Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451107
€ 131.00 Price excl. German VAT tax (19%): € 110.08- suitable for Vixen Sphinx mount
- suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
- also fits onto Vixen-, Bresser- or Sky-Watcher tripods
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2958552
€ 36.00 Price excl. German VAT tax (19%): € 30.25- Changer / Inverter Ring S52/M48 for T-Rings / Adapters with S52 dovetail
- Can be used to combine T-Rings with S52 dovetail with accessories with M48 thread (2" filter-thread) or further down to T-2 (with M48 / T-2 Ring #2958553)
- changes the S52 dovetail of a adapter into a M48 inner thread
- This inverter ring is also part of our Sony E/NEX T-Ring #2408317 and of the Protective Canon DSLR T-Ring #2958550
-
From: € 121.00 Price excl. German VAT tax (19%): € 101.68
- NOT suitable for visual solar observation. Only use for digital imaging with all high-end telescopes and extreme tele-lenses (lucky imaging technique). Suitable for highest magnifications and detailed imaging of individual sunspots
- AstroSolar PHOTO Film OD 3.8, mounted stress free in temperature compensated cell
- No astigmatism during winter observation or with temperature changes in summer
- Scope of Supply: BDSF (ASTF) Filter with apertures from 80 to 180mm (200 – 280mm not yet available) come with two sets of centering bolts in 38mm length. 3 bolts with 10mm diameter and 3 bolts with 20mm diameter, adjustable to the tube diameter of your telescope or dew cap. In addition three safety straps with glue-pads and three rubber plugs to cover the holes that are not used, mounting instructions.
-
# 2454307
€ 6.00 Price excl. German VAT tax (19%): € 5.04- SR41W/1.55V 10 pc
- For illuminator
- Not for VarioFinder
-
# 2454655
€ 16.00 Price excl. German VAT tax (19%): € 13.45- Rubber eyecup with M43 metal thread
- Holds absolutely tight on our Morpheus eyepieces due to the screw-on thread
- Material: silicone rubber - no aging, no plasticizer, no embrittlement
- Included since January 2018 with all Morpheus eyepieces.
- With the optional M43 extension # 2954250 (also included with the Morpheus eyepieces since January 2018), the eyerest can be increased by 7.5mm
- Fits also all other Baader eyepieces with M43 photo / video thread (Hyperion fixed focal length, Hyperion Zoom, Hyperion Aspheric)
-
# 2408300
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Baader T-Ring to connect Nikon DSLR cameras on the Astro T-2 system
- Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
- On the camera side: Nikon bayonet
- Telescope side: T-2 internal thread with 0.75mm pitch
-
# 2957304
€ 7.00 Price excl. German VAT tax (19%): € 5.88- Adapter for large telescopes made of ABS, for Sky-Surfer III
- fits onto Celestron, Vixen, Skywatcher-Norm
- Single price. Included in scope of supply of Sky Surfer III
-
# 2456005
€ 110.00 Price excl. German VAT tax (19%): € 92.44- Zenith Prisma T-2/90 ° with 32mm Prism
- Connection objective side: T-2 internal thread
- Connection eyepiece: T-2 external thread
- Excellent for Baader Maxbright binoviewer
-
# 2458237
€ 46.00 Price excl. German VAT tax (19%): € 38.66- Adapter with M68i x1 to M74i x1 female threads, to adapt M68 parts to focusers with M74 x 1 male thread, e.g. Skywatcher Esprit 120&150, TS-Optics and Omegon APOs 150/1000 with Linearpower focuser
- Changes a M68x1 (Zeiss) male thread into a M74 x 1 female thread
- Part is used in our M74i x 1 ClickLock clamp #2956274
- Optical height: 12,7 mm, Inner diameter (clear aperture): 67 mm
-
# 2458655
€ 0.00 Price excl. German VAT tax (19%): € 0.00- MIBAS is a virtual machine built on the Linux distribution Fedora with installed and ready to use IRAF (Image Reduction and Analysis Facility) and ESO MIDAS (Munich Image Data Analysis System) installations. IRAF and MIDAS comprise a plethora of established tools for image analysis in the field of astronomy.
- Dedicated software for automated wavelength calibration and data reduction pipelines for the BACHES Spectrograph.
- IRAF and MIDAS, preconfigured and ready to go.
