraus, die selbst auf der kleinsten Stufe noch zu hell ist: Durch den Farbfehler des Auges ist entweder das Fadenkreuz oder der Nachführstern nicht fokal. Eine gelbe LED würde Abhilfe schaffen.
Wünschenswert wäre ein zentrales Fadenkreuz, da das von dem Doppelfadenkreuz gebildete quadratische Feld für längerbrennweitige Teleskope zu groß ist. und mehrere Bogensekunden betragen kann. Außerdem wäre eine Gebrauchsanleitung ebenfalls wünschenswert.
Unfortunately we cannot definitely answer your question without knowing more about your telescope, for example brand,. backfocus and rear thread. Please try to find this out by contacting the manufacturer of your telescope, and contact a Baader Planetarium dealer/distributor in your country
Answer by: Baader Web Team (Admin) on Apr 15, 2024 8:51:00 AM
Hello, I've buyed the #2956269 M68i x 0,75-ClickLock (Hexafoc: Bresser / Explore Scientific, Omegon) for my Ultra light dob 12' 2nd gen Explorer Scientific but It doesnt fix! Which one should I ask for?
Unfortunately we have no information about the threads on your telescope focuser. Therefore we cannot answer your question. Please contact the manufacturer he should be able to tell you the thread, then you can choose the right clamp from the list
Answer by: Baader Web Team (Admin) on Apr 11, 2024 9:26:00 AM
At half bandwith. The 10 nm O III filters were done with older coating technology, hence peak transmission was around 85% - which might be the core of your question. The newer 9 nm O III filters are three cavity filters with steeper slopes, higher peak transmission and better off band blocking – it is another coating technology alltogether.
Answer by: Baader Web Team (Admin) on Apr 11, 2024 8:28:00 AM
We must point out that purchasing the ERF from another source can lead to a repair becoming chargeable in the event of a defect during the warranty and guarantee period.
A normal ERF is cheaper to buy. But it does not have the same specifications as our DERF: Simple ERF filters are made of solid-colored red glass (Schott RG 610 or RG 630). This glass is a long-pass filter; it allows all energy to pass through from approx. 570 nm, including the full thermal radiation (NIR) above 630 nm.
The heat at the focal point is three times higher with this type of "protective glass" than with our dielectrically blocked D-ERF filter. As a result, the immersion oil in the stack of block glasses, polarizers and etalon in the H-alpha filter literally is getting boiled. An H-alpha filter that is permanently overheated in this way ages very quickly. We would not be able to maintain our 5-year warranty under any circumstances.
Incidentally, the colored glass from which these simple ERFs are made is very "soft" and chemically unstable (= prone to weathering). The soft molten glass tends to form streaks. When we were still working with this glass, we had to double-pass test each piece on the optical bench and had a high reject rate. This means that simpler ERF filters age due to the oxygen in the air if they are not coated, the surface becomes "rough" after a few years and the image contrast collapses.
The problem with the glass quality of the RG 610 remains even if a UV/IR-reducing coating is vapor-deposited. We have already done this many years ago as C-ERF filter (= Cool ERF), but after long-term experience we abandoned it again and the lesson learned was the development of the D-ERF (Dielectric ERF). Above all, the soft glass often warped during coating, which led to even more rejects.
There are manufacturers who offer such ERF or C-ERF filters but do not test every lens as thoroughly as we did on the optical bench. This explains the cheap offers of C-ERF and ERF filters on the market - for which the customer ultimately pays much more than if he had purchased a high-quality DERF, with significantly reduced image quality and reduced service life of the Halpha filter.
Our D-ERF filters are made of highly homogeneous, streak-free, finely polished BK-7 glass. They are painstakingly coated with a dielectric coating system that is resistant to ageing and precisely matched to the Solar Spectrum filters.
The Solar Spectrum filter only shows its most important advantages (ageing resistance, sharpness and contrast) with our dielectric „D“-ERF coating system were we have full control over the coating process and can verify it´s effectivity. Only then can we guarantee for the 5 years of ageing resistance for the Solar Spectrum H-alpha etalon-stack. Especially with a research grade filter, usage of a "normal" ERF is tantamount to "degrading" the filter. Every chain is only as strong as its weakest link.
Answer by: Baader Web Team (Admin) on Jan 23, 2017 10:39:00 AM