QHY 5-III-462C COMS Camers-Sets
The 5-III-462C planetary camera is available in a set with Baader FlipMirror II Star Diagnoal and Off-Axis-Guider as photo bundle + accessories or with a complete Baader Q-Turret Eyepiece Set (eyepiece revolver, 4x Classic Ortho, 1x Q-Barlow 2.25x) + accessories as planetary bundle erhältlich.
The QHY 462C is extremely versatile: With the UV/IR filter it is a very low-noise USB-3 color camera with 2.1 megapixel Sony IMX462 STARVIS sensor for planetary photography or autoguiding. The included QHY IR850 filter makes the QHY 462C a specialist for NIR photography.
Especially interesting if you are both photographing and visually on the road: With the Baader FlipMirror II Star Diagonal (#2458055, € 195,-) you can switch from eyepiece to camera in seconds, and of course it can be combined with filter sliders / wheels. The set includes the Off-Axis-Guider to use the camera as a video module for planetary photography or as an autoguider for a CCD/DSLR.
Our planetary bundle with the Baader Q-Turret Eyepiece Set (eyepiece revolver, 4x Classic Ortho, 1x Q-Barlow 2.25x) (#2957000, € 249,-) deliver outstandig sharpness and contrast, 50° field of view, sharp field-stops, parfocal, true High Transmission (HT) and Multiple-Coatings on all glass-air-surfaces. With highest comfort and (in combination with the Barlow-lens) many focal lengths with just one set of eyepieces: 2,7mm, 4,6mm, 6mm, 8mm, 14mm, 18mm, 32mm
Lowest Readout Noise, Fast frame rates (120+ FPS)
QHY5III462C uses the latest (6th Generation) 2.1 megapixel IMX462 STARVIS CMOS sensor from Sony (available in color only). The pixel size is 2.9µm making it the same size and resolution as the sensor used in the QHY5III290 camera (product is dicontinued) that has been so successfully used for planetary imaging by some of the best planetary imagers in the world. The QHY462C has a fast USB 3.0 interface.
The IMX462 sensor is back-illuminated and has new features that give it two significant advantages over other planetary cameras:
Baader Methane-Filter 1¼" (889nm, 8nm) (#2458295, € 225,-)
- the IMX462 sensor has sHGC for extremely low read noise (less than one electron) at high gain. This is ideal for stacking hundreds or thousands of short planetary images.
- it is exceptionally sensitive in the NIR. In this generation of sensor, the photodiode portion of the pixel well is deepened, allowing photons of longer wavelength to penetrate deeper into the substrate and thereby dramatically increases the sensor's sensitivity to red light and near infrared light (NIR). The RGB filters over the pixels become transparent at NIR wavelengths, so the sensor displays almost equal peak sensitivity to NIR light as it does to light in the visible spectrum.
The peak QE in the NIR around 800nm is as high or higher as the peak QE in the visible wavelengths. For planetary imagers using a methane filter that passes light around 880nm this is welcome news.
Innovative cooling concept
By including four proprietary cooling segments with a larger diameter at the end of the camera, the cooling surface of the otherwise cylindrical camera housing is significantly increased. This results in faster and higher thermal dissipation from the inner area of the camera to the outside environment.
The QHY5III462C camera will include two 1.25" screw-in filters, a UV/IR cut filter to isolate the visible wavelengths for normal RGB imaging and an IR850 filter that will cut the visible wavelengths but pass wavelengths above 850nm. Together, this yields a camera that can image in (a) visible light only, or (b) NIR light only, or (c) combined visible and NIR. Passing all the light, visible and NIR, will produce a very sensitive luminance frame (when shot through a reflector or other scope capable of focusing visible and NiR together) for producing LRGB color images.
Further detailed information can be found on the QHYCCD webpage:
If you have any further questions, please send us an email to kontakt (at) baader-planetarium.de.
|Technical Data not yet specified||Please choose product variant from dropdown above to see technical data of your chosen product|