Product Questions and Answers
- Related Articles
-
Related Articles
-
February 6, 2017Why choose UFC Quickchange-Frontfilters with DSLR-Cameras?
Info about using quickchange-frontfilters with the UFC in combination with DSLR-cameras There are no monochrome DSLR-cameras on the market, so a filter holder (e.g. the Baader-UFC) may seem quite useless... -
December 19, 2019HALOS – viewed without prejudice
The moment you insert any type of filter into the optical setup, which consists of your specific camera, the appropriate flattener/reducer or coma corrector and the telescope, the filter becomes... -
November 30, 2016Baader-UFC (Universal Filter Changer) – the ever-growing...
Overview of the Baader UFC-System The Baader Universal Filter Changer (or UFC for short) is a very versatile simple system for using, mounting and changing (or swapping) filters in and... -
May 3, 2019Baader Universal Filter Changer (UFC): The UFC...
The main component fo the Baader UFC system: In the first part of this series of blogs about the Baader Universal Filter Changer (UFC), we gave a general introductory overview... -
May 10, 2019Baader Universal Filter Changer (UFC): The UFC...
The main component fo the Baader UFC system: In this, our 3rd part of the Baader Universal Filter Changer (UFC) system, we will look a little more closely at the UFC... -
May 27, 2019Baader Universal Filter Changer (UFC): The UFC...
The UFC Camera Adaptors: In this latest blog on the Baader UFC System, we will look at the UFC camera-side adaptors. At present there are nine (9) different adaptors that will... -
June 18, 2019Baader Universal Filter Changer (UFC): The UFC...
The UFC Telescope Adaptors: This blog continues our series on the Baader Universal Filter Changer (UFC) system, with this one giving an overview of the telescope-side adaptors. Attaching a UFC... -
June 26, 2019Baader Universal Filter Changer (UFC): Visual use...
Visual Use Example: Now that we have covered the main overview of the Baader UFC system in our previous blogs (parts 1-to-5), we thought it would be appropriate to give... -
August 1, 2019Baader Universal Filter Changer (UFC): Simple photographic...
Photographic Use Example: We've been asked a few times recently on how to set up the Baader UFC for use with a DSLR and a range of wide-field imaging refracting... -
January 15, 2020Baader's RASA 8" UFC telescope-side adaptor (Part...
Smaller-Sized Filters with Baader UFC-System : It may only be an adaptor but this little piece of anodised metal will let you use a range of popular astroimaging cameras with... -
March 6, 2018Free Download: 3D-printable UFC-Case for filter sliders
UPDATE: Baader UFC-Case, 3D-printed Baader UFC-Case, 3D-printed (#2459195, € 75,-) with screw connection as hinge now available for order By popular request, we have published not only the simplified print... -
January 18, 2018Testreport ATT 1/2018 Baader-UFC - the Swiss...
The current issue of Astronomy Technology Today introduces the UFC System - the tester was impressed: What do you get if you cross an Erector Set with some giant metal...
-
Additional Information
| Manufacturer | Baader Planetarium |
|---|---|
| SKU (#) | 2459127 |
| EAN Code | 4047825033673 |
| Net weight (kg) | 0.01 |
| Optical length (mm) | 1 |
| Inner Diameter / Clear Aperture (mm) | 64 |
| Outer Diameter | 75 |
| Outer Connection (lens sided) | Thread, M68 x 1 |
| Outer Connection (eyepiece/-camera-sided) | Dovetail ring, S70 |
| Type of Adapter | Changer Adapter |
FAQ
-
Please click on title to open or open/close all FAQs
-
HALOS – viewed without prejudice
The current issue of Astronomy Technology Today introduces the UFC System - the tester was impressed:What do you get if you cross an Erector Set with some giant metal washers, a plethora of variously-sized openings, a filter tray that slots in like a clip in a Glock, and, well, all sorts of other stuff? The Baader Universal Filter Changer, or UFC for short. And when Baader says “universal,” they mean it.
