FLI sCMOS Kepler Camera KL6060, Back Illuminated & Front Illuminated

Images uploaded by Customers

No customer Image uploads yet. Add Your Review with Images
FLI sCMOS Kepler Camera KL6060, Back Illuminated & Front Illuminated

Please choose product variant from dropdown below to see SKU number

€ 42,647.06 Price excl. German VAT tax (16%): € 36,764.71
1

  • KL6060 scientific sCMOS camera is available either a front or back Illuminated sensor, without shutter available
  • Features a high QE, low-noise with high frame-rates cooled sCMOS sensor
  • 6K x 6K with 10 micron pixels
  • With Air Cooling or Optional Liquid Cooling
  • With USB3.0 (3 Gbps) and Optional QSFP (8 Gbps) interface
  • Broadband AR Coated Window
  • Deep Cooling (up to 50°C below ambient)
  • LDR and HDR modes
  • Reaches operating temperatures in 10 minutes
  • Support for up to 35 channels

All FLI cameras can be strongly individualized. For example, the following options are possible: Choose between large or small shutter, adaptation either to the normal CFW or CL filter wheels from FLI, delivery with or without cover slit, delivery with water cooling or without, and much more. All these customizations offer such a wide range of possible options that we cannot display them on the website. Therefore, we would be pleased to advise you individually and, if required, prepare a detailed offer for you.

Important note: FLI products are not in stock and can be ordered from the manufacturer on request. Please contact us in advance by email if you would like to place an order.

* Required Fields

€ 42,647.06 Price excl. German VAT tax (16%): € 36,764.71

Product Questions

No questions yet. Be the first to ask a question about this product - it will be answered by other customers or an Admin.
Description

Details

Kepler Cooled sCMOS Cameras – KL6060

The Kepler Series from FLI is a giant step forward in throughput, providing faster digitization, higher speed interfaces, and up to 35 channel readout. Sensors currently supported include front and back illuminated sCMOS.

Kepler releases include the KL400 (also available as TVISB or UV) and KL4040 cameras, which we offer in our program. They will be followed by the very large area KL6060 camera. Each camera features a high QE, low-noise, high frame-rate cooled sCMOS sensor. The KL400 is one of the most sensitive cameras in existence (1.5 e- read noise, 95% QE). The KL4040 is a high QE front illuminated camera with a generous 52mm imaging diagonal. The Kepler KL6060 features a 38 megapixel, 87mm diagonal sensor, available with front or back illuminated sensor.

QE KL6060 Front Illuminated

The very large imaging area of the KL6060 Front illuminated scientific CMOS camera provides high sensitivity with low noise, even at multiple frames per second. The camera offers 4x the area of comparably priced 2K x 2K back illuminated CCD cameras.

The KL6060 BI scientific CMOS camera has the same sensitivity and imaging area as the back-illuminated CCD230-84 CCD, but with a fraction of the noise even at multiple frames per second.

QE KL6060 Front Illuminated

Higher Speeds

The extremely high bandwidth of Kepler’s USB 3.0 and optional QSFP (fiber) interfaces make it possible to push up speeds on sensors already supported by FLI, such asincreasing the frame rate of the KAI-29052 interline transfer CCD by a factor of 10.

More Channels

Kepler currently supports up to 35 channel readout, greatly increasing potential throughput, as well as providing support for sensors like the ON Semi KAI-47051 interline transfer CCD.

Kepler KL400 Operational Modes

The KL400's Low Dynamic Range (LDR) mode reads the image once and digitizes it to 12-bits. The user has eight gains to select from in LDR mode. Adjusting the gain affects full well size, dark current growth, and linearity.

The High Dynamic Range (HDR) mode reads the pixels twice, digitizing with different gains. (Unlike CCDs that only read the charge from each pixel once, CMOS sensors can measure the charge multiple times.) The two images are merged to create a 16 bit image with the linearity of a single image, thus allowing an HDR image to show detail in both low-count and high-count areas of an image. Because of the additional read time, the maximum HDR frame rate is half that of the LDR mode.

The Kepler camera also features a Low Dark Current (LDC) options for both LDR and HDR. When used, the LDC option minimizes dark current at the expense of reduced full well capacity. For short exposures where dark current growth is not a problem, LDC is not generally used. Standard modes (not LDC) provide the highest full well capacity and widest dynamic range. On the other hand LDC mode is very useful for imaging dim objects that require very long exposures where dark current growth can be significant.

The following may be useful in making the decision on which mode is most appropriate:

Choose LDR mode for required frame rate greater than 24 FPS (exposures <42 ms).

Choose HDR mode for a dynamic range greater than 0 – 4095 counts

Choose LDC when your exposures are sufficiently long that dark current growth uses a significant percentage of full well capacity. (Also cool sensor to lowest possible operating temp.)

Do not choose LDC for short exposures.

Futher information about the Kepler series and comparsions with other cameras can be found on the original webpage of FLI:

If you have any further questions, please send us an email to kontakt (at) baader-planetarium.de.

Please note the additional details on the Tab "Downloads"

Related Articles
Specifications

Additional Information

Technical Data not yet specifiedPlease choose product variant from dropdown above to see technical data of your chosen product
Downloads
Reviews

You may also be interested in the following product(s)

Tell us what you think about this item!

Write A Review
    Please, wait...