Fragen zum Produkt
What step down adapter is suggested from a 52 mm to "-- mm"?
For adapting any cell mounted Baader 2 inch Filter onto a camera lens with 52mm front filter thread you will need:
#2408166 Baader DSLR 2" Filter-Holder M48/SP54: http://www.baader-planetarium.com/en/baader-dslr-2%22-filter-holder-m48sp54.html
#2958052 Baader Lens-Adapter-Ring SP 54/ M52: http://www.baader-planetarium.com/en/baader-hyperion-dt-ring-sp54m52-for-dtadapter-iiandiii-and-hyperion-eyepieces.html
Alle gefassten Filter sind bereits in der richtigen Position, so dass die korrekte Filterseite Richtung Optik zeigt, wenn der Filter direkt in eine 2" oder 1¼" Steckhülse mit Filtergewinde eingebaut wird.
Both thread sizes come with our proprietary pitch - which is not the same for the female and male threads.
This is our own proprietary "emergency solution" for uniting a world were manufacturers all over the world copy from each other - to the point that there are almost a dozend different pitches in use for male and female threads. Traditionally US-companies used to do a UNF-based pitch and the rest of the world went for metric threads - but these do vary from 0.5 to 0.75.
For this reason it does not make sense to publish our non standard pitch because our pitch is made to cope with all existing metric and US-pitch standards - and as said - our solution has evolved from sheer necessity. It is a mixture of a queer pitch and under-/over-dimensioning . We will not want to declare this as a standard and get bashed up for it. It works for us and is a result of 20 years adapation to fit our filters onto all crazy threads we have seen. And inspite of this - every now and then there comes another "dragonboat-eyepiece" were even our filters may not fit...
der Enforced H-alpha Filter sieht ja mit 3,5 nm HWB hochinteressant aus. Sind weitere "Enforced" Filter etwa für SII oder OIII geplant?
- Weitere Informationen
|Filterfassung||gefasst (LPFC 6mm)|