Baader Planetarium

• Baader M68a x 1 to FLI adapter flange
• telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 System
• camera-sided with Flange to connect FLI-ML and FLI-PL cameras
• Optische height: 10,5 mm, Inner diameter (clear aperture): 64 mm

• suitable for Paramount MX mounts
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
• Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition

• Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
• Optical length: 20mm
• Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
• adapts onto male T-2 thread
• First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters

• Baader T-Ring for compact cameras with Micro 4/3 on the Astro T-2 system
• Allows the connection of T-2 lenses with 55mm back focus
• The built in 19mm extension can be removed
• Without extension compact cameras with a short adapter are only 36mm from the T-2 thread

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• Fixed focal length of 5mm, 68° field of view – ease of view even at high magnifications!
• High quality Phantom Group-Coating in Zeiss class for complete freedom from reflections with maximum contrast
• 1¼" and 2" barrels included, thus variable focal lengths
• Includes many threads for camera and accessory adaptation, afocal and classical eyepiece projection is possible

• converts any 2" (SC) female thread into a M41.5 x 1 female thread - without extending the optical length
• manufactured to adapt our Hyperion Universal Zoom Mark IV straight onto any spotting scope - such as Bausch & Lomb-, Opticron- and Kowa-Base - equipped with M41.5 male thread (see animation on the right)
• Note: for fitting the optical nose of the Zoom into the receptor at some spotting scopes, the thin dust cover ring needs to be removed - see images
• Adapter with continuous 2" male and M41,5 x 1 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )

• grease from fingerprints is as dangerous to optical surfaces and coatings as scratches.
• To prevent valuable parts from being damaged during assembly, we recommend these cotton gloves.
• With the cotton gloves you prevent fingerprints when handling with optical elements.
• Ideal for gentle work with lenses and other sensitive components.

• to connect Refractors with 97mm inner diameter
• fitting for many Synta and Celestron tubes
• only suitable for BDS-RT Diamond Steeltrack® for Refractors

• T-2/90° Baader Roof-Prism. Manufactured by Zeiss standard, both sides with T-2 system threads
• This Prism is multicoated and built in a solid metal body. T-2-thread on both sides, therefore extremely short and adaptable on every telescope-system.

• Baader levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Suitable as a pillar adapter flange to
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Overall height: 150 mm

• DT Adapter II & III and Hyperion Eyepieces
• The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.

• Length: 350mm (14")
• Black anodized, without holes.
• Weight: 720g

• Schott RG 830 substrate with super stack dielectric coating
• for pure methane band transmission
• non-ageing sealed coating edges

• M48 male thread quick coupler with 50 mm dovetail
• Creates a quick change and rotating device with standard load capacity when coupled with Baader M48 Heavy Duty Quick Changer (#2958590 , € 90,-) , part of Baader Heavy Duty M48 Quick Changing System (#2958593 , € 127,-)
• Quick Changing Ring made from high performance steel
• The changing system fits between any M48 connection
• Optical length: 4mm

• The fringe killer blocks defocused light in the blue spectrum, as well as in the red part of the spectrum (IR) above 700nm, usually seen in small achromat telescopes.
• The smaller details on craters of the Moon and planetary surfaces are so much more visible!
• Planeoptically polished; can be used well before the focal point of the optical system, without any loss of sharpness, as a single filter in front of a binocular for afocal projection with digital cameras.
• Provides the brightest picture of all industrially manufactured colour error-correction systems. Thus, the Fringe-Killer is a must for small refractors!
• Fringe Killer with Celestron 11" Edge HD reducer. Blue fringe reduction - not just for refractors: Celestron Edge + Reducer - some experiences and experiments
  

• Handle for telescopes
• Includes 2 piece V clamp
• to mount onto EQ-5/HEQ-5 dovetail

• gets mounted eyepiece-sided directly onto the SolarSpectrum filter and reduces the previously by the telecentric system extended focal length again by a factor of 0.7
• Working distance: 110mm (Distance to the camera sensor)
• 2" male threads on both sides, fitting Universal Flange Adapter #2958240 (included with SolarSpectrum H-alpha filters
• Telecompressor is used to adjust the focal length to possibly poor seeing conditions and / or enlarging the field for photographic- or webcam applications

• Additional optical spacer ring with 0.5mm thickness to achieve a perfect fine focus in case of focus problems
• Can be used for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) as well as for Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-) verwendbar
• only needed for retrofitting in case of focus problems, two pieces of 0.5mm distance rings are already included in the basic equipment of both FCCTs