Baader Planetarium

• #2451553 300mm counterweight-shaft M14, for leveling counterweights Ø 16mm
• For fine adjustment of telescope systems and when changing from camera to eyepiece
• Incl. end screw
• available in 150mm and 300mm length

• Scope of Supply of SkySurfer III includes the widest selection of individual adapters to mount the unit directly onto binoculars and beside spotting scopes as well as any telescope brand. The new double length housing makes it suitable for rough solar alignment by aligning the shadow, cast by the tube shaped housing.
• SkySurfer III red dot sights - Adjustable LED visor viewfinder
• Much easier to use than the popular Celestron and Skywatcher "Red Dot finders". Clear aperture is 30mm rather than 20mm
• Long dew shields are mounted before and behind the lens to prevent fogging
• The 1: 1 objective lens is non-reflective and darkens the sky much lower than competitive viewfinders
• Mounts directly onto Weaver & Picatinny standard rails

• Colour Filter Set with 6 colours for contrast enhancement of lunar and planetary observations.
• Largest free opening of all the colour filters on the market which eliminates any vignetting.
• Double 7-layer anti-reflection coating with only 0.25% residual reflection per surface (Phantom Group Coating) resulting in no reflections, scatter or dimming.
• Planeoptically polished for sharp image at high magnification.
• Included Filters: Dark Blue Filter, Light Blue Filter, Green Filter, Yellow Filter, Orange Filter and Red Filter
• Non-ageing sealed coating

• 1¼ "/ T-2 eyepiece with fine focus (5mm focus travel)
• With three eyepiece clamping screws for fine centering - as well as rotation locking screw to secure the exact focus position
• Telescope side with T-2 internal thread
• For 1¼" eyepieces or connecters

• Holder to attach the Steeldrive II Controller to a 3" Dovetail
• Suitable for all 3" (Losmandy standard) dovetail clamps
• The controller is inserted into the holder and can be quickly removed for manual operation.
• The holder helps to lay cables cleanly for remote setup

Please note: The course is held in german language only

• 12 Kapitel als Webseite und druckbare PDFs (über 130 Seiten) zum Download, verteilt über drei Monate
• Behandelt Grundlagen der Astronomie, der Himmelsbeobachtung sowie der Auswahl und Bedienung von Teleskopen und Zubehör
• Freie Zeiteinteilung dank Mailingliste
• Betreuung durch den erfahrenen Amateurastronom und Autor Alexander Kerste
• Geld-zurück-Garantie: Auch bei Bezahlung per Vorkasse erhalten Sie die Teilnahmegebühr zurück, wenn Sie innerhalb der ersten zwei Wochen aussteigen. Die Frist beginnt erst mit Kursbeginn und nicht mit dem Anmeldedatum!

Der nächste Einsteigerkurs findet vom 4. September bis 4. Dezember 2022 statt. Die Anmeldefrist endet nach dem Schnupperzeitraum am 18. September 2022. Es gelten spezielle Allgemeinen Geschäftsbedingungen und die Widerrufsbelehrung für den Einsteigerkurs.

• Dustcap with T-2 (M42 x 0,75) female (inner) thread
• Robust cap made of black, high-quality plastic
• Dustproof closure for your accessories of the Astro T-2 system

• Safe solar observation with all types of binoculars / safe solar photography with all camera lenses
• AstroSolar Safety Film OD 5.0, mounted stress free in high-cality cell
• One side of filter cell shortened for use with binoculars. Two filters are mandatory for binocular observation, mentioned price is for one piece only
• Scope of supply: ASBF Filter (Apertures 50 to 100mm) come with three centering bolts of 13mm diameter and 24 mm height, adjustable to the tube diameter of your binocular. In addition three safety straps with glue-pads and mounting instructions

• BHP levelling flanges are used to adjust the unevenness of the foundation or the concrete pillar as well as other deviations of the substructure from the perfect north-south alignment. They adjust these imperfections as close as possible to the mount, very precisely and steady, without reducing the stability of the pillar
• Consisting of two solid Steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• suitable as a pillar adapter flange to the Baader conical steel pillar [product sku="BHP2451220
• Overall height: 100 mm
• The steel pillar flange Steel pillar flange for GM 3000 mount (#1453090 , € 275,-) is needed

• Projection dome for the Baader Planetarium, sizes 2.5m and 3.5m diameter
• Geometrically correc half-globe, consiting of 8 segments of each 45° made of fiberglass reinforced polyester.
• Inner color matte white, outer color grey

• ADPS – Afocal Digital Projection System ( I - VII )
• Delivery without projection eyepiece
• For digital imaging with cameras and/or camcorders
• Consist of base version ADPS (single parts see ADPS IV) and additional lens sided adapters on other ADPS versions

• the BHPlevelling flange with 20° tilt for GM 4000 is used to extend the adjustability of the pole height by 20°. Thus, the mount can also be used in proximity to the equator.
• Consisting of two solid steel, separated by six steel bars
• Top plate precision milled flat and threaded to fit the base plate.
• Height 100 until 151 mm
• Suitable as a pillar adapter flange to the Baader Heavy Pillar (BHP), modal steel pillar with up to 600 kg payload capacity (available in 60 - 165 cm) (various versions available)

• Glasfaserleitung vom BACHES Echelle Spektrograf zur RCU (Remote Control Unit)
• Also includes the control cable in the same respective length
• Available in 3, 15 and 30 Meter length

• Guidescope rings BPIII (2 pc)
• With 6 large handknobs with screw and ball bearing tips
• For tube diameter 140 - 185mm

• Baader UFC S70/5 VariLock Extension 15-20mm
• Continuosly (stepless) adaptable UFC extension with millimeter scale for fine-tuning of the optical height between 15 and 20mm in the UFC system
• telescope-sided with S70 dovetail clamp (screws included)
• camera-sided with S70 dovetail
• can be adapted via the S70 dovetail to the UFC filter base #2459110 and allows adaption of telescope-sided adapters with the S70 dovetail clamp

• BACHES: Thermal Insulation Housing
• The CNC milled two-piece housing, protects the spectrograph from fluctuations in the outside temperature at the telescope
• Very good thermal insulation is achieved by 20mm wall thickness of weather-resistant EPS rigid foam
Learn More

• Laser-Collimator for easy collimation of your telescope in 1-2 minutes
• High-quality, impact-resistant and highly accurate laser, with concealed setscrews
• Precision-machined, hard-anodized barrel instead of the less accurate 1¼" chrome barrel
• Handle protector made of silicone rubber facilitates handling with gloves
• Suitable for Newton and SC telescopes, instructions included

• 2" to 1¼" reducing piece with Bronze pressure ring and 8,5mm optical height
• Suitable for 2" focusers and clamps (e.g..: RT / SC Diamond Steeltrack or ClickLock 2" Mirror Diagonal)
• Includes clamp screw, safety nut and 2" filter holder (M48 inner thread)