- Includes ESO SciSoft astronomical software collection.
- Write publication grade science reports with includededitor and templates.
- Cross-platform.
-
# 2957262
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Adapter cable from Steeldrive II Controller AUX Port to Cinch for common heat pads with up to 10W.
- It enables the precise temperature control of e.g. dew shield heaters, optical filters and instruments with of +/-0.1 degree accuracy via the AUX input.
- Connected directly to the Steeldrive controller
- The power can either be set in the SteelGo software, or you set a desired temperature for one of the temperature sensors. This prevents undesired heating of the telescope, because you keep the dew cap just above the dew point.
-
# 2457020
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube
- 4mm hex-wrench included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Includes Baader Standard Base
-
# 2459124
€ 36.00 Price excl. German VAT tax (19%): € 30.25- Baader UFC S70 Dovetail-Adapter
- Telescope-sided with mounting plate for UFC-Base (screws included)
- Camera-sided with S70 dovetail to stack several UFC bases in order to be able to use more then one filter in the light path
- Enables Special applications for IDAS photography, image composition as well as stacking
- Can be adapted via the included screws and the mounting plate to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-)
-
# 2958080
€ 19.00 Price excl. German VAT tax (19%): € 15.97- To connect DSLR T-rings
- Connection to the Astro T-2 system for classical eyepiece projection
- For Hyperion and Morpheus® eyepieces
- For a larger scale projection can be additionally T-2 extension tubes (M42 x 0.75, available in lengths of 7.5 / 15/40 and 8-14 mm variable) Screw
-
# 2451555
€ 540.00 Price excl. German VAT tax (19%): € 453.78- 8" (203mm) clamp width, gets mounted for example onto 10Micron GM 3000 or GM 4000
- Suitable for 10Micron/Baader 8" dovetail bar #1454540 as well as for Planewave OTA's CDK 17, CDK 20 and CDK 24.
- Pre-drilled on both sides to adapt Baader-Sidewings #2451558. Both sidewings allow the adaptation of balancing baseplates, eg..: Baader Baseplate 400mm #1500340 or Baader Pan EQ clamps 190mm, 230mm, 370mm
-
# 2459213
€ 78.00 Price excl. German VAT tax (19%): € 65.55- DSLR Astro Conversion Filter (Baader-BCF 1)
- Planeoptically polished, with improved spectral transmission
- Fitting for all current Canon APS-C DSLR-Cameras
- List of (partly) older camera models, compatible with BCF-1 filter (no warranty for completeness):
Canon 7D / 40D / 50D / 60D / 70D / 77D / 80D / 100 D / 400D / 450D / 500D / 550D / 600D / 650D / 700D / 750D / 760D / 1000D / 1100D / 1200D / 1300D
-
# 2459097
€ 129.00 Price excl. German VAT tax (19%): € 108.40- Set consisting of four pieces 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 31 mm filter holder also available as single item: 31 mm filter holder for Baader FCCT (3D-printed) (#2459087 , € 38,-)
-
# 1508037
€ 33.00 Price excl. German VAT tax (19%): € 27.73- Telescope-sided with M43 x 1 male thread, e.g. for Vixen instruments
- Eyepiece-sided with T-2 (M42 x 0,75) male thread
- This connection ring allows to connect e.g. a binoviewer or a ClickLock® eyepiece directly at the focuser with M43 x 1 female thread (e.g. Vixen / Lichtenknecker)
- Optical path length only 3 mm
- To use T-2 parts on a M43i x1 female thread (meaning a M43 female thread with 1mm pitch per turn), we recommend our Baader M43a x 0.75 / T-2a Adapter (e.g. for Takahashi) (#2458199 , € 37,-)
-
# 2451311
€ 477.00 Price excl. German VAT tax (19%): € 400.84- Telescope adapter for telescopes with IR90 - integrated Rotating Focuser to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connections on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical length: 40.9 mm
- Inner and outer diameter: D120a/ D85i
-
# 2951408
€ 178.00 Price excl. German VAT tax (19%): € 149.58- made of V2A stainless steel
- with CDP = Camera Docking Port, 47,8mm diam., ¼" photo-thread
- Ø160x60mm, bore Ø 40mm – may be extended up to Ø 56mm
- 8,5kg