Baader Planetarium

The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.

More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).

Grid List

Set Descending Direction

1-20 of 473

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1.   Baader UFC Base (Filter Chamber) telescope-sided S70 dovetail receptor (optical height: 13 mm)

    # 2459110

    € 48.74 Price excl. German VAT tax (16%): € 42.02
    • Baader UFC Base (Filter Chamber) for 2" / 50.4 / 50x50 filter slider
    • elescope-sided with S70 dovetail receptor clamp
    • camera-sided with mounting plate for adapting UFC camera-adapters
    • The UFC-base is the foundation of our Universal-Filter-Changer system and is needed at least once as chamber for the filter sliders/containers and to adapt telescope- and camera-adapters.
    Learn More
  2.   Kameraseitig bei 15mm Verlängerung (S 70 Schwalbenschwanz)

    # 2459145

    € 89.68 Price excl. German VAT tax (16%): € 77.31
    • Baader UFC S70/5 VariLock Extension 15-20mm
    • Continuosly (stepless) adaptable UFC extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the UFC system
    • telescope-sided with S70 dovetail clamp (screws included)
    • camera-sided with S70 dovetail
    • can be adapted via the S70 dovetail to the UFC filter base #2459110 and allows adaption of telescope-sided adapters with the S70 dovetail clamp
    Learn More
  3.   Baader UFC 2" (M48) Filter Slider

    # 2459112

    € 38.99 Price excl. German VAT tax (16%): € 33.61
    • Baader UFC 2" Filter Slider / Filter Container M48
    • suitable for cell mounted 2" (M48) filters
    • slides into the UFC filter base and allows fast exchange between filters while still holding every filter safe and firm
    • Just one "click" onto the brass-pin releases the filter holder from the magnetic fixture. Afterwards it can be removed easily
    • Included: spacer ring to prevent that some 2" filters can be threaded in too deep and protrude on the other side
    Learn More
  4.   Baader UFC T-2 (m) Camera-Adapter (optical height: 2 mm)

    # 2459115

    € 24.37 Price excl. German VAT tax (16%): € 21.01
    • Baader UFC T-2-Thread Adapter
    • telescope-sided with mounting plate for UFC-Base (screws included)
    • camera-sided with T-2 (m) outer thread
    • can be adapted via the included screws and the mounting plate to the UFC filter base #2459110 and allows camera-sided adaptation of adapters/cameras with T-2 inner threads
    Learn More
  5.   Teleskopseitig (RASA)

    Baader UFC S70 11" RASA Telescope-Adapter (optical height: 3 mm)

    # 2459126

    € 92.60 Price excl. German VAT tax (16%): € 79.83
    • Baader UFC S70 / 11" RASA Adapter
    • telescope-sided RASA 11"-plate
    • camera-sided with S70 dovetail
    • can be adapted via the S70 dovetail to the UFC filter base #2459110 as well as to UFC extensions
    Learn More
  6.   Baader T-Ring Pentax K to T-2

    # 2408302

    € 21.45 Price excl. German VAT tax (16%): € 18.49
    • Baader T-Ring to connect Pentax-K DSLR cameras on the Astro T-2 system
    • Represents the standard exact distance of 55.0mm from the front support surface of the T-ring to the image plane of the camera body forth
    • On the camera side: Pentax K bayonet
    • Telescope side: T-2 internal thread with 0.75mm pitch
    Learn More
  7.   Baader Pan 3 "/ EQ Dual clamp 230mm (for Losmandy and Vixen-standard)

    Baader Pan 3 "/ EQ Dual clamp 230mm (for Losmandy and Vixen-standard)

    # 2451566

    € 219.33 Price excl. German VAT tax (16%): € 189.08
    • Clamps all 3" (Losmandy) and EQ- (Vixen/Celestron/Skywatcher) dovetails - minimum dovetail length 190mm
    • It is equipped with all the known fastening holes to be screwed on all mounts and all clamps of the known brand manufacturers.
    • Length: 230mm, Max. Width: 153mm Weight: 1150g
    • Optimised shape for as many contact points of the dovetail rail - thus a perfect grip
    • 3D-printed ring wrench for Baader clamping knobs #2450071 is recommended
    Learn More
  8.   Baader Tripod Adapter for Paramount MX Mounts

    # 2451120

    € 180.33 Price excl. German VAT tax (16%): € 155.46
    • suitable for Paramount MX mounts
    • suitable for the Baader T-Pod Aluminium Tripod 75–110cm and 95–130cm and Baader Hardwood Tripo
    • Attention: for adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed in addition
    Learn More
  9.   2"a / T-2i Zero-length reducing piece (zero optical length)

    # 2454833

    € 24.37 Price excl. German VAT tax (16%): € 21.01
    • converts any 2" (SC) female thread into a T-2 (M42 x 0.75) female thread - without extending the optical length
    • initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic T-2 thread (see animation on the right)
    • this adapter can also work as an expansion ring to convert a photographic T-thread into a male 2" SC thread
    • suitable for adaptation of any accessory with male T-2 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
    • Adapter with continuous 2" male and T-2 female thread as well as two face holes (recommended mounting accessory: adjustable pin-type face wrench #2450062)
    Learn More
  10.   3" focuser Hyperion for refractors, 130mm focus travel

