Baader Planetarium

• Baader M68a x 1 to FLI adapter flange
• telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 System
• camera-sided with Flange to connect FLI-ML and FLI-PL cameras
• Optische height: 10,5 mm, Inner diameter (clear aperture): 64 mm

• suitable for Paramount MX mounts
• suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
• Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition

• Ultra short 1¼" eyepiece-clamp (w. brass locking ring)
• Optical length: 20mm
• Optimized for guiding camera, w. three set screws for utmost stability and for centering of undersized camera-nosepieces
• adapts onto male T-2 thread
• First introduced as part of our Vario Finder 10x60 – long avaited individual part within the Baader Astro T-2 family of adapters

• Baader T-Ring for compact cameras with Micro 4/3 on the Astro T-2 system
• Allows the connection of T-2 lenses with 55mm back focus
• The built in 19mm extension can be removed
• Without extension compact cameras with a short adapter are only 36mm from the T-2 thread

• Baader Diamond Steeltrack (BDS-RT) for Refractors with 80 mm focus travel
• Minimum height (as supplied – incl. 2" clamp): 78 mm
• Minimum height (with optional S58 to M68 / M68i / M48 / T-2 direct-adapter): 65 mm
• Minimum height (with optional S58 ClickLock clamp): 89 mm
• Focuser weight (as supplied – incl. 2" Klemme): 1.160 g (40.9 oz)
• Adapters available or under development to fit a wide variety of refractor telescopes

Review on Stargazerslounge.com

• 1" (25.4mm) C mount, coupled with swivel T-2 Photo thread with integrated filter mount
• With integrated 1¼" filter mount - M28.5
• Comes with built-in UV / IR filter

• to connect onto Vixen Refractors with M88x1 inner threads
• only suitable for BDS-RT Diamond Steeltrack® for Refractors

• Fixed focal length of 31mm Hyperion Aspheric 2" Eyepiece, 72° extreme widefield for large field of view
• High quality Phantom Group Coating for maximum contrast
• DSLR camera adaptable as projection eyepiece, with system thread SP 54

• Astro T-2 System spacer (Fine-Adjustment) rings, available in thickness 0,3mm (black), 0,5mm (red), 1mm (gold)
• Very thin ring for finetuning in T-2 eyepiece projection
• Rings with T-2 inner diameter without threads
• Fits between all T-2 threads, equals approx. 2/5 (0,3mm), 2/3 (0,5mm) respectively 1 1/3 (1mm) turn of rotation. Rotation may differ slightly.
• Prevents binding between two T-2 threaded parts

• Comet filter for the two brightest C2 emission lines at 511 and 514nm (called "Swan-Band") in the gas tail and gasplume of comets, respectively
• Blocks the adjacent OIII line, which does not predominantly occur in the tail of comets
• CMOS optimized for increased contrast
• Front-Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around

• 3D-printed ring-wrench for Baader clamping knobs, replaces the need to mechanical lock with a hexagon key and allows easy opening and tight closing of the clamping knobs
• Suitable for all current Baader Clamps with 20mm knurled knobs:
• Baader PAN-EQ-Clamp V190 (EQ Standard) (#2451525 , € 219,-)
• Baader Pan 3 "/ EQ Dual clamp 230mm (for Losmandy and Vixen-standard) (#2451566 , € 260,-)
• Baader Pan 3 "/ EQ Dual clamp 370mm (for Losmandy and Vixen-standard) (#2451565 , € 315,-)
• Baader V-Dove Tail Clamp, Diam. 70mm, with one clamp screw (#2451530 , € 48,-)
• Baader Stronghold Tangent Assembly (various versions available)

• Fifth edition of the former Carl Zeiss giant binocular with 30 mm prisms - our most elaborate binocular
• With recalculated 7-layer dereflective multi-coatings on all air-glass surfaces
• High performance beam-splitter with dielectric splitter layer
• Including 2x Baader ClickLock Eyepiece Clamp 1¼" with built in diopter-adjustment (T-2 part #08) (#2458100 , € 87,-) , 1x Baader Heavy Duty T-2 QuickChanger (T-2 part #06A) (#2456313A , € 80,-) and 1x Mark V Bino storage-case (#2456415 , € 61,-)

• 3D-printed filter holder for unmounted Ø 36 x 2 mm Baader filters
• Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
• The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
• With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
• Also available as set containing of four 36 mm filter holders: 4x filter holder 36 mm for Baader FCCT (3D-printed) (#2459098 , € 134,-)

• DT Adapter III, M68a / SP54a extension adapter M68
• Digital T Adapter System III of M68_a on SP54_a Shortest adaptation for Telecentric system or the fluoride Flatfield Converter (FFC).
• This adapter fits to the M68 (Zeiss) ring system - see at FFC (fluorite Barlow) -. Eg to a DSLR camera using the digital T-rings to mount the FFC as short as possible.

• Fits C8/9/11" OTAs onto Zeiss/Astro Physics clamps
• Length = 470mm, with 40mm wider contact surface for the attachment of any pipe clamps Suitable for Astrophysics and Zeiss clamps
• Weight: approx 630g

• Only available in connection with the DADOS slit spektrograph
• with 220V cable and 2“ sliding cap
• Please note below information on the calbration lamp brightness level

• Reducing piece: M68a to M54a for direct connection of M54 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
• Converts the M68 (Zeiss) female into a M54 male thread
• Telescope side M68 male thread, eyepiece side M54male thread
• Optical length: 5 mm
• Inner diameter: 51 mm, outer diameter: 76 mm

• Converts 2" female into 2" male thread
• Internal M48 Filter thread for 2" filter
• Can be used to connect Baader Hyperion Mark III Zoom directly to a Baader Star Diagnol gaining adfitional backfocus by swapping ClickLock-clamp for this adaptor.

• V-Dovetail for Celestron RASA 8" optical tube, length = 495mm
• Aluminium body provides a sturdy platform for accessories
• Connects on the top of the Rowe-Ackermann Schmidt Astrograph 8" to attach accessories to the optical tube
• Installs easily into the existing holes of the RASA 8" and is fastened with the screws that are included in the delivery of the RASA 8"