Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2451188
€ 535.00 Price excl. German VAT tax (19%): € 449.58- BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
- suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)
- Consisting of two solid Steel, separated by six steel bars
- Top plate precision milled flat and threaded to fit the base plate.
- Overall height: 100 mm
-
- Turn-key Observatories (2.1 - 8.5 Meter) are available as classic slit-domes or as AllSky domes
- Includes all steps to a fully functional remote (robotic) controlled observatory: Consulting on dome model and building sites, suggestion on equipment such as mount, telescope and accessories, as well as transport, installation and training
- Various electronic features possiple, from classic observatory use over remote controlled use up to fully robotic and autonomical dome
- Customized to your needs, suitable for all kinds of uses, for amateur use but also schools, universities and science
-
# 2459114
€ 51.00 Price excl. German VAT tax (19%): € 42.86- Baader UFC Filter Slider / Filter Container 50x50
- suitable for unmounted, square 50x50 mm filters (up to 4mm thick)
- slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
- Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
-
# 2958525
€ 85.00 Price excl. German VAT tax (19%): € 71.43- C-Mount to Canon EOS Adapter Baader C-mount adapter for DSLR camera lenses
- To connect DSLR camera lenses or DMK video modules
-
# 2451108
€ 110.00 Price excl. German VAT tax (19%): € 92.44- suitable for Celestron / Sky-Watcher, EQ-6, NEQ-6 und AZEQ-6 mounts
- suitable for the Baader T-Pod Aluminium tripods 75-110 cm and 95 - 130 cm as well as Baader Hardwood Tripods (discontinued)
- Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
-
# 2958553
€ 25.00 Price excl. German VAT tax (19%): € 21.01- Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread
- Can be used to combine T-Rings with M48 inner threads with accessories with T-2 outer thread - with the additional Reducing piece S52 / M48 (#2958552 , € 36,-) this ring can be extended to a S52 dovetail
- changes the M48 inner thread of a adapter into a T-2 inner thread
- This inverter ring is also part of the Baader FlipMirror II Star Diagonal (#2458055 , € 228,-) , the Baader Wide-T-Ring Sony E/NEX Bayonet with D52i/M48 to T-2 und S52 (#2408317 , € 41,-) as well as the
-
From: € 529.00 Price excl. German VAT tax (19%): € 444.54- 2 ", 23 ° Safety Herschel Prism, utilizing special Phantom Group® coatings for glare control. 2” ClickLock® eyepiece holder.
- There is no better and safer method for uncompromising sharp solar observation / photography in white light.
- A special heat absorbing ceramic element traps radiant heat similar to the space shuttle heat tiles - without heating the surrounding area too. The fully enclosed housing adds to the safety and prevents the risk of glare.
- Please choose version from dropdown to see scope of supply
-
-
# 2454400
€ 275.00 Price excl. German VAT tax (19%): € 231.09- unique and extremely versatile telecompressor system that delivers the finest wide flat fields your SCT is capable of
- The result is a sharp, wide, flat field, at a fast focal ratio of f/5.9, optical length <50mm
- Please Note: The close coupling required for the telecompressor to reach focus with binoviewers limits it's use to only the Baader/Zeiss and Celestron binoviewers.
