Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
If you have not found a suitable answer, you can ask your question here.
Does this clamp center the accessory relative to the focuser tube?
1) How long is the overall length of this adapter including the 2" nosepiece. I know the optical length is 47mm, so how long is the attached 2" nosepiece?
2) How deep can a 2" eyepiece be inserted into this adapter? I have a 2" eyepiece with a 38mm nosepiece. Will I be able to seat it all the way in?
Chances are good that a SC-thread is used. If you can remove the eyepiece clamp from the star diagonal and screw it onto the 2"/SC-thread on the back of your telescope, then you can use Baader 2" ClickLock SC/HD (2") clamp (C5" - C9¼") #2956220. This clamp has got a female thread; If you need a ClickLock with a male SC-thread, you can convert it with Baader 2"/2" Inverter Ring with 48mm filter thread # 1508020.
Otherwise, we'd need to ask you to measure the thread of your specific star diagonal as described here: https://www.baader-planetarium.com/en/blog/clicklock-clamp-for-your-telescope/
If there is no thread available, but the telescope has got enough backfocus and already a 2" clamp, you can use either #2956237 37mm ClickLock extension or #2956247 47mm ClickLock extension, or even the Baader 2" ClickLock Diagonal Mirror #2956100 - then you don't have the Clicklock at the telescope, but at least you can use it whenever you change the eyepiece.
Otherwise, we need the specifications of your telescope - does it provide a thread or a dovetail, and can you unscrew your existing clamp? Then you can measure the thread as described here: https://www.baader-planetarium.com/en/blog/clicklock-clamp-for-your-telescope/ Chances are good that we already have a ClickLock with the matching thread.
#2956220 SC-Clicklock (for 6", 8", 9¼") or #2956233 SCL-ClickLock (11", 14")
#2956100 Baader 2" ClickLock Diagonal Mirror or #2456115 Baader 2" BBHS ® Mirror Diagonal with 2" ClickLock Clamp
optional: #2956214 Baader 2" to 1¼" ClickLock Reducer (T-2 part #15B) (all Hyperion an Morpheus eyepieces can be used with the 2" barrel; this reducer is only necessary for 1,25" eyepieces)
Especially if your telescope is mounted on an Alt-Az mount, you can use the Baader 2" NexStar locking ring #245827 instead ot the SC-ClickLock to permanently mount the mirror at the back of the telescope - if you remove the nosepiece from our star diagonals, you get an SC-thread which fits directly at the telescope. This way, so can save some space and do not risk that the telescope hits the base of the mount when you point it high at the sky.
outer end of the ClickLock #2956220 to the focal plane the distance is now 96,25 referring back focus 133,35 minus 37,1
The camera itself has 18mm backfocus (Sony e=eighteen bayonet) plus11mm for the bajonett/T2 Ring is reducing 96,25mm-(18mm+11mm)
so we have 67,25mm to brigde with following Items:
Left is now 2,25mm to take 1mm+1mm+0,3mm from this adjustment rings:
Please check if your bayonet is 11mm - for example, this ring is only 8,3mm:
Is this an issue or is it designed like this? I also thought that the part would be smooth when rotated, but I can feel distinct clicks so to speak. I just want to make sure that this unit is good and not defective, and I have never use this type of system before
The distinct clicks are part of the design. This was designed to let people hear and feel the lever position also in the dark.
2) Then, does the 4.1" i UNF part have a female thread of M68X1 like the separately sold product (# 2458191)?
3) Are the 3 set screw holes drilled on the 4.1" i UNF exactly the same as those on the Feather thouch focuser FT3545?
I have to screw The Baader ClicLock in the telescope, but i have no locking screws to secure the ClicLock to the telescope.
On my Skywatcher Mak 150 i also have a Baader ClicLock, and that one does have locking screws to secure the ClicLock to the telescope.
So why i can"t the ClicLock to my Apo?
The typical SkyWatcher-threads are:
#2956251 M54a x 0,75-2" (TS-Optics / SkyWatcher)
#2956254 M54a x 1-ClickLock (Skywatcher / Orion)
#2956256 M56i x 1-ClickLock (Skywatcher / Celestron)
#2956257 S57-ClickLock (Skywatcher / Celestron)
#2956274 M74i x 1-ClickLock (Skywatcher Esprit, TS-Optics, Omegon)
You can find a description on how to measure a thread here:
I have a Quattro and the manual says this is a 54.5mm x 1 thread. I have verified this by threading a 54mm x 1 accessory on to the scope and it was very loose. What exactly is the threading on your ClickLock?
gambling producing accessories for other brands. Hopefully Sky-Watcher won´t change it. Lastly our ClickLock will fit fine.
