Baader Planetarium

The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.

More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).

Grid List

Set Descending Direction

1-20 of 487

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1.   Kameraseitig bei 15mm Verlängerung (S 70 Schwalbenschwanz)

    # 2459145

    € 92.00 Price excl. German VAT tax (19%): € 77.31
    • Baader UFC S70/5 VariLock Extension 15-20mm
    • Continuosly (stepless) adaptable UFC extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the UFC system
    • telescope-sided with S70 dovetail clamp (screws included)
    • camera-sided with S70 dovetail
    • can be adapted via the S70 dovetail to the UFC filter base #2459110 and allows adaption of telescope-sided adapters with the S70 dovetail clamp
    Learn More
  2.   Baader UFC 2" (M48) Filter Slider

    Baader UFC 2" (M48) Filter Slider

    # 2459112

    € 40.00 Price excl. German VAT tax (19%): € 33.61
    • Baader UFC 2" Filter Slider / Filter Container M48
    • suitable for cell mounted 2" (M48) filters (max. 6mm height - LPFC)
    • slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
    • Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
    • Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side
    Learn More
  3.   Baader UFC T-2 (m) Camera-Adapter (optical height: 2 mm)

    # 2459115

    € 25.00 Price excl. German VAT tax (19%): € 21.01
    • Baader UFC T-2 (m) Thread Adapter
    • telescope-sided with mounting plate for UFC-Base (screws included)
    • camera-sided with T-2 male thread
    • can be adapted via the included screws and the mounting plate to the {{block type="core/template" template="wordpress/product/shortcode-global.phtml" shortcode="[product sku=\"2459110\"]"}} and allows camera-sided adaptation of adapters/cameras with T-2 female threads
    Learn More
  4.   Teleskopseitig (RASA)

    Baader UFC S70 11" RASA Telescope-Adapter (optical height: 3 mm)

    # 2459126

    € 95.00 Price excl. German VAT tax (19%): € 79.83
    • Baader UFC S70 / 11" RASA Adapter
    • telescope-sided RASA 11"-plate
    • camera-sided with S70 dovetail
    • can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
    Learn More
  5.   Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm)

    # 2459110

    € 50.00 Price excl. German VAT tax (19%): € 42.02
    • Baader UFC Base (Filter Chamber) for 2" / 50.4 / 50x50 filter slider
    • elescope-sided with S70 dovetail receptor clamp
    • camera-sided with mounting plate for adapting UFC camera-adapters
    • The UFC-base is the foundation of our Universal-Filter-Changer system and is needed at least once as chamber for the filter sliders/containers and to adapt telescope- and camera-adapters.
    Learn More
  6.   Baader 2"/90° Astro Amici-Prism with BBHS ® coating

    Baader 2"/90° Astro Amici-Prism with BBHS ® coating

    # 2456120

    € 595.00 Price excl. German VAT tax (19%): € 500.00
    • 2" ClickLock-Clamp and 2" nosepiece.
    • Suited for astronomical observation at high magnification
    • Hard-silver-coated and protected against aging. Astro quality, manufactured by Zeiss standard
    Learn More
  7.   Baader Fringe Killer Color Correction-Filter
    From: € 82.00 Price excl. German VAT tax (19%): € 68.91
    • The fringe killer blocks defocused light in the blue spectrum, as well as in the red part of the spectrum (IR) above 700nm, usually seen in small achromat telescopes.
    • The smaller details on craters of the Moon and planetary surfaces are so much more visible!
    • Planeoptically polished; can be used well before the focal point of the optical system, without any loss of sharpness, as a single filter in front of a binocular for afocal projection with digital cameras.
    • Provides the brightest picture of all industrially manufactured colour error-correction systems. Thus, the Fringe-Killer is a must for small refractors!
    Learn More
  8.   Baader Sky Surfer V (Night & Day Design) Red-Dot-Finder