-
# 2458217
€ 133.00 Price excl. German VAT tax (19%): € 111.76- To connect all parts of the Baader M68 System directly to a Celestron or AstroPhysics 3,3" thread
- Suitable for direct connection to a EdgeHD 9¼"/11"/14" and SC 11"/14". Also suitable for Celestron- and Astro Physics-Reducers with 3.3" male thread
- Optical tube length only 7mm, total height of the adapter 17mm (can be threaded completely onto a 10mm long thread, e.g. by most Astro Physics reducers)
- Lens-sided 3.3" female thread, eyepiece-sided M68x1 female thread
-
# 2408319
€ 30.00 Price excl. German VAT tax (19%): € 25.21- Baader T-Ring to connect Canon EOS DSLR cameras on the Astro T-2 system
- Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
- On the camera side: Canon EOS Bayonet
- Telescope side: T-2 internal thread with 0.75mm pitch
-
# 2957305
€ 8.50 Price excl. German VAT tax (19%): € 7.14- Binocular-Adapter made of ABS, for Sky-Surfer III
- for Binoculars with front tripod thread
- Single price. Included in scope of supply of Sky Surfer III
-
# 2456005K
€ 136.00 Price excl. German VAT tax (19%): € 114.29- Containing: T-2/32 Diagonal with focusing 1¼" eyepiece clamp (#2458125) and 1¼" nose piece (#2458105)
- Connection objective side: T-2 internal thread 1¼ "barrel
- Connection eyepiece: T-2 external thread and focusable 1¼ "eyepiece
- Excellent for Baader Maxbright binoviewer
-
# 2458238
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Adapter with M68i x1 to M75a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 3.0" focusers with M75 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M75 x 1 male thread
- Part is used in our M75a x 1 ClickLock clamp #2956275
- Optical height: 8 mm, Inner diameter (clear aperture): 67 mm
-
# 2958028
€ 19.00 Price excl. German VAT tax (19%): € 15.97- DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
- SP54i / SP54a extension ring for connection required! (Item #2958090)
-
# 2957264
€ 73.00 Price excl. German VAT tax (19%): € 61.34- Metal Magnet Ring for Homing-Sensor of Steeldrive II - fitting for Baader Diamond Steeltrack® focusers
- If you have upgraded your Diamond Steeltrack® e.g. with a 2" Clicklock S58 eyepiece holder (#2956258) or if you use an adapter to a thread (T-2, M48 or M68), the Metal Magnet Ring is an alternative to the simple magnet holder which is included in the scope of delivery of the Steeldrive II (#2957165).
- The Steeldrive II motor unit features a contactless (wearfree) homing sensor (hall-effect sensor). It is activated by a magnet attached to the moving part of the focuser. It enables precise homing and repeatable approach of saved absolute positions as well as reference of the mechanical endstop.
- The Metal Magnet Ring is attached between the eyepiece clamp and the eyepiece extension. To install the magnet ring, at first you need to remove the 2" eyepiece holder or the thread adapter for e.g. T-2, M48 or M68. It must be installed parallel to the Steeldrive II.
-
# 2457030
€ 102.00 Price excl. German VAT tax (19%): € 85.71- Multipurpose Quick Release IV (MQR IV) 9x60 for all 60mm finderscopes with diameters of up 72mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube.
- 4 mm hex wrench is included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Quick and easily detachable – keeps its position with a precision of up to a hundredth of a millimeter
-
# 2459137
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Baader UFC S70 / M57 (m) Thread-Adapter
- telescope-sided M57 outer thread – for adaptation to Borg telescopes with M57x0.75 thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions
-
# 2958082
€ 22.00 Price excl. German VAT tax (19%): € 18.49- To connect Hyperion eyepiece to larger telescope systems
- For the DSLR 2 "filter holder
- For direct connection to all Hyperion eyepieces
- The Hyperion DT Ring SP 62i / M72A is also required
-
# 2451565
€ 315.00 Price excl. German VAT tax (19%): € 264.71- Fits all 3"Losmandy- and (Vixen/Celestron/Skywatcher)EQ-style dovetail bars
- PAN 3 "/ EQ 370, dual prism clamp, suitable for all 3-inch (Losmandy style) and simultaneously for all (EQ-style) dovetail rails Celestron / Vixen / Skywatcher
- With three wide, two-terminal blocks made of brass. Clamping handles flush with the ground surface - therefore fixed everywhere.
- With Allen screw head in the clamp handle (can be tightened with an Allen wrench) having toothed counter surfaces to maximize the points of contact with any track. Prefabricated pre-drilled for a variety of mounts.
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
Shop By Brand
Shop By
- Price
- Stock Level
-
- (592)
- (41)
- (100)
- Type of Adapter
-
- (18)
- (22)
- (2)
- (89)
- (26)
- (17)
- (30)
- (4)
- (47)
- (33)
- (7)
- (18)
- Design
-
- (15)
- (11)
- (4)
- (1)
- Thread Drillings for
-
- (5)
- (3)
- (4)
- (7)
- (13)
- (6)
- (7)
- (7)
- (6)
- (1)
- (3)
- Bar length
-
- (2)
- (6)
- (6)
- (3)
- (5)
- (2)
- (1)
- Bar or Clamp?
