Product Questions and Answers
Do you have a question about this product? Then we would like to ask you to first look through the existing questions and answers, most likely your question has already been answered and you will get the desired information much faster this way. Your question is not listed? Then please click on the button "Ask a question".
Sort by
- Description
-
Details
Baader Semi-Apo Filter
Combination of "Neodymium Moon & Skyglow" and "Fringe Killer" Filters
Time and time again we were made aware of customers who were combining our Neodymium Moon and Skyglow filter with our Fringe Killers to deliver amazingly colour-corrected images to achromatic refractors. This combination however did produce refelctions.
After analysing these reports we developed our Baader Semi-APO filter with IR blocker, a reflection-free combination of the Moon & Skyglow with a stronger coating of the Fringe killer. This result was a virtually colour-neutral image without the blue and red halos (violet fringing) and an increase to image contrast.
Related Articles
-
APF-R : Absolute Point of Focus
APF-R goes online as official plugin in Adobe Photoshop Christoph Kaltseis is a Photoshop expert and an experienced astrophotographer. In recent years, he has developed APF-R (Absolute Point of Focus), an innovative image sharpening process in Photoshop that has attracted considerable interest among experts. The Hubble Space Telescope team has been using his method for over 2 years. Adobe Photoshop has now introduced the easy-to-use APF-R Photoshop CC plugin for Christoph's complex process. The tool sharpens images using APF-R with just a few clicks, even without much prior knowledge. The plugin has already proven many times that it can meet even the high quality standards in astrophotography. Read a very interesting in-depth interview with Christoph Kaltseis on Picture Instruments about his experiences in astrophotography. Christoph reveals the tricks he uses to get the finest details out of his stunning images: "The secret behind Christoph Kaltseis astro images" on Picture Instruments - News (picture-instruments.com) It's not everyday that one could find a new sharpening technique or algorithm that would increase the sharpness of delicate threads of a nebula or dust lanes at the bright centre of a galaxy without significantly increasing noises or over-saturating stars in astronomical images. So when APF-R...
-
HALOS – viewed without prejudice
The moment you insert any type of filter into the optical setup, which consists of your specific camera, the appropriate flattener/reducer or coma corrector and the telescope, the filter becomes part of this unique optical system. And every optical system is different because many products from different manufacturers are involved. All optical surfaces interact with each other in some way. One possibility is that coatings of the camera reflect unwanted light back into the telescope and onto all optical elements in front of the filter. If there is no other optical surface that will reflect the light back to the filter a second time, then it is perfect. There are no halos other than residual halos or scattering, which are unavoidable, depending on the filter design. That's what we mean by our slogan "no halos, no ghosting, no reflections" on our product pages. A filter rarely produces halos itself, which are created inside the filter by internal reflections (this happened to us once in 2015, but we replaced all of these filters). Because the moment there are other surfaces near the filter, it is much more likely that light will be reflected from one of those surfaces, creating halos that...
-
Information about Baader Filters and Filtercells
About Baader Filters The variety of uses for filters in amateur astronomy has considerably increased during the last decade, enabled by both more accurately manufactured optical accessories, and, above all, by the “digital revolution“. In the old days, colour filters for visual planetary observations were not screwed in the front part of the eyepiece, but were simply placed between the eyepiece and the eye. Plane-parallelism of these filter glasses was not important, because they were not in the optical path of the telescope. Today, filters are placed in the optical path of the telescope, even well in front of the focal plane. This definitely requires some degree of plane parallelism and accurate production of the filter glasses. Every single cell mounted filter delivered to our customers is cut as a round or square disc in the according size (1¼", 31mm, 36mm, 2", 50,4mm, 50x50mm, 65x65mm), and then is polished plane to a quarter wavelength on both sides on a computer numerically controlled polisher. After that, the polished blanks are submitted to the costly coating procedures. This sequence is also used for all unmounted filters. We deliberately avoid cutting filters from larger sheets, because the coating layers can be damaged at the edges and suffer from microscopic...
Additional Information
| Technical Data not yet specified | Please choose product variant from dropdown above to see technical data of your chosen product |
|---|
FAQ
-
Please click on title to open or open/close all FAQs
-
HALOS – viewed without prejudice
About Baader Filters
The variety of uses for filters in amateur astronomy has considerably increased during the last decade, enabled by both more accurately manufactured optical accessories, and, above all, by the “digital revolution“.
In the old days, colour filters for visual planetary observations were not screwed in the front part of the eyepiece, but were simply placed between the eyepiece and the eye. Plane-parallelism of these filter glasses was not important, because they were not in the optical path of the telescope.
Today, filters are placed in the optical path of the telescope, even well in front of the focal plane. This definitely requires some degree of plane parallelism and accurate production of the filter glasses.