    # 2454550

    € 755.46 Price excl. German VAT tax (16%): € 651.26
    • Professional focuser for refractors with 130mm focus travel for highest loads
    • Titanium oxide hard-coating, very hard sliding surfaces with 5my fits, 1:10 reduction gearing
    • Scale with luminous engraving, vernier with 1/10mm reading accuracy (5/100 estimated)
    • Non-reflecting inner tube with 5 mm deep baffle and 76 mm free aperture
    Learn More
  11.   Baader Classic W Rubber Eyecap with folding wing

    # 2454652

    € 7.31 Price excl. German VAT tax (16%): € 6.30
    • Classic eyecup with foldable lens hood
    • Standard form (for barrel diameter ~32mm with 1mm clear cut)
    Learn More
  12.   20kg counterweight for AP 3600 stainless steel (V2A)

    # 2951420A

    € 307.06 Price excl. German VAT tax (16%): € 264.71
    • made of V2A stainless steel
    • for axis diameter of 63.5 mm – made for Astro Physics El Capitan 3600
    • 20kg
    Learn More
  13.   Baader T-2 Stardiagonal (Zeiss) Prism with BBHS ® coating (T-2 part #01B)

    Baader T-2 Stardiagonal (Zeiss) Prism with BBHS ® coating (T-2 part #01B)

    # 2456095

    € 209.58 Price excl. German VAT tax (16%): € 180.67
    • T-2/90 ° diagonal prism (BaK4 glass) with 35mm free aperture terminal objective side: 2 "or 1¼"
    • Connection eyepiece: 1¼ "
    • Prism made in accordance to Zeiss-norms, multi-coated, solid metal case, both sides T-2 connection threads, resulting in extremely short design and adaptable to each telescope system.
    • Not just the housing is significantly better and the prism is greater, also the planarity and the conformality of the prism faces are about 5x better than standard prisms in plastic housings.
    Learn More
  14.   ADPS - Afocal Digital Projection System ( I - VII )
    From: € 47.77 Price excl. German VAT tax (16%): € 41.18
    • ADPS – Afocal Digital Projection System ( I - VII )
    • Delivery without projection eyepiece
    • For digital imaging with cameras and/or camcorders
    • Consist of base version ADPS (single parts see ADPS IV) and additional lens sided adapters on other ADPS versions
    Learn More
  15.   RCC I, Rowe Coma Corrector

    # 2956800

    € 164.74 Price excl. German VAT tax (16%): € 142.02
    • The RCC I (Rowe Coma Corrector) is a Coma Corrector from Dave Rowe with Triplet Lense design for f/4 Newtons
    • The RCC works from f/3.5 to f/6 - it is perfect on f/4
    • Coma Corrector with backfocus 91,5mm
    • reproduction scale is 1:1 - in contrast to many other coma correctors, the RCC is no Barlow lens which rely on a magnification to make the larger back-focus to the sensor possible
    • The RCC is the only coma corrector which gives you enough back-focus for filter wheels or other accessories without changing the focal ratio
    Learn More
  16.   Baader Extension / Spacertube 1¼"

    # 2456325

    € 28.27 Price excl. German VAT tax (16%): € 24.37
    • To adapt long focal length eyepieces (30-42mm) onto Maxbright Bino-Viewer
    • 2 pieces required for Baader Maxbright Bino-Viewer
    Learn More
  17.   Protective-Disconnect Elbowed plug for 60W OTP

    # 2457634

    € 3.41 Price excl. German VAT tax (16%): € 2.94
    • Additional Protective-Disconnect Elbowed Plug, for OTP #2457630
    • 1x included in 60W OTP scope of supply
    • Plud dimensions 2,1 x 5,5 mm, fits also e.g. for the Celestron LiFePO4 PowerTanks
    Learn More
  18.   Baader Variable locking T-2 extension (12-16mm) incl. lock ring (T-2 part #33)

    T-2 Part #: 33

    Baader Variable locking T-2 extension (12-16mm) incl. lock ring (T-2 part #33)

    # 2958130

    € 38.01 Price excl. German VAT tax (16%): € 32.77
    • Consists of 3 parts: #26/#34/#35
    • Converts a T-2 external thread in a T-2 internal thread, and a T-2 internal thread in a T-2 external thread
    • With T-2 counter ring - a digital camera can be locked in any rotational position. Acts as a normal T-2 extension ring with 12mm (or 10mm) length
    • Together with the rings (T-2 component # 25A - 15mm) / # 25B - 40mm) / # 25C - 7.5mm) can be almost) realized (any required length accurately and torsion.
    Learn More
  19.   Baader 1¼" / T-2 Eyepiece Holder

    # 2458120

    € 15.60 Price excl. German VAT tax (16%): € 13.45
    • Eyepiece 1¼ "/ T-2 internal thread priced version with M 4 screw (alternatively: T-2 component # 08A)
    • 1 M4 clamp screw
    • Telescope side with T-2 internal thread
    • For 1¼" eyepieces or connecters
    Learn More
  20.   Baader Metal M68 Dustcap with M68 x 1 female thread

    # 2458248

    € 33.63 Price excl. German VAT tax (16%): € 28.99
    • Dustcap with M68 x 1 female (inner) thread
    • Robust cap made of black anodized metal
    • Dustproof closure for your accessories of the Baader / Zeiss M68 system
    Learn More

Grid List

Set Descending Direction

1-20 of 473

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5