Baader Planetarium

• Telescope side with Carl Zeiss M68 thread / optical length = 109 mm
• Mirror repels UV and IR radiation, provides high security at the solar observation in white light and with Ha-sun filters
• Scratch-resistant, hard-coated mirror surface for safe cleaning, scratch-resistant even in extreme conditions
• DC design as # 2956100: Instead of 2 "barrel it has a M68 thread, which makes it possible to mount the mirrors on our extensive range M68 with the largest possible passage on many telescopes

• Reducing Adapter M54 to M48 with M54 female thread
• Changes the M54 male thread of an adapter into an M48 male thread
• Can be used to combine adapters with M54 male threads with accessories with M48 female thread
• Made of hardened, stainless steel

• 2 " retrofit kit for Hyperion ClickStop zoom eyepiece, consisting of the adapter ring M45 / 2" inside, as well as our 2 " barrel.
• 1¼" Hyperion Clickstop-Zoom-Eyepiece can be upgraded into a 2"

• 1kg Leveling Weight made of V2A stainless steel
• Axis diameter 16mm
• Diameter 75 mm x 30 mm
• Suitable for Baader Shafts for leveling counterweight M14, Ø 16 (various versions available) (150mm #2451554, 300mm #2451553)

• A Solar Shade made from Aluminium to clamp between any M68 connection
• Drilling for M68 threads
• Use as shade (glare protection) for visual observation / imaging through eyepiece or camera
• Used to shade the eyepiece or camera viewing opening from direct solar radiation during photographic- or visual solar observation in the H-alpha region with narrowband filters from SolarSpectrum

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
• consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height 6" (150 mm)

• Adapter with M68i x 1 (Zeiss) to 4,1"i UNF/24G for TEC 140 to 200 as well as Feathertouch 3,5" focusers
• Provides an M68 female thread to fit the shortest version of 2" ClickLock clamp or FFC/M68 Adapter-System
• Enables the connection of all M68 (Zeiss) system parts to the above mentioned focusers

• Baader H-alpha f/2 Highspeed Filter – Precision Grade
• 6.5 nm FWHM, recommended for extremely fast optical systems from f/3.4 and faster
• Specially designed for the special filter requirements when used with extremely fast f/2 optics like the Celestron RASA astrographs
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• BACHES M68 Adapter
• Allows to connect BACHES to the Baader (Zeiss) M68-System
• The M68-System allows attachment of BACHES to the most commonly used telescopes worldwide, also many cameras can be attached to this versatile system

• Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail
• Massive but lightweight EQ-clamp, 190 mm (7.5") long w. multi-contact ribbed dovetail face
• Bottom side featuring various predrilled hole patterns to fit onto DEC-face of most mounts (Takahashi, 10Micron, Astro-Physics, Vixen, Celestron)
• With an integrated 3 "dovetail, suitable for all mounts with 3" (Losmandy). Can therefore also be used for adapting telescopes with attached Vixen rails to 3" clamps
• Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)

• Combines Ultra Short 2 "terminal # 2458196, telescope with Carl Zeiss M68 threaded with Takahashi refractors
• To connect Baader TAK adapter M72 / M68 to Takahashi Mewlon reflectors, you need the Takahashi Mewlon auxiliary adapter M71_i / M72_i (#2558231)

• Baader Wide-T-Ring Canon R to connect Canon EOS R cameras on the Astro T-2 system and S52 dovetail
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• The illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Canon R Bayonet
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• Consists of Hyperion Universal Zoom Mark IV, 8-24mm eyepiece and Hyperion Barlow lens 2.25x
• This combination of Hyperion Zoom and Hyperion Barlow creates an all-in-one astro quality grade zoom providing a focal length range (with and without Barlow) from 3.6 to 24mm
• Includes all accessories that is delivered in the standard outfit of the Hyperion Zoom and Barlow
  • More Information about Hyperion Universal Zoom Mark IV
  • More Information about Hyperion Barlow lens 2.25x
• ATTENTION: Please note that this set of Zoom+Barlow is only meant for astronomical use. It will not come to focus in combination with spotting scopes

• Baader SLOAN-y' Bandpass Filter, suitable from f/15 to f/1.8
• SLOAN/SDSS (ugriz’) photometric filter with transmission according to SLOAN-specification
• Manufactured with most advanced ion beam coating technology / Daylight-Proof
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Equally suitable for modern CMOS cameras as well as for older CCD camera technologies

• Adapter Ring 2" outer thread to T-2 internal thread
• Advances T-2 male on 2" male
• Only 1mm optical length!

• Height  20 mm + leveling space 30-50 mm, incl. ground sill anchor
• Sutiable for the following Baader Medium Pillar (BMP) Levelling flanges:
  • Baader Medium Pillar (BMP) Levelling Flange For AstroPhysics 1200/1600 Mount (#2451173 , € 398,-)
  • Baader Medium Pillar (BMP) Levelling Flange for GM 2000 and AP 1100/900 GTO Mounts (#2451171 , € 445,-)
  • Baader Medium Pillar (BMP) Levelling Flange For ME/ME II Paramount Mounts (#2451180 , € 380,-)
  • Baader Medium Pillar (BMP) Levelling Flange For Paramount MX (#2451181 , € 445,-)
  • Baader Steel Levelling Flange for ALT 5ADN mounts (#2451160 , € 329,-)
  • Baader Steel Levelling Flange for ALT 7ADN Mounts (#2451161 , € 329,-)

The Baader levelling flange base is used to mount Baader leveling flanges on customer-provided pillars. Fastening material is included.

• Required to use Steplessly variable diaphragm 13 - 113mm (#2459300 , € 366,-)
• Suitable for sizes 135 and 160mm of the Frame for D-ERF Filters 75-180mm (various versions available)
• For optimum adjustment of a telescope aperture when observing with an H-alpha filter of Solar Spectrum (also suitable for other brands)
• Made of CNC-machined aluminum

• Steel Pillar Flange for GM 4000 Mount, to mount on top of pillar or leveling flange

• Baader UFC M68x1-Thread Adapter
• telescope-sided with mounting plate for UFC-Base (screws included)
• camera-sided with M68 (m) outer thread
• can be adapted via the included screws and the mounting plate to the UFC filter base #2459110 and allows camera-sided adaptation of adapters/cameras with M68 inner threads