Read the Testreport ATT 1/2018 Baader-UFC . Mark Zaslove shows all wonderful things you can do with the Baader UFC (Universal Filter Changer).
-
Unmounted Filters – which side should face the telescope?
For our CMOS-optimized filters we have created the following images showing which side of the filter should face the telescope.
LEGACY FAQ for older unmounted CCD-Filters without black outer rim
Question in Detail:
I just bought LRGB 36mm unmounted filters. I have question: which side of filter should be placed towards telescope? Is it better way of distinguish than "more shiny surface towards telescope"?
Answer:
Always put the more reflective side towards the telescope side. To guide you we already put a small arrow on the filter rim, on those filters were the position matters. This arrow indicates which face of the filter should be directed towards the sky (telescope-sided). All cell-mounted filters are already oriented in a way that the most appropriate filter face is facing the sky when the filter would be mounted directly onto the front end of the nosepiece of a camera.
If you mount your filter the other way, any reflected light would have a short way to the camera sensor, resulting in a higher risk of getting some kind of back-reflections inside the camera field. Many sensors have highly reflective areas near to the light sensitive area, also the area with the bonding contacts is sometimes highly reflective.But: this is true only for instruments without optical elements near to the focal plane. If you have f.e. a coma corrector, field flattener, focal reducer, focal extender (to a lower degree due to concave surface), or in extreme cases a whole lens group for more complex field corrections a few centimeters in front of the filter it could be useful to flip the filter against the rule from above (thus having the arrow pointing away from the telescope). Cause in such cases the likelihood of reflections from the sensor could be lesser then fort- and back- reflections from such glass-surfaces. If in doubt, it helps to make some test images from a star field with bright stars, using the filter in both ways for comparison.
Should you really have some reflections with both positions it can be more effective to add a spacer between filter and camera, eventually shifting the reflection out of the image field. With focal correctors having curved surfaces changing the filter-lens distance could help also.
-
Off-standard single filter sizes from Baader - why not:
Quite often we receive requests for a single filter in an off-standard size. In all cases we are sorry that we must answer as follows:
Sorry (we know it would be so very much cheaper in production - and we would be so much more flexible to fill special requests) - but we have decided long ago to not cut or saw our filters from large plates because this would leave the coating stack open and mutilated (with microscopic cracks) all around, prone to aging and peeling.
Many times we had the chance to inspect our competitors filters after several years of use (due to our 30+years of servicing SBIG-CCD-cameras/and filter wheels) and we realized already 15 years ago how moisture and heat stress can deteriorate even most modern hard coatings, slowly peeling off from the carrying substrate over time, unless the coating stack is sealed all around the filter stack.
As a consequence - in order to create our filters to remain impermeable - we only offer all filter substrates already cut to final shape and run each substrate on an double deck auto-polisher to achieve perfect optical flatness and freedom from cone errors.
Then we do individually coat these substrates in 500 pc per run as minimum to fill a complete coating chamber, in a way that the coating stack (many times 50+ layers) applied onto each filter won't reach to the very edge of the round or square substrate, so that the coating stack remains completely sealed from all sides. In this way we can ensure that our filters will not age at all.The sad effect is that we cannot offer other sizes unless the inquired production quantity were in the range of 250 to 500 pc (depending on size) and the tooling rings or square holders will be paid for, which serve to precisely center each individual filter substrate within the rotating calotte inside the coating chamber. Sorry - as explained above - we just will not coat onto large plates and cut any shape from them, also because such large plates cannot be polished optically flat in the same way we do it.
For your most urgent need and for single piece solutions we can only recommend to order the next larger size of our respective filter and have that cut to shape by an ophtalmologist locally. We can supply the round filters without the metal cell in such cases; square filters come without cell in any case.
Bedienungsanleitungen
Technical Drawings
Testberichte
> 300 Downloads
Test Reviews