Much to my surprise, I found that the ClickLock is unable to lock the Skywatcher original coma corrector: even if the ClickLock is completely closed, the coma corrector still slips free in the focuser tube.
The same issue appears with the SharpStar 1X coma corrector.
Were you aware of this issue?
Thiis problem could be easily solved if the ClickLock was able to reach a slighly smaller diameter at its maximum closing position.
Is there anything I can do to solve this problem, other than return the ClickLock a use the original focuser adapter? I really love the ClickLock
Will this one work on SkyWatch EvoStar ED80? Any foreseeable limitations it may introduce?
Visual use is a bit complicated, because a star diagonal like #2956100 already has got an optical length of 112mm incl. Clicklock clamp. You can remove the nosepiece, then you'll have a 2"-thread with which you can attach it directly to the reducer - but you'll need the NexStar Locking Ring #2458270 to rotate it into a convenient position. It is 5mm thick - please check if the thread at the Celestron reducer is long enough.
But for visual observation, it is not as critical as for photography - we even have customers who have adapted a focuser to an EdgeHD and are happy with the results.
There are mana, many "micro-clicks" which you may or may not hear when operating the ClickLock - this sound has changed over time, and many customers prefer a silent Click. So, depending on the model, you may have to be very silent to hear the Click, if you can hear it at all. But the ratchet mechanism is still there and will keep the clamp in place once the eyepiece is locked. You don't need to apply force, just lock it "hand-tight".
We have described how to do it here: https://www.baader-planetarium.com/en/blog/clicklock-clamp-for-your-telescope/
Then, for example, you can screw on this Items:
https://www.baader-planetarium.com/en/baader-2%22-clicklock-eyepiece-clamps.html Item No. #2956268
An alternate if its back focus critical:
To be more flexible with this Items you´re able fast from visual to photographical or any other application:
But you can change any of our 2" diagonals by unscrew the 2" nose piece and 2"/M55 adapter to put on a M55/M68 adapter:
If you want to use a BBHS Mirror instead etc.
The eyepiece is 40mm, can i use the 90 dgree eyepiece with it so I can easily look up!
Or any other product can serve this purpose?
If you are in the USA, please contact alpineastro.com, our distributor for the USA. You can also use our dealer locator at https://www.baader-planetarium.com/en/storelocator
Please notice that this length starts from the outermost end of the thread - thereforer you only have
to consider the 40mm from the #2956233
The M64 (Takahashi) or the M60 (vixen) model could suite . But I do not have their thread pitch.
What is the thread pitch of the M64 ClickLock (Takahashi ref # 2956264) and the M60 ClickLock (Vixen, ref # 2956260) ?
We would suggest to get an M54 inverter ring custom made at a milling company. There is a company in Germany who does such things, but we don't know if they ship international: www.astroholgi.de
1.25" Click-Lock Eyepiece Adapter/Visual Back with T-2 Thread Work ?
I have the 47mm extension and the nose piece is 27mm on that one...is it the same?
You need this distance for the complete setup, including the back focus of you camera, all adapters and the length of a ClickLock, if you use it behind the reducer. The #2956220 SC / HD (2")-Clicklock (5" SC, 6" SC/HD, 8" SC/HD and 9¼" SC) has got a length of 47mm.
https://www.baader-planetarium.com/en/baader-2%22-nexstar-locking-ring..html Then remove the 2" nose pice from:
Now you´re able to thread the diagonal on the telescope fully and turn it back maybe to the up-right position and lock it. This is the most compact
way to have a fine diagonal and a ClickLock clamp is including. For the 1,25" eye pieces you´ll need a reducer like:
(Further detail: The lever hits my Celestron Focus Motor. So I have to remove the Focus Motor before I can install or remove the ClickLock. If I could temporarily remove the lever, I could fully rotate the ClampLock with the focus motor in place.)
You could "unscrew" the lever by force, but we don't recommend it.
However, you can turn the whole head part of most ClickLock clamps - like the SC-clamp 2956220 - together with the lever into a comfortable position so that it does not interfere - see below linked PDF instructions.