-
- (10)
- (18)
- Field of View
-
- (1)
- (17)
- (10)
- Eyepiece Focal Lengths (mm)
-
- (2)
- (1)
- (2)
- (5)
- (4)
- (4)
- (3)
- (1)
- (2)
- (1)
- (2)
- Optical Design
-
- (2)
- (4)
- (2)
- (3)
- (6)
- (2)
- (11)
- (4)
- (2)
- (2)
- (8)
- (1)
- Eyepiece Series
-
- (5)
- (2)
- (13)
- (10)
- Single or Set?
-
- (17)
- (5)
- Speciality
-
- (4)
- (1)
- (11)
- (21)
- (1)
- (1)
- (4)
- Focuser size
-
- (3)
- Focuser style
-
- (3)
- compatible telescopes
-
- (6)
- (9)
- (10)
- Optical tube length (mm)
-
- (159)
- (40)
- (9)
- (13)
- (3)
- (6)
- (7)
- (13)
- AstroSolar Film
-
- (5)
- (2)
- (2)
- (1)
- Usage
-
- (1)
- (3)
- (4)
- (10)
- (9)
- Solar Wavelenght
-
- (2)
- (10)
- Connections (eyepiece-/camera-sided)
-
- (19)
- (50)
- (1)
- (5)
- (8)
- (2)
- (1)
- (28)
- (17)
- (18)
- (6)
- (1)
- (8)
- (1)
- (14)
- (1)
- (7)
- (7)
- (4)
- (3)
- (39)
- (1)
- (1)
- (19)
- (3)
- (2)
- (1)
- (2)
- (11)
- (2)
- (1)
- (7)
- (1)
See more - Connections (lens sided)
-
- (14)
- (1)
- (1)
- (67)
- (2)
- (1)
- (7)
- (5)
- (1)
- (1)
- (29)
- (31)
- (1)
- (16)
- (1)
- (5)
- (9)
- (1)
- (5)
- (9)
- (1)
- (4)
- (1)
- (1)
- (2)
- (10)
- (5)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (26)
- (5)
- (1)
- (6)
- (2)
- (14)
- (2)
- (1)
- (2)
- (2)
- (5)
- (1)
- (7)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (9)
- (3)
- (1)
- (2)
- (4)
- (1)
See more - Tube Diameters
-
- (3)
- (3)
- (4)
- Manufacturer
-
- (685)
- Tripod, Pillar or Flange?
-
- (1)
- (3)
- (30)
- Filter size
-
- (63)
- (3)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (4)
- (1)
- (4)
- (42)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (4)
- (42)
- (1)
- (1)
- (1)
- (59)
- (22)
- (42)
- (42)
- (42)
- (13)
- Optical Design
-
- (6)
- (2)
- (6)
- (4)
- Size
-
- (2)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- Adapters Family
-
- (38)
- (18)
- (2)
- (21)
- (11)
- (44)
- Visual or Imaging?
-
- (20)
- (76)
- Filter shape
-
- (75)
- (42)
- (3)
- Type of Filter
-
- (4)
- (32)
- (2)
- (4)
- (7)
- (15)
- (1)
- (7)
- (3)
- (2)
- (1)
- Filter Usage
-
- (1)
- (1)
- (7)
- (54)
- (55)
- (12)
- (1)
- (3)
- (4)
- (4)
- (14)
- (11)
- (9)
- (12)
- (2)
- (9)
- (5)
- (6)
- (7)
- (1)
- (11)
- (7)
- (1)
- (2)
- (16)
- (1)
- Filter mounted
-
- (2)
- (64)
- (57)
- (2)
- Single or Set?
-
- (68)
- (10)
- Optical Design
-
- (1)
- Aperture
-
- (1)
- Focallength range
-
- (1)