Baader filter boxes can be attached laterally and above the other to create a sturdy unit. Each filter is then neatly in it's own drawer and characterised from the front with name, number and size of filter.
Every single cell mounted filter delivered to our customers is cut as a round or square disc in the according size (1¼", 31mm, 36mm, 2", 50,4mm, 50x50mm, 65x65mm), and then is polished plane to a quarter wavelength on both sides on a computer numerically controlled polisher. After that, the polished blanks are submitted to the costly coating procedures. This sequence is also used for all unmounted filters.
We deliberately avoid cutting filters from larger sheets, because the coating layers can be damaged at the edges and suffer from microscopic fissures. That lets moisture penetrate and the filters are subject to “ageing”. In particular, this applies to many of the complex dielectric coatings needed for nebular filters, UV/IR blocking filters and emission line filters. Damage to multi-layered filters at the edge results in greater damage than to a single anti-reflection coating. As our filters are not cut-outs, every individual filter disc can then be coated, but not right to the edges. This seals the filter, and no moisture can penetrate into the coating layers. Hence, even the most expensive narrow-band filters are free from ageing, and can be carefully cleaned without hesitation and as often as necessary.
Our UV/IR blocking filters were exposed for 1 hour to boiling water at the company B+W (Schneider Kreuznach, Germany). This accelerated ageing test corresponds to approximately 5 years of filter ageing in actual use. In contrast to cut filters, our edge-sealed filters showed no ageing and above all no changes to the measured transmission at different wavelengths.
The commercial disadvantage of this technology lies in the fact that we cannot produce any filter size by simply cutting it from a sheet. For custom-made filters in a requested size we need a minimum production run of 250 pieces.
High quality optical filters are not cheap. Hence, it is also no surprise if observers complain about „unaccountable“ picture deterioration when using cheap filters in front of binoculars, tele-compressors or Barlow lenses, either visually or photographically. The higher the magnification, the softer and more blurred the picture appears when using a cheap filter, for both visual and photographic observations.
In the manufacturing process great emphasis is placed on guaranteeing that a Baader filter must be bought only once by the customer, because it will be optimally usable for all use kinds of astronomical observations now AND in the future.
Interferogramm of a Filter from an overseas supplier
A stack of coating layers (up to 60 layers depending on the filter complexity) has a considerable thickness and, above all, a different coefficient of expansion than the carrier glass. When this stack of layers is cut at the edges, the entire stack of layers may separate from the carrier glass over time. Baader Planetarium, on the other hand, allows the coating to gradually run out towards the edge. This means that the outermost filter edge (0.5 mm) cannot be used for filtering, but the coating remains sealed permanently.
Ever since we began producing our own filters and series of filters, we have checked the quality of a wide cross-section of „cheap filters“ from different manufacturers (see picture on the right). Many filter manufacturers - mainly in Asia – apparently still take the view that a filter is used only close to the focal plane, and that, hence, a homogeneous glass substrate is not necessary and that it need not be polished fine optically.
They say that if only one cosmetically flawless, smooth glass surface is required, it is not necessary to achieve a high degree of plane-parallel polish. They further believe it is adequate to cut filters from a big stained glass sheet – usually in the format 20x20 cm – and to so-called “raw polish” the filter on both sides. With this process, the glass surface is slightly molten and all saw scratches and surface inaccuracies are invisibly levelled. But so-called „raw-polished“ glass surfaces are completely irregular and deform the wave front of the light significantly!
The “polished“ sheet is coated as the whole, and afterwards the filters are cut out in the desired size. This production method for filters is drastically less expensive than the substantially more sophisticated manufacturing of a Baader filter. In addition, different sized filters can be cut on demand, reducing inventory costs.
Such a “cheap filter“ with irregular glass surfaces MUST always be screwed directly into the eyepiece; otherwise sharpness and definition are reduced, above all when doing observations at high magnification or long-focus photography with an inserted Barlow lens.
About Baader Filter cells
Or: why Baader Filters may "clatter"
Interferogramm of a loosely mounted Baader filter glass
Interferogramm of a tightly locked Baader filter glass
After putting flawlessly performing filter blanks into the standard tightly-screwed filter cells, interferometer measurements revealed drastic deformations caused by the stresses of assembly.
That‘s why all our filters are no longer tightly fixed but held spring-loaded in the filter cell. The filter glass may ever so slightly „clatter“ in the cell, but that neither affects the image quality nor shows a displacement in the final image. A stress-free filter, not tightly fixed in its filter cell, is not a fault and entirely intentional.
Visual observations and astrophotographs obtained with Baader filters are among the best achieved worldwide by amateur astronomers. You may find typical examples using our emission line filters and LRGB filters online, for example at: http://panther-observatory.com/
(Size: 498.7 KB)
> 300 Downloads