If it is another thread, you have to check its dimensions as described on this site:
Or you may use 37mm ClickLock Extension #2956237, which fits into the 2" eyepiece clamp of your telescope - but this is only recommended it it has got a secure clamp with a brass clamping ring and not only a simple locking screw.
I have a Nikon DSLR and that I use with and without a Focal reducer. What other Clicklock products would I need to purchase?
because the telescope requires a dedicated back focus distance to the camera. Therefore Celestron is offering a special adapter #93644 which is made of two pieces. Without reducer at f/10 the back focus length is 133,35mm, with reducer at f/7 it is 105,0mm. At last you´ll need a matching T2-Adapter for Nikon. https://www.baader-planetarium.com/en/baader-t-ring-nikon-to-t-2.html
I know it is less convenient to change accessory but for astrofotography you have to spend more attention that you´ll be successfull.
Morpheus 2" and 1,25" barrel have a length of 45mm and the clicklock adapter with thread 36,5mm, does this means the 1,25" barrel will hit the prism?
The tube does not have an external thread nor an internal thread. I think that it uses a flange-like fitting.
If you have a model that will work, which one is it?
do you have a piece that fits
I have been unable to find what size the threading is on the back end
to use any camera with a 2" nosepiece. It has got a length of 40mm. The ideal backfocus of a Schmidt-Cassegrain is about 5" (a little bit omre for the C925, see https://www.celestron.com/blogs/knowledgebase/what-are-the-optimum-back-focus-distances-for-celestron-scts
So, to use it the perfect distance, you may want to get closer to this with an extension like Baader 2" ClickLock 47 mm extension #2956247 or some other extension tubes. But you'll reach focus without the extension, too.
Celestron provides a T-adapter to SC which gives you the right distance, but it uses only the T-thread (M42x0.75) and will cause vignetting on a full-frame sensor (and is also calculated for a DSLR with 55mm flange distance.
Which T Adapter and fully pushes into ClickLock and provides the correct optical path length to use with a Nikon T Mount DSLR?
The finetuning ring works as an extender and with the stop ring you can fix the length you need. We recommend using a vernier caliper so you can
set it to the length of your demand. Please hold in mind that the 2" SC thread from OTA is 10mm long and therefore the optical length of the ClickLock
is decreasing from 47mm to 37mm.
Then you can use our M68 Clicklock #2956268. Make sure you have enough backfocus after the ClickLock. Old 17" and current 20" do not allow for the ClickLock and 2" Diagonal. You wont reach focus.
If you need NO 2" Diagonal you may need M68 Extensions. In this case we suggest our M68 Adapterset for Planewave which includes various Extensions and the Planewave Adapter.
I just bought an Explore Scientific 127ED APO FCD-1 2'' R&P focuser (https://www.bresser.de/fr/Astronomie/Telescopes/EXPLORE-SCIENTIFIC-ED-APO-127mm-f-7-5-FCD-1-Alu-2-R-P-Focuser.html)
What kind of Baader 2" ClickLock eyepiece clamps version should i take ?
take a ruler - it must be 54mm or 63mm diameter. And please take a look at this picture where you can find all data:
The M54 clamp is #2956263 the M68 is #2956269
- Tele Vue 85 mm APO Refractor
- Tele Vue NP101is Nagler-Petzval APO Refractor
- Tele Vue NP127is Nagler-Petzval APO Refractor
that the ClickLock is 36,5mm long so you have 18,5mm left to the sensor of a camera. A camera adaption can be difficult.
1. Do I leave the base ring on the SCT (it's mounted quite tight, I haven't been able to remove it with normal force), and just use the 2" threading? Or do I remove the base ring (with extra force?) and use the 2" Baader ClickLock with 3.3" clamp?
2. Do I need to compensate for the extra length of the standard setup cone? And if yes, how is this accomplised?
3. If I want to use the Celestron .7x Focal Reducer for the 800 EdgeHD, I'm assuming this goes between the SCT and the Baader ClickLock?
Appreciate your feedback. Thanks in advance!
is part of it and do not open it! Comparing the classic SCT with backfocus length around ~110mm the EdgeHD model has 133,35mm. When using
a 2" diagonal the longer optical length of it is compensating the difference. For visual use the optical lengthes are not that important, for
astrophotographie it is. Okay for visual using the 2956220 ClickLock 2"SC is fine. The 0,7reducer is preffered made to use doing astrophotography,
for visual use please take eye pieces with longer focal length. Please take a look at this item (sorry german lang. only):
which has 2.5" HEX Focuser, which 2" Clicklock Eyepiece Clamp would be appropriate?
