Any reflecting telescope with classic coatings can attain a lifetime of 20 or 30 years - correct handling provided. The same accounts for our protected silver-coatings, whereas the position of a stardiagonal within the optical train does provide much better protection against environmental influences, compared to the exposed surface of a primary telescope mirror.
We do regard the benefit of the BBHS hardsilver coating to be quite noticeable, compared to the reduced spectral range offered by a dielectric coating. Please check in the Internet for statements that would verify our position. Or look for the very extensive tests on star diagonals, performed by William Paolini (see tab "Downloads".
Please read more on the properties of our star diagonals and our design philosophy here: http://www.baader-planetarium.com/en/blog/baader-bbhs-reflective-properties/
I was wondering what is the light transmission rate (99% reflectance for T-2 Maxbright Mirror) nothing indicated for the T-2 Stardiagonal (Zeiss)?
the telescope side, these will be fully illuminated. If you have 2" eyepieces with a wider aperture than 34mm
you will see that the field is vignetted.
2" Glasspathcorrector® 1,7x for Newtons # 2456300
2" Glasspathcorrector® 1,7x for Newtons incl. T-2 change ring # 2456301
The only difference between them two is the adaptation to the binoviewer. They save ca. 80mm of glass path; a binoviewer consumes ca. 110mm, so you need only ca. 30mm of additional backfocus compared to a normal eyepiece without binoviewer.
Otherwise, we'd recommend using mirrors on a mirror telescope to avoid possible colour abberations which can be caused by a prism.
Any beam of light that will hit that uncoated surface under exactly 45° of incoming angle will undergo a "total reflection" (as soon as there would be a regular antireflection coating applied onto that reflective face, the performance would suffer greately). For ages Carl Zeiss had preferred the total reflection of prisms versus the reflective surfaces of mirrors, because until recently mirrors did tend to age (produce haze) very quickly.
For the BBHS T-2 prisms we needed perfect reflection also for very short focus telescopes and we wanted to produce a prism that could be used for a wide range of purposes - also for other reflective angles than exactly 45°. In this sense the BBHS-coating applied onto the T-2 prisms offers "another league" of functionality - and the hard silver coating will keep this optical surface to stay clean for ages, whereas the open glass surface of the 32 mm prism will be prone to collect some dust or even dew over time.
Still the 32mm prism is mounted within a precision metal housing, suitable to carry the weight of the Maxbright and heavier binocular viewers asf. It offers the very shortest light path for attaching - say - a Maxbright Bino onto any telescope due to its T-threads. In this way we regard it as a very good solution for any low-cost binocular viewer, since the optical polish of the prism faces is made very precise, with the extended optical distance in mind that adds itself into the light path when putting the added mechanical length of a binoviewer between the 90° prism and the eyepiece focal plane. Regular 90° prisms often feature a plastic housing and are only made to supply sufficient optical quality for an eyepiece to be mounted directly atop such a prism face.
Conclusion: each of these two prisms (32mm as well as BBHS T-2) are top performers within their respective price range. And if you plan to ever use a Mark V Binoviewer, the T-2 BBHS prism will be the first and most useful investment for an undeteriorated viewing experience.
Read also more on Baader BBHS Reflective Properties:
- Related Articles
|Net weight (kg)||0.17|
|Optical Design||Star Diagonal Prism|
|Inner Connection (lens sided)||Thread, T-2 (M42 x 0,75)|
|Inner Connection (eyepiece/-camera-sided)||Thread, M34|
|Outer Connection (eyepiece/-camera-sided)||Thread, T-2 (M42 x 0,75)|
|Reflection surface||Sealed BBHS coating|
|Glas path||36 mm|
|AR-Coating||Phantom Coating® Group|
|Image Orientation||Erect image, Mirror inverted|
|Optical length (mm)||38,5|
|Clamping System||no clamp|
|Inner Diameter / Clear Aperture (mm)||34|