    Baader Sky Surfer V (Night & Day Design) Red-Dot-Finder

    # 2957315

    € 125.00 Price excl. German VAT tax (19%): € 105.04
    • SkySurfer V works in dual function ("day &night"), as precise solar-finder as well as a classic Red Dot Finder.
    • LED withillumination with three bright settings for daylight use and eight much dimmer for nighttime use, so that no stars will be outshone.
    • Incl. RDM Red Dot Mount #2457010 (to mount onto most Celestron, Sky-Watcher and Vixen finder base) and Baader-Standard-Base #2457000 to mount on other telescopes. The SkySurfer V unit (without the RDM mount) also fits directly onto 11 mm Weaver micro gunrails and 20 mm Weaver/Picatinny rails
    • Water resistant and completely made of black anodized metal.
    • Weight of the Red Dot Finder: without adapter to the telescope 310 g; base: 55 g
    • Long dew shields are mounted before and behind the lens to prevent fogging
    • The 1: 1 objective lens is non-reflective and darkens the sky much less than competitive seekers. Cheaper RDFs used for guns are much too bright at night and will harm your dark adaptation.
    • The spacer itself is equipped with a mini-weaver-style dovetail so that it can carry a SkySurfer III or SkySurfer V red dot finder as well
    • {{block type="core/template" template="wordpress/product/shortcode-global.phtml" shortcode="[product sku=\"2957311\"]"}} with 0.7 mm through-hole to work as solar "camera obscura" when cover is closed and {{block type="core/template" template="wordpress/product/shortcode-global.phtml" shortcode="[product sku=\"2957312\"]"}}with yellow glass cover with opaque crosshair reticle and UV/IR blocking filter are also available separately, is suitable for upgrading for an older SkySurfer V model.

    Solar Observation Safety Note

    Before pointing the telescope towards the Sun make sure that both jump covers are securely closed and snapped into place. Now the solar image is being projected onto the rear-side reticle. The position of the bright solar dot on the reticle can be seen from any sideways angle. It is not necessary and not recommended for solar work to position the eye straight behind the line of sight and to eye the solar dot from straight behind. Now center the yellow solar dot into the middle of the reticle by using the telescope mount controls. If found convenient, indicate your own center mark onto the reticle with a pencil.

    Pay utmost attention to safely cover the front aperture of your telescope (or any other optical device aiming at the Sun) with a suitable solar filter, for instance AstroSolar® film.

    Learn More
  9.   Baader Standard Base - for MQR III&IV, for Witty One & for V-Bracket

    Baader Standard Base - for MQR III&IV, for Witty One & for V-Bracket

    # 2457000

    € 28.00 Price excl. German VAT tax (19%): € 23.53
    • Standard base viewfinder mounting Pairing MQR III, IV MQR, Witty 1, SkySurfer 5 for mounting on the "second telescope"
    • The Baader standard basis is milled from solid (no cheaper casting), adjusts all Tubusradien and can be with two screws in the slots - but also with a single screw in the center - absolutely firmly attach.
    • The base plate is milled sinusoidal and forms on each tube radius 130-400 mm diameter two linear runs. This provides maximum stability
    Learn More
  10.   Baader Steel Leveling Flange with 20° tilt for GM 4000

    # 2451184

    € 640.00 Price excl. German VAT tax (19%): € 537.82
    • the Baader leveling flange with 20° tilt for GM 4000 is used to extend the adjustability of the pole height by 20°. Thus, the mount can also be used in proximity to the equator.
    • Consisting of two solid steel, separated by six steel bars
    • Top plate precision milled flat and threaded to fit the base plate.
    • Height 100 until 151 mm
    • Suitable as a pillar adapter flange to the Baader conical steel pillar #2451220
    Learn More
  11.   Sony E/NEX T-Ring Lieferumfang

    # 2458229

    € 45.00 Price excl. German VAT tax (19%): € 37.82
    • Reducing piece: M68a to M48a for direct connection of M48 accessories to the M68 system
    • Changes the M68 (Zeiss) female into a M48 male thread
    • Telescope side M68 male thread, eyepiece side M48 male thread
    • Optical length: 5 mm
    • Inner diameter: 45 mm, outer diameter: 76 mm
    Learn More
  12.   Baader M68/S68 Changer to fit Zeiss adapter system (dovetail clamp only)

    # 2458180

    € 165.00 Price excl. German VAT tax (19%): € 138.66
    • M68 / S68 Zeiss changer
    • Serves as a highly reliable quick coupling and rotating device
    • For use with Baader Solar Spectrum H-alpha filters and long distance projection in use with the Baader FFC (Flat Field fluorite Converter)
    Learn More
  13.   Reducing ring M48a / T-2a