Also which diagonal would you recommend for use to terminate with a clicklock eyepiece also. Would you suggest attaching the diagonal directly without a compression or clicklock fitting?
rings wont fit. At the moment we´re planing to supply ClickLock for the none-standart M68/M54 but it will take some time. We´d prefer to use also
a ClickLock on the focuser, otherwise you´ll need a locking ring. Depending on your requirements this diagonals surely can be a good partner:
Feather Touch Focuser. Think the tread into the focuser is M75X 1 Female Tread. Do you have a 2" ClicLock-clamp for that?
For an APS-C-camera, you can use T-2-adapters without problems and don't need a larger diameter for the adapters. So, you can use the standard T-ring, which gives you 55mm backfocus for the DSLR.
To adapt the APS-C-camera to the 8" EdgeHD with a Clicklock, we'd recommend
- 1x T-Ring Nikon to T-2 # 2408300 (55mm backfocus to the camera sensor)
- 1x Baader VariLock 29, lockable T-2 ExtensionTube 20-29mm with spanner tool, set to 28.5mm, # 2956929
- 1x Baader 2" / T-2 Nose Piece and Camera adapter # 2408150 (total length 2,5mm)
- 1x 2" Clicklock #2956220 (length 47mm, you already have this part)
This gives you a total length of 133mm without a filter.
You can screw any filter with a 2" housing into the 2" nosepiece (just like into any eyepiece). The filter will move the focus outwards by ca. 1/3 of its thickness, so a 2mm filter will move the focus about 0.7mm outwards. If you set the Varilock to 29mm, you are within the 8" EdgeHD's specified working distance of 133.35 +/-0.5mm.
A full-frame camera would require a Wide-T-Ring to make use of the full aperture; for the smallet APS-C, the T-2-combination works fine.
good for it to see if it is 54mm. Presumably it is a M54x0.75 thread as Explore Schientific/Besser/Omegon is doing and by that the ClickLock
#2956253 should be fine.
Thanks in advance, Bart.
We have described how to do it here: https://www.baader-planetarium.com/en/blog/clicklock-clamp-for-your-telescope/
Or asking a dealer who sells SkyWatcher telescopes to get the specific answer.
I own a Celestron EdgeHD 9.25 SCT with CPC mount. It comes with 2" back and 2 inch diagonal. Can I replace the back with the #2956233 SCL (3,3")-ClickLock and then interface the Baader 2" ClickLock Diagonal Mirror# 2956100 ? I don't see this combination described in your documentation. If I missed it, apologies.
This would allow me to easily rotate the diagonal if needed and would appear to keep focal length very close to original. There is no problem with zenith rotation of OTA.
Any comments on doing this are appreciated.
The regular C925 SCT doesn't have the large 3.3"-SC-thread, but the smaller 2" SC-thread like the C8. So, you need
#2956220 SC / HD (2")-Clicklock (5" SC, 6" SC/HD, 8" SC/HD and 9¼" SC)
With this, you can use any 2" accessories.
The 3.3" Clicklock only fits onto C11 and C14.
I would like to connect my Nikon D750 directly to the back of my SCT by using the Baader 2" ClickLock SC/HD (2") clamp (2956220).
What else I need to buy in order to do that?
The choice is between the larger M48 standard or the regular T-2 parts.
To minimize vignetting on the fullframe D750, we would advice going with M48.
The 8" Edge HD has a backfocus of 133,35 mm.
You can achieve this proper working distance with the following parts, starting at the telescope:
- SC / HD (2")-Clicklock (#2956220) [47 mm - 10 mm thread length = 37 mm]
- M48 extension tube 40 mm / 2" nosepiece (#2958640) [4 mm remaining]
- Fine-Adjustment ring 1 mm (gold) - Aluminium (#2457923) [1 mm]
- M48 extension tube 30 mm / 2" nosepiece (#2958630) [30 mm]
- Fine-Adjustment ring 0.5mm (red) - Aluminium (#2457922) [0,5 mm]
- M48 extension tube 5 mm (# 2958605) [5 mm]
- Fine-Adjustment ring 1 mm (gold) - Aluminium (#2457923) [1 mm]
- Reducing piece S52 / M48 (#2958552)
- Wide-T-Ring Nikon with D52i to T-2 and S52 (#2408333) [8,4 mm]
- Nikon D750 [46,5 mm]
I would like to try and figure out which clicklock item I can use with whatever combination I wish to try, but I am finding all this a bit confusing as I don't understand all the various threads etc..
Can you help me please? (I may need some diagrams to help understand)
#2956220 SC / HD-Clicklock (6", 8", 9¼" SC and EdgeHD)
For the Altair, you'd have to check the manual to be sure, we do not have the data for all telescopes. According to their website, it should offer an M54x0,75 if you remove the original eyepiece clamp. Then the
#2956254 M54-ClickLock (Skywatcher / Orion - but not for Bresser Hexafoc)
should fit. If it doesn't, Altair mentions a M54-to-M48-adapter for CCD-cameras - if youbhave this one, you can use
#2956248 M48-ClickLock (2" Filterthread)
Then you have a standard 2" eyepiece clamp and can use 2"-accessories as before, your old 1,25"-adapter (or an optional Baader 2" to 1¼" ClickLock Reducer #2956214), or for your camera the Baader 2" / T-2 Nose Piece and Camera adapter #2408150 plus T-Ring Nikon to T-2 #2408300. You may need additional T-2-extension tubes to reach focus with your refractor.
We do not have ready-made wahers, but to released stuck parts, we like to use sturdy rubber gloves which give you a better grip. Maybe they are also helpful for you.
The Baader ClickLock®-System (1¼" / 2") in an overview
Never before has an eyepiece clamp for amateur astronomy been so elaborately crafted.Heaviest tested load: complete C14 with SCL 2" ClickLock clamp and a 2" ClickLock mirror diagonal with Scopos 30mm Extreme eyepiece. Attention: not recommended for imitation!
The Baader ClickLock (1¼" / 2") is a precisely fitting, very massive eyepiece clamp without clamping screws (!). Inserted eyepieces, CCD cameras and similar accessories are securely held in place, locked against rotation and won't be scratched in any way! With a small turn of 20°, each eyepiece is firmly clamped. You will never have to handle small locking screws again – instead, just rotate the top of the eyepiece clamp for a few degrees, and the eyepiece will be firmly fixed. This is also no problem with gloves on!
Our various ClickLock clamps are made of seven precision-machined components which provide a highly effective retention mechanism that securely holds any 1¼" or 2" eyepiece. The clamp is very expensive to assemble, the price therefore initially may appear high for "nothing more than" a clamping device. But if you think about the comfort, precision and stability, it's well worth the money.
You do not have to tighten the ClickLock clamps with brutal force, because the mechanical principle comes from professional mechanical engineering. This is how the tool holder in modern CNC milling centers works. Clever use of leverage multiplies the torque. The inserted object is held on three sides similar to a quick-action chuck and can therefore no longer carry out any tilting movements.
Detailed information about the 2" ClickLock systemExample of switching a standard 2" clamp to 2" ClickLock
We have tested the effectivity and stability of the ClickLock mechanism for many years with the 1¼" ClickLock clamp.
The 2" ClickLock system is designed to be much more mechanically solid.
- Even a 20° turn with light pressure of the rotary lever is enough to hold all 2" accessories absolutely securely and firmly.
- Ratchet function – indicates the position of the clamp acoustically and haptically. So you can know if the clamp is open or closed in the dark and without looking.
- Massive tension ring – keeps even the most expensive accessories absolutely safe, without causing scratches and bruises
- The position of the rotary lever is adjustable for left-hand / right-hand use either by six camera slotted screws or by six Allen screws with a hexagonal wrench (depending on the model)
- The heaviest tested load to date is a complete C14 with an SCL-clamp and a 2" Click Lock star diagonal with a Scopos 30mm extreme eyepiece. The C14 has been lifted on the eyepiece. We emphasize that this test setup is not is recommended for imitation.
- The extensive range of ClickLock clamps makes it possible to retrofit the Baader 2" ClickLock clamp on many telescopes
With the 2" Clicklock clamp, you can also convert e.g. your 2" Maxbright mirror (or the 2" universal prism) to the Clicklock system, simply unscrew the old 2" clamp and screw on the new 2" Clicklock clamp.
Application images on 2" ClickLock clamp
|Technical Data not yet specified||Please choose product variant from dropdown above to see technical data of your chosen product|
> 400 Downloads
> 300 Downloads
> 200 Downloads
> 100 Downloads