If you want to equip any 2" star diagonal with a ClickLock, you can always use
Baader 2" ClickLock 37 mm extension #2956237
Baader 2" ClickLock 47 mm extension #2956247
If you want to replace the nosepiece of a star diagonal with this nosepiece, it depends on the star diagonal. If you can remove the original nosepiece and if you can then access a female SC-thread (2" 24 GZ 60°), then you can replace one nosepiece with another - although this shouldn't make too much of a difference?
If you can remove the clamp of the star diagonal and can then see a male 2" SC thread, you can use the Baader 2" ClickLock SC/HD (2") clamp (C5" - C9¼") #2956220 to replace the original clamp.
I would like to know which product is suitable as same as a nosepiece of 2" Herschel prism #2956500?
It may be that there is a little bit of the anodized coating too thick inside of one of the threads - please take a look at the thread; if it is blocked somewhere, just take a knife and go along the thread once to clean it.
Depending on the depth of the thread of your star diagonal, it may be that you need an additional spacer, otherwise a coupling ring may rotate, although the threads fit. Unfortunately, we do not have Meade accessories here to try it out.
- Related Articles
|T-2 Part #||19|
|Inner Diameter / Clear Aperture (mm)||46|
|Outer Diameter||50,8 (2")|
|Inner Connection (lens sided)||Thread, M48|
|Outer Connection (lens sided)||Barrel, 2" (50,8mm)|
|Inner Connection (eyepiece/-camera-sided)||Thread, M48|
|Outer Connection (eyepiece/-camera-sided)||Thread, 2" (50,8mm)|
|Adaptable to||every female 2" SC-thread;6x6 T-Adapter|
|Compatible Brands||UNC, Baader Planetarium, Celestron|
|Type of Adapter||Barrel, Filter holder|