Baader Planetarium

Successor model for GM 4000:
Stabilized Poser-Supply for10Micron GM 2000 / GM 3000 and 4000

The new control of the mounts is again significantly revised and stabilized, which allows us to become more efficient on the power supply side as well.

The Baader OTP 600W is no longer produced and therefore replaced by the Stabilized Power-Supply for GM 2000 / GM 3000 and GM 4000 (#1452070 , € 230,-)

• Baader SLOAN-ugriz' Bandpass Filter Set, suitable from f/15 to f/1.8
• SLOAN/SDSS (ugriz’) photometric filters with transmission according to SLOAN-specification
• Manufactured with most advanced ion beam coating technology / Daylight-Proof
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Equally suitable for modern CMOS cameras as well as for older CCD camera technologies

• Baader M55a / M68a (Zeiss) adapter for all Baader 2" mirror and prism star diagonals, for direct connection to the M68 Zeiss thread
• With this adapter you can convert your Baader 2" Diagonal on both sides to M68 thread connection. To do so, remove the 2" nosepiece or ClickLock^® and the M55/2"/S58 ring from the housing of the star diagonal and screw in the M55/M68 Adaper instead.
• To remove the black 2 "SC / S58 threaded ring from the housing and expose the M55 thread, you will need the Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-)
• Suitable for the following 2" mirrors/prisms (already included in the delivery of Baader 2" ClickLock Diagonal Mirror M68 thread (Zeiss) (#2956100Z , € 309,-) ):
  • Baader 2" ClickLock Diagonal Mirror (#2956100 , € 296,-)
  • Baader 2" BBHS ® Mirror Diagonal with 2" ClickLock Clamp (#2456115 , € 479,-)
  • Baader 2" BBHS ® Prism Star Diagonal Prism with 2" ClickLock Clamp (#2456117 , € 505,-)

• Additional Protective-Disconnect Elbowed Plug, for OTP #2457630
• 1x included in 60W OTP scope of supply
• Plud dimensions 2,1 x 5,5 mm, fits also e.g. for the Celestron LiFePO4 PowerTanks

NEW VERSION: Baader OMS-Nano – Remote Switch for 10Micron Mounts

The Remote Switch Module is not produced anymore. Therefore, we have redesigned the Remote Switch and manufactured it with a new look and name. The Remote Switch is now part of our OMS (Observatory Management System). 

More details about the Baader OMS-Nano – Remote Switch for 10Micron Mounts

• DADOS 1¼" Guiding Eyepiece, Kellner 10mm

• to change M68 female into 2inch UNFi female thread
• Telescope-side M68 outer thread, eyepiece-sided 2" UNFI inner thread

• Baader Wide-T-Ring to connect Fuji X cameras on the Astro T-2 system
• All Baader Wide-T-rings have an S52 dovetail in addition to the inserted T-2 ring to use adapters to M48, M68 or the UFC filter changer
• Ultra-short Backfocus of only 26 mm (17.7 mm camera, 8.3 mm Wide-T-ring)
• Furthermore, the illumination of the camera chips improved significantly, mainly because of the larger clear aperture.
• On the camera side: Fuji X Bayonet
• Telescope side: S52 dovetail clamp incl. S52/T-2 internal thread with 0.75mm pitch

• drying agent 125ccm
• environmentally friendly coloured indicator
• re-usable as often as you like
• protects optics from humidity

• Baader UFC S70 / C11/C9.25 Hyperstar, SC, HD Adapter
• telescope-sided C11/C9.25 Hyperstar, SC and EdgeHD Adapter
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
• Please note the below description on Hyperstar Adaptation

• Safe for solar observation and photography with all high-end telescopes and extreme tele-lenses. Suitable for highest magnifications and detailed observation of individual sunspots
• AstroSolar Safety Film OD 5.0, mounted stress free in temperature compensated cell
• No astigmatism during winter observation or with temperature changes in summer
• Scope of supply: ASTF Filter with apertures from 80 to 180mm (200 – 280mm not yet available) come with two sets of centering bolts in 38mm length. 3 bolts with 10mm diameter and 3 bolts with 20mm diameter, adjustable to the tube diameter of your telescope or dew cap. In addition three safety straps with glue-pads and three rubber plugs to cover the holes that are not used, mounting instructions.

• Allows quick changing of accessories such as Cameras, Spotting Scopes, Binoculars or small telescopes on the Astro & Nature tripod
1x included in Astro & Nature tripod scope of supply

• Baader UFC S70/5 Extension 40mm
• telescope-sided with S70 dovetail clamp (screws included)
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 and allows adaption of telescope-sided adapters with the S70 dovetail clamp

• Baader Premium grade impermeable RGB-C Clearglass Filters.
• The Baader clear glass filters are used to focus a camera when using very narrow band line filters (due to same mechanical thickness).
• Alternative function: e.g. our Protective Canon EOS T-Ring uses a clear glass filter for dust protection
• NO halos, NO reflections, NO ghosting
• non-ageing sealed coating edges

Please note: We have not planned to produce also a CMOS-optimized version of this clear filter because there is no necessity to do so. Our 7-layer BBAR(BroadBandAntiReflection) -coatings on both sides of the glass-substrate cannot be essentially improved.

• Varta V675HP 6 pieces
• Fits only the old, silver-colored lighting unit.

• Baader M55a/M68i Adapter - converts a M55 female thread into a M68 female thread
• suitable for all Baader 2" mirrors (# 2456115, 2456117, 2456100) or prisms with female M55 thread (#2456120)
• for largest aperture with 2" star diagonals and makes the adaptation of a M68 quick changer behind the star diagonal possible

• C-Mount to Canon EOS Adapter Baader C-mount adapter for DSLR camera lenses
• To connect DSLR camera lenses or DMK video modules

• STRONGHOLD was developed, to safely and precisely hold accessories, from small finder over guiding scopes up to heave tele-lenses on your main telescope
• Loading capacity: max. 7kg for imaging
• Mounting options (top): 1/4" photo thread, 6pc. M6 threads
• Mounting options (base plate): 1/4" and 3/8" photo threads, 4pc. M6 and 4pc. M5 threads

• Baader USB / RS-232 converter cable (similar to Celestron Item Nr.18775), however, made in Germany
• To connect a device with RS 232 interface to the USB port of a laptop
• Required drivers for Windows, Mac and Linux can be found under the "Downloads" tab