Baader Z(AP)-Dovetail Clamp 200mm length

More Views

Images uploaded by Customers

No customer Image uploads yet. Add Your Review with Images

Baader Z(AP)-Dovetail Clamp 200mm length

# 1401130

€ 196.00 Price excl. German VAT tax (19%): € 164.71

In Stock

Be the first to review this product

Z-dovetail 200mm for Zeiss / Astro-Physics
With mounting standard for Astrophysics 900* (*additional Astro-Physics adapter #1401155 required) / 600/400 / Mach 1 Mounts
With two pressure-clamps (old designs)
Not compatible with Vixen

Qty:

Product Questions and Answers

Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".

Are the clamping screws long enough to also hold the Telementor/Telemator dovetail (35 mm versus 40 mm on the larger Carl Zeiss Jena telescopes) ?

Question by: Christian Mueller on Jan 21, 2023 8:04:00 PM | 1 Answer(s)

Rating of Question

Related Articles

Dovetail-bars and -clamps - the “Missing Link” for your equipment

Mounting accessories connect telescope and mount - be it for a permanent setup or to make quick changes from one instrument to the next possible. We can offer several bars and plates, so that you can adapt almost every telescope: Modell V (EQ) bars and clamps - for Vixen / Celestron / Sky-Watcher / Synta and many more. (Base width of the bar's prism: 44 mm. Bar width of the side facing the telescope: 70 mm) Modell Z bars and clamps - for Zeiss / Astro Physics (Base width of the bar's prism: 40 mm. Bar width of the side facing the telescope: 70 mm) Modell 3" bars and clamps - for Losmandy / Astro Physics (large) / Celestron (large) (Base width of the bar's prism: 76 mm, equals 3". Bar width of the side facing the telescope: 105 mm) Special lengths up to 6.000 mm long V, Z and 3" bars The matching accessories All of our dovetail bars do have integrated, deepened marking lines over the whole length of the bar. They mark the exact center line of the bar, as well as the seperation of the screw holes of Celestron telescopes and Astro-Physics mounting rings, so that you can easily drill...
read article
Baader Custom Developments for telescope installations

We received a question from our customer about our turn-key telescope solutions. It was actually only a short question, but we answer it in detail to show you what kind of benefit it provides, when ordering a complete telescope system from us. The question: Could you tell me what the OTA rings on the TEC140 in the attached image (from a Baader installation) are. I can see that the outer rings are the Baader heavy duty rings but what out the inner rings (inside the larger, outer rings). Do you sell these inner rings? Our answer: In short: Unfortunately we cannot offer these as regular purchasable products. In detail: these inner rings are always specially made for each complete telescope project where we supply all instrumentation ourselves. Only in this case we have the telescopes all in house for combining, can measure the EXACT tube diameters and fabricate matching contact-pressure rings, to stiffen out the tube(s), so that there is no chance at all that the tube itself is getting deformed from the three pressure pins of the outer heavy duty guiding rings. Such precaution is mandatory if the owner wants to do unguided imaging, since otherwise the tube will get...
read article
Astro-Physics – High-end German Equatorial Mounts

HIGH-QUALITY PROFESSIONAL ASTRONOMICAL MOUNTS Keeping to the same quality standards that have made the fully-apochromatic refractors legendary, Roland Christen's company has been building German Equatorial GoTo mounts for more than three decades. Their proven stability, accuracy and durability is the reward for anyone who can endure the traditionally long delivery times. Two "el Capitan" mounts are working in the Antarctic for several years now, even at temperatures of -75°C. They are perhaps the most spectacular example of the durability of the sturdy Astro-Physics mounts and are representative for many more exemplars that often run for decades at our customers without failures. With a very accurate manufactured worm gear the Astro-Physics mounts are equally well-suited for smooth, effortless tracking of celestial objects as well as for all visual and photographic purposes. Astro-Physics supplies 4 mounts with 30kg to 135kg instrument load. The GTO 1100 and GTO 1600 series are especially remarkable, because they are fully transportable - despite their high instrument load. This is possible because the declination axis can be separated from the rest of the mount. Even the GTO 1600, with 90 kg instrument load, can be transported and set up by one person! The connection of the two...
read article

Specifications

Additional Information

Manufacturer	Baader Planetarium
EAN Code	4047825018137
SKU (#)	1401130
Net weight (kg)	0.61
Bar length	200 mm
Clamping System	Dovetail clamp
Bar or Clamp?	Clamp
Design	Z (40mm) Zeiss/AstroPhysics
Thread Drillings for	Astro Physics

Reviews