Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 2957304
€ 7.00 Price excl. German VAT tax (19%): € 5.88- Adapter for large telescopes made of ABS, for Sky-Surfer III
- fits onto Celestron, Vixen, Skywatcher-Norm
- Single price. Included in scope of supply of Sky Surfer III
-
# 2456005
€ 110.00 Price excl. German VAT tax (19%): € 92.44- Zenith Prisma T-2/90 ° with 32mm Prism
- Connection objective side: T-2 internal thread
- Connection eyepiece: T-2 external thread
- Excellent for Baader Maxbright binoviewer
-
# 2458238
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Adapter with M68i x1 to M75a x1 male thread, to adapt M68 parts to Starlight Instruments Feathertouch 3.0" focusers with M75 x 1 female thread
- Changes a M68x1 (Zeiss) male thread into a M75 x 1 male thread
- Part is used in our M75a x 1 ClickLock clamp #2956275
- Optical height: 8 mm, Inner diameter (clear aperture): 67 mm
-
# 2958028
€ 19.00 Price excl. German VAT tax (19%): € 15.97- DT Adapter II & III and Hyperion Eyepieces
- The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and digital camera lens.
- SP54i / SP54a extension ring for connection required! (Item #2958090)
-
# 2957262
€ 29.00 Price excl. German VAT tax (19%): € 24.37- Adapter cable from Steeldrive II Controller AUX Port to Cinch for common heat pads with up to 10W.
- It enables the precise temperature control of e.g. dew shield heaters, optical filters and instruments with of +/-0.1 degree accuracy via the AUX input.
- Connected directly to the Steeldrive controller
- The power can either be set in the SteelGo software, or you set a desired temperature for one of the temperature sensors. This prevents undesired heating of the telescope, because you keep the dew cap just above the dew point.
-
# 2457020
€ 96.00 Price excl. German VAT tax (19%): € 80.67- Multipurpose Quick Release III (MQR III) 7x50 for all 50mm finderscopes with diameter of 62mm. Shipped with MQR IV guidescope rings, mounting plate and Baader Universal Red Dot Mount (RDM) (Universal holder for red dot finders) incl. Baader Standard Base
- With micro set-screws with M7 fine thread and PTFE-tips to avoid scratches
- You can use the enclosed M5x12-screws to adapt the dovetail rail directly to the base plate of the guidescope rings. This way, the finder can be mounted very close to the telescope tube
- 4mm hex-wrench included
- With dovetail rail – fits to (almost) all dovetail clamps by Vixen, Celestron, Synta etc.
- Includes Baader Standard Base
-
# 2459137
€ 39.00 Price excl. German VAT tax (19%): € 32.77- Baader UFC S70 / M57 (m) Thread-Adapter
- telescope-sided M57 outer thread – for adaptation to Borg telescopes with M57x0.75 thread
- camera-sided with S70 dovetail
- can be adapted via the S70 dovetail to the Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm) (#2459110 , € 58,-) as well as to UFC extensions
-
# 2958082
€ 22.00 Price excl. German VAT tax (19%): € 18.49- To connect Hyperion eyepiece to larger telescope systems
- For the DSLR 2 "filter holder
- For direct connection to all Hyperion eyepieces
- The Hyperion DT Ring SP 62i / M72A is also required
-
# 2451555
€ 540.00 Price excl. German VAT tax (19%): € 453.78- 8" (203mm) clamp width, gets mounted for example onto 10Micron GM 3000 or GM 4000
- Suitable for 10Micron/Baader 8" dovetail bar #1454540 as well as for Planewave OTA's CDK 17, CDK 20 and CDK 24.
- Pre-drilled on both sides to adapt Baader-Sidewings #2451558. Both sidewings allow the adaptation of balancing baseplates, eg..: Baader Baseplate 400mm #1500340 or Baader Pan EQ clamps 190mm, 230mm, 370mm
-
# 2459213
€ 78.00 Price excl. German VAT tax (19%): € 65.55- DSLR Astro Conversion Filter (Baader-BCF 1)
- Planeoptically polished, with improved spectral transmission
- Fitting for all current Canon APS-C DSLR-Cameras
- List of (partly) older camera models, compatible with BCF-1 filter (no warranty for completeness):
Canon 7D / 40D / 50D / 60D / 70D / 77D / 80D / 100 D / 400D / 450D / 500D / 550D / 600D / 650D / 700D / 750D / 760D / 1000D / 1100D / 1200D / 1300D
-
# 2459095
€ 137.00 Price excl. German VAT tax (19%): € 115.13- Set consisting of four pieces 3D-printed filter holder for unmounted 2" (Ø 47,4 mm) Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- We offer selected 2" filters especially for the FCCT in an unmounted variant, but basically all Baader 2" filters work when removed from the filter cell
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- 2" filter holder also available as single item: 2" (Ø 47,4 mm) filter holder for Baader FCCT (3D-printed) (#2459085 , € 40,-)
-
# 1508039
€ 22.00 Price excl. German VAT tax (19%): € 18.49- M 36.4 is standard of Vixen telescopes
- Telescope side external thread 36.4mm
- Focuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...)
- Optical path length = 0.5 mm
-
# 2451311
€ 477.00 Price excl. German VAT tax (19%): € 400.84- Telescope adapter for telescopes with IR90 - integrated Rotating Focuser to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
- Designed and manufactured in Germany
- Connections on camera side: 120 x 7.5 mm dovetail
- Black anodized
- Optical length: 40.9 mm
- Inner and outer diameter: D120a/ D85i
-
# 2951408
€ 178.00 Price excl. German VAT tax (19%): € 149.58- made of V2A stainless steel
- with CDP = Camera Docking Port, 47,8mm diam., ¼" photo-thread
- Ø160x60mm, bore Ø 40mm – may be extended up to Ø 56mm
- 8,5kg
-
# 2000301
€ 376.00 Price excl. German VAT tax (19%): € 315.97- hand-painted globe with graduation and moon on a chrome ring with a gear box.
- The gear regulates the following four functions
- The earth rotating around its own axis (rotation)
- Earth's axis pointing towards the celestial poles
- The motion ofthe moon around the earth
- The shifting ofthe lunar nodes. It causes that the position of the chromed ring in which the moon runs - the imaginary position of the moon's orbit to the earth changes according to the conditions in nature
- Replacement part for The Original: Baader Planetarium (#2000000 , € 2450,-) – already 1x included with the planetarium.
-
# 2408195
€ 48.00 Price excl. German VAT tax (19%): € 40.34- Eyepiece barrel 1¼ "with 36.4mm outer thread
- Telescope side with 36,4mm outer thread
- Focus side 1¼ "internal diameter
- To connect 1¼ "eyepieces to Vixen - Takahashi and Lichtenknecker Okularauszüge
-
# 1324000
€ 395.00 Price excl. German VAT tax (19%): € 331.93- Ring for dovetail for the Baader 3,5" Quick Changing Ring (#1324005 , € 275,-) to connect, rotate and change large cameras, spectrographs or visual accessories, as well as to the Securfit system rem and with adapters of the 2" and M68 system respectively.
- Suitable for Hedrick Focuser 3.5" for Planewave CDK 14 - 24"
- Creates a quick change and rotating device with standard load capacity when coupled with Baader 3,5" Quick Changing Ring (#1324005 , € 275,-)
- Quick release clamping for heavy accessories - with brass-clamping
-
# 2956800
€ 190.00 Price excl. German VAT tax (19%): € 159.66- The RCC I (Rowe Coma Corrector) is a Coma Corrector from Dave Rowe with Triplet Lense design for f/4 Newtons
- The RCC works from f/3.5 to f/6 - it is perfect on f/4
- Coma Corrector with backfocus 91,5mm
- reproduction scale is 1:1 - in contrast to many other coma correctors, the RCC is no Barlow lens which rely on a magnification to make the larger back-focus to the sensor possible
- The RCC is the only coma corrector which gives you enough back-focus for filter wheels or other accessories without changing the focal ratio
-
From: € 47.00 Price excl. German VAT tax (19%): € 39.50
- M68 extension tube for classic eyepiece projection or Fluoride Flatfield Convertors (FFC)
- Telescope side M68x1 male thread
- Eyepiece-/camera side M68x1 female thread
- High-quality Aluminum, available in different lengths
-
# 2458102
€ 14.00 Price excl. German VAT tax (19%): € 11.76- Altogether 15 pc - in 5 sizes, three rings per size (thickness 0.6/0.8/1.0/1.2/1.4mm)
- Well suited to tune the rotary position of all kinds of T-2 accessories in approx 90° increments, to move locking screws of eyepiece holders into a comfortable position asf.
- Also helps to prevent binding when used as spacer between two metal surfaces connected w. T-2 thread