Baader OMS-Nano – Remote Switch for 10Micron Mounts

More Views

Images uploaded by Customers

Add Your Review with Images
Baader OMS-Nano – Remote Switch for 10Micron Mounts

# 2455031

€ 280.00 Price excl. German VAT tax (19%): € 235.29

In Stock  

  • Remote Switch OMS-Nano (Observation Management System) used to turn your 10Micron mount on and off from remote
  • With 1m connection cable, 3m long LAN-cable and 2m long USB-cable
  • 12V/100-240V Power Supply
  • Incl. web interface and manual
  • Replaces the previous  Remote Switch for 10Micron mounts (#2455030 , € 265,-) , which is no longer produced.

Product Questions and Answers

Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".

Sort by ASC
What is the case for the Nano made out of?
Question by: Michael Regouski on Nov 2, 2022 9:30:00 PM | 1 Answer(s)

Rating of Question

I have connected to my internet router (as is the 10-micron mount), but I can't naviage to, I get a timeout error. I can see it as a wired client in the router settings.
Question by: Jake Noel-Storr on Dec 3, 2023 2:01:00 PM | 1 Answer(s)

Rating of Question

Great device but how to automatize its use using the ASCII commands on default port 17123? No information anywhere found in the manual... Thanks
Question by: Antoine on Feb 24, 2024 1:40:00 PM | 1 Answer(s)

Rating of Question



Baader OMS-Nano – Remote Switch for 10Micron Mounts

This remote switch is part of our OMS (Observatory Management System) product line and is named "OMS-Nano". It is the smallest unit currently available to make an observatory remotely operable.

The Remote Switch is perfect for permanent installation in an observatory. For reasons of failure safety, we have placed great emphasis on a safe standard. The module can be connected to the same LAN network as the mount. After installation, the module can be accessed in the network via the assigned IP address via any web browser. The OMS-Nano is preconfigured to be used directly for a 10Micron mount. All cables are prefabricated and enclosed. In addition, we have writen an instruction manual, which goes into the use with a 10Micron mount decidedly. 

Optionally, you can connect the switch module to your computer using the USB cable in order to configure the network settings of the switch module or to import firmware updates. For normal operation, you only need a connection via the network cable.

Each 10Micron GM or AZ mount can be switched on and off remotely via the external switching device OMS-Nano (Observation Management System). For this, the 3-pin stereo jack (1) EXT SWITCH is connected in parallel with its two front contacts (stereo left and right, without ground) to the ON / OFF switch (2) of the electronic module of the mount. The OMS-Nano replaces the function of the ON/OFF rocker switch and gives a signal for a few seconds, but not permanently.

 Baader OMS-Nano – Remote Switch für 10Micron Montierungen

Scope of delivery:

  • OMS-Nano switch
  • 12V/220V power supply unit with adapters
  • 3m LAN-cable
  • 2m USB-cable
  • incl. instruction manual

Additional Information

Manufacturer Baader Planetarium
SKU (#) 2455031
EAN Code 4047825051738
Compatible Brands 10Micron
Overall Average Rating:
1 review
5 star
4 star
3 star
2 star
1 star
  • Date - Newest First
  • Date - Newest First
  • Date - Latest First
  • Highest Rated
  • Lowest Rated
  • Most Helpful

1 Item(s)

Tapio 178/06/2023 28/06/202318:06
  • more than 2 year(s)
  • Rating:
Baader OMS-Nano – Remote Switch for 10Micron Mounts
I use OMS-Nano in my yard observatory with a fixed Ethernet connection. Works well, the only small minus was a typo in the user manual in the web address used for programming, which was corrected with one email. Good product, no need to build your own tunings to connect the power.
  • Easy and simple to use
    • @Tapio hey i want to install the ONS and cant find and connect it with the adress in the manual. What is the answer from Baader.Happy to get some informationRegards
      The review was a bit misleading. There is no typo in the user manual but indeed some speciality in the provide URL which is easy to overlook: The provided config URL is written with an underscore before config, like this "/_config.htm"
Show more comments (-4) Hide comments

1 Item(s)

What kind of abuse are you reporting?
    Please, wait...