    # 2958554

    € 23.00 Price excl. German VAT tax (19%): € 19.33
    • Changer / Reducing Ring M48 to T-2 with M48 male thread
    • Changes the M48 female thread of a adapter into a T-2 male thread
    • Can be used to combine T-Rings with M48 male  threads with accessories with T-2 male thread
    • Made of hardened, stainless steel
    • This conversion ring is also part of {{block type="core/template" template="wordpress/product/shortcode-global.phtml" shortcode="[product sku=\"2458055\"]"}} 
    Learn More
  14.   Baader M68 - 6x6 T-Adapter with V-Groove

    # 2458215

    € 42.00 Price excl. German VAT tax (19%): € 35.29
    • To mount #24580-35/-36 DSLR T-Rings with 2 Filter compartment onto Zeiss M68 System
    • Medium Format T-adapter M68
    • Adapter for System M68 (Zeiss)
    • M68 - 6x6 T adapter V-mount dovetail
    Learn More
  15.   Baader CCD Complete Filterset I (L-RGB-C / H-alpha 7nm)
    From: € 456.00 Price excl. German VAT tax (19%): € 383.19
    • consisting of 6 Filter
    • 3 mm glass thickness
    • non-ageing sealed coating edges
    Learn More
  16.   DADOS: Baader Blaze Reflection Gratings 1200 L/mm

    DADOS: Baader Blaze Reflection Gratings 1200 L/mm

    # 2458559

    € 285.00 Price excl. German VAT tax (19%): € 239.50
    • Blaze Reflection Gratings 1200 L/mm
    • cemented onto Tilting grating holder
    • Please note: Each DADOS spectroscopic grating (especially the 1200 line grating) needs to be precisely calibrated individually for each DADOS-spectrograph. If you order a DADOS together with another of our reflection gratings, this service will be done by us before shipping your order. If you already own a DADOS, we must ask you to return your DADOS each time when you order another grating, apart from the standard 200 line grating. Gratings can be exchanged by yourself later on, if you choose to change the grating resolution. But the initial calibration of the grating in relation to the mechanical body of the DADOS must be one here one time.
      You will only pay for the cost of the grating and the transportation. We will do the calibration work free of charge for the Baader 900 and 1200 line gratings. Please announce your order planning well in advance so that we can plan it in production and provide a comfortable time slot.
    Learn More
  17.   Baader UBVRI Photometric Johnson/Bessel U-Filter (4mm Glass)
    € 394.00 Price excl. German VAT tax (19%): € 331.09
    • 50x50 mm Baader UBVRI - U-Filter
    • Photometric Johnson/Bessel filter system
    • partial dielectric design with BBAR minimized reflections
    • Planeoptically polished, 4mm glass thickness
    • non-ageing sealed coating edges
    Learn More
  18.   SolarSpectrum 0.7x Telecompressor 2"

    # 2459259

    € 275.00 Price excl. German VAT tax (19%): € 231.09
    • gets mounted eyepiece-sided directly onto the SolarSpectrum filter and reduces the previously by the telecentric system extended focal length again by a factor of 0.7
    • Working distance: 110mm (Distance to the camera sensor)
    • 2" male threads on both sides, fitting Universal Flange Adapter #2958240 (included with SolarSpectrum H-alpha filters
    • Telecompressor is used to adjust the focal length to possibly poor seeing conditions and / or enlarging the field for photographic- or webcam applications
    Learn More
  19.   DADOS 10mm Guiding Eyepiece

    DADOS 10mm Guiding Eyepiece

    # 1304110

    € 30.00 Price excl. German VAT tax (19%): € 25.21
    • DADOS 1¼" Guiding Eyepiece, Kellner 10mm
    Learn More
  20.   3kg counterweight Ø 30mm stainless steel (V2A)

    # 2951403

    € 85.00 Price excl. German VAT tax (19%): € 71.43
    • made of V2A stainless steel
    • Ø 140x30mm, bore Ø 28,7mm
    • 3 kg
    Learn More

Grid List

Set Descending Direction

1-20 of